aws_sdk_dynamodb/operation/describe_continuous_backups/
builders.rs

1// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
2pub use crate::operation::describe_continuous_backups::_describe_continuous_backups_output::DescribeContinuousBackupsOutputBuilder;
3
4pub use crate::operation::describe_continuous_backups::_describe_continuous_backups_input::DescribeContinuousBackupsInputBuilder;
5
6impl crate::operation::describe_continuous_backups::builders::DescribeContinuousBackupsInputBuilder {
7    /// Sends a request with this input using the given client.
8    pub async fn send_with(
9        self,
10        client: &crate::Client,
11    ) -> ::std::result::Result<
12        crate::operation::describe_continuous_backups::DescribeContinuousBackupsOutput,
13        ::aws_smithy_runtime_api::client::result::SdkError<
14            crate::operation::describe_continuous_backups::DescribeContinuousBackupsError,
15            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
16        >,
17    > {
18        let mut fluent_builder = client.describe_continuous_backups();
19        fluent_builder.inner = self;
20        fluent_builder.send().await
21    }
22}
23/// Fluent builder constructing a request to `DescribeContinuousBackups`.
24///
25/// <p>Checks the status of continuous backups and point in time recovery on the specified table. Continuous backups are <code>ENABLED</code> on all tables at table creation. If point in time recovery is enabled, <code>PointInTimeRecoveryStatus</code> will be set to ENABLED.</p>
26/// <p>After continuous backups and point in time recovery are enabled, you can restore to any point in time within <code>EarliestRestorableDateTime</code> and <code>LatestRestorableDateTime</code>.</p>
27/// <p><code>LatestRestorableDateTime</code> is typically 5 minutes before the current time. You can restore your table to any point in time in the last 35 days. You can set the recovery period to any value between 1 and 35 days.</p>
28/// <p>You can call <code>DescribeContinuousBackups</code> at a maximum rate of 10 times per second.</p>
29#[derive(::std::clone::Clone, ::std::fmt::Debug)]
30pub struct DescribeContinuousBackupsFluentBuilder {
31    handle: ::std::sync::Arc<crate::client::Handle>,
32    inner: crate::operation::describe_continuous_backups::builders::DescribeContinuousBackupsInputBuilder,
33    config_override: ::std::option::Option<crate::config::Builder>,
34}
35impl
36    crate::client::customize::internal::CustomizableSend<
37        crate::operation::describe_continuous_backups::DescribeContinuousBackupsOutput,
38        crate::operation::describe_continuous_backups::DescribeContinuousBackupsError,
39    > for DescribeContinuousBackupsFluentBuilder
40{
41    fn send(
42        self,
43        config_override: crate::config::Builder,
44    ) -> crate::client::customize::internal::BoxFuture<
45        crate::client::customize::internal::SendResult<
46            crate::operation::describe_continuous_backups::DescribeContinuousBackupsOutput,
47            crate::operation::describe_continuous_backups::DescribeContinuousBackupsError,
48        >,
49    > {
50        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
51    }
52}
53impl DescribeContinuousBackupsFluentBuilder {
54    /// Creates a new `DescribeContinuousBackupsFluentBuilder`.
55    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
56        Self {
57            handle,
58            inner: ::std::default::Default::default(),
59            config_override: ::std::option::Option::None,
60        }
61    }
62    /// Access the DescribeContinuousBackups as a reference.
63    pub fn as_input(&self) -> &crate::operation::describe_continuous_backups::builders::DescribeContinuousBackupsInputBuilder {
64        &self.inner
65    }
66    /// Sends the request and returns the response.
67    ///
68    /// If an error occurs, an `SdkError` will be returned with additional details that
69    /// can be matched against.
70    ///
71    /// By default, any retryable failures will be retried twice. Retry behavior
72    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
73    /// set when configuring the client.
74    pub async fn send(
75        self,
76    ) -> ::std::result::Result<
77        crate::operation::describe_continuous_backups::DescribeContinuousBackupsOutput,
78        ::aws_smithy_runtime_api::client::result::SdkError<
79            crate::operation::describe_continuous_backups::DescribeContinuousBackupsError,
80            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
81        >,
82    > {
83        let input = self
84            .inner
85            .build()
86            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
87        let runtime_plugins = crate::operation::describe_continuous_backups::DescribeContinuousBackups::operation_runtime_plugins(
88            self.handle.runtime_plugins.clone(),
89            &self.handle.conf,
90            self.config_override,
91        );
92        crate::operation::describe_continuous_backups::DescribeContinuousBackups::orchestrate(&runtime_plugins, input).await
93    }
94
95    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
96    pub fn customize(
97        self,
98    ) -> crate::client::customize::CustomizableOperation<
99        crate::operation::describe_continuous_backups::DescribeContinuousBackupsOutput,
100        crate::operation::describe_continuous_backups::DescribeContinuousBackupsError,
101        Self,
102    > {
103        crate::client::customize::CustomizableOperation::new(self)
104    }
105    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
106        self.set_config_override(::std::option::Option::Some(config_override.into()));
107        self
108    }
109
110    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
111        self.config_override = config_override;
112        self
113    }
114    /// <p>Name of the table for which the customer wants to check the continuous backups and point in time recovery settings.</p>
115    /// <p>You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</p>
116    pub fn table_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
117        self.inner = self.inner.table_name(input.into());
118        self
119    }
120    /// <p>Name of the table for which the customer wants to check the continuous backups and point in time recovery settings.</p>
121    /// <p>You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</p>
122    pub fn set_table_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
123        self.inner = self.inner.set_table_name(input);
124        self
125    }
126    /// <p>Name of the table for which the customer wants to check the continuous backups and point in time recovery settings.</p>
127    /// <p>You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</p>
128    pub fn get_table_name(&self) -> &::std::option::Option<::std::string::String> {
129        self.inner.get_table_name()
130    }
131}
aws_sdk_dynamodb/operation/describe_continuous_backups/builders.rs

aws_sdk_dynamodb/operation/describe_continuous_backups/
builders.rs
