aws_sdk_dynamodb/operation/delete_table/
builders.rs

1// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
2pub use crate::operation::delete_table::_delete_table_output::DeleteTableOutputBuilder;
3
4pub use crate::operation::delete_table::_delete_table_input::DeleteTableInputBuilder;
5
6impl crate::operation::delete_table::builders::DeleteTableInputBuilder {
7    /// Sends a request with this input using the given client.
8    pub async fn send_with(
9        self,
10        client: &crate::Client,
11    ) -> ::std::result::Result<
12        crate::operation::delete_table::DeleteTableOutput,
13        ::aws_smithy_runtime_api::client::result::SdkError<
14            crate::operation::delete_table::DeleteTableError,
15            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
16        >,
17    > {
18        let mut fluent_builder = client.delete_table();
19        fluent_builder.inner = self;
20        fluent_builder.send().await
21    }
22}
23/// Fluent builder constructing a request to `DeleteTable`.
24///
25/// <p>The <code>DeleteTable</code> operation deletes a table and all of its items. After a <code>DeleteTable</code> request, the specified table is in the <code>DELETING</code> state until DynamoDB completes the deletion. If the table is in the <code>ACTIVE</code> state, you can delete it. If a table is in <code>CREATING</code> or <code>UPDATING</code> states, then DynamoDB returns a <code>ResourceInUseException</code>. If the specified table does not exist, DynamoDB returns a <code>ResourceNotFoundException</code>. If table is already in the <code>DELETING</code> state, no error is returned.</p><important>
26/// <p>For global tables, this operation only applies to global tables using Version 2019.11.21 (Current version).</p>
27/// </important> <note>
28/// <p>DynamoDB might continue to accept data read and write operations, such as <code>GetItem</code> and <code>PutItem</code>, on a table in the <code>DELETING</code> state until the table deletion is complete. For the full list of table states, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_TableDescription.html#DDB-Type-TableDescription-TableStatus">TableStatus</a>.</p>
29/// </note>
30/// <p>When you delete a table, any indexes on that table are also deleted.</p>
31/// <p>If you have DynamoDB Streams enabled on the table, then the corresponding stream on that table goes into the <code>DISABLED</code> state, and the stream is automatically deleted after 24 hours.</p>
32/// <p>Use the <code>DescribeTable</code> action to check the status of the table.</p>
33#[derive(::std::clone::Clone, ::std::fmt::Debug)]
34pub struct DeleteTableFluentBuilder {
35    handle: ::std::sync::Arc<crate::client::Handle>,
36    inner: crate::operation::delete_table::builders::DeleteTableInputBuilder,
37    config_override: ::std::option::Option<crate::config::Builder>,
38}
39impl
40    crate::client::customize::internal::CustomizableSend<
41        crate::operation::delete_table::DeleteTableOutput,
42        crate::operation::delete_table::DeleteTableError,
43    > for DeleteTableFluentBuilder
44{
45    fn send(
46        self,
47        config_override: crate::config::Builder,
48    ) -> crate::client::customize::internal::BoxFuture<
49        crate::client::customize::internal::SendResult<
50            crate::operation::delete_table::DeleteTableOutput,
51            crate::operation::delete_table::DeleteTableError,
52        >,
53    > {
54        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
55    }
56}
57impl DeleteTableFluentBuilder {
58    /// Creates a new `DeleteTableFluentBuilder`.
59    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
60        Self {
61            handle,
62            inner: ::std::default::Default::default(),
63            config_override: ::std::option::Option::None,
64        }
65    }
66    /// Access the DeleteTable as a reference.
67    pub fn as_input(&self) -> &crate::operation::delete_table::builders::DeleteTableInputBuilder {
68        &self.inner
69    }
70    /// Sends the request and returns the response.
71    ///
72    /// If an error occurs, an `SdkError` will be returned with additional details that
73    /// can be matched against.
74    ///
75    /// By default, any retryable failures will be retried twice. Retry behavior
76    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
77    /// set when configuring the client.
78    pub async fn send(
79        self,
80    ) -> ::std::result::Result<
81        crate::operation::delete_table::DeleteTableOutput,
82        ::aws_smithy_runtime_api::client::result::SdkError<
83            crate::operation::delete_table::DeleteTableError,
84            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
85        >,
86    > {
87        let input = self
88            .inner
89            .build()
90            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
91        let runtime_plugins = crate::operation::delete_table::DeleteTable::operation_runtime_plugins(
92            self.handle.runtime_plugins.clone(),
93            &self.handle.conf,
94            self.config_override,
95        );
96        crate::operation::delete_table::DeleteTable::orchestrate(&runtime_plugins, input).await
97    }
98
99    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
100    pub fn customize(
101        self,
102    ) -> crate::client::customize::CustomizableOperation<
103        crate::operation::delete_table::DeleteTableOutput,
104        crate::operation::delete_table::DeleteTableError,
105        Self,
106    > {
107        crate::client::customize::CustomizableOperation::new(self)
108    }
109    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
110        self.set_config_override(::std::option::Option::Some(config_override.into()));
111        self
112    }
113
114    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
115        self.config_override = config_override;
116        self
117    }
118    /// <p>The name of the table to delete. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</p>
119    pub fn table_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
120        self.inner = self.inner.table_name(input.into());
121        self
122    }
123    /// <p>The name of the table to delete. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</p>
124    pub fn set_table_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
125        self.inner = self.inner.set_table_name(input);
126        self
127    }
128    /// <p>The name of the table to delete. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</p>
129    pub fn get_table_name(&self) -> &::std::option::Option<::std::string::String> {
130        self.inner.get_table_name()
131    }
132}
aws_sdk_dynamodb/operation/delete_table/builders.rs

aws_sdk_dynamodb/operation/delete_table/
builders.rs
