// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::query::_query_output::QueryOutputBuilder;

pub use crate::operation::query::_query_input::QueryInputBuilder;

impl crate::operation::query::builders::QueryInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::query::QueryOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::query::QueryError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.query();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `Query`.
///
/// <p>You must provide the name of the partition key attribute and a single value for that attribute. <code>Query</code> returns all items with that partition key value. Optionally, you can provide a sort key attribute and use a comparison operator to refine the search results.</p>
/// <p>Use the <code>KeyConditionExpression</code> parameter to provide a specific value for the partition key. The <code>Query</code> operation will return all of the items from the table or index with that partition key value. You can optionally narrow the scope of the <code>Query</code> operation by specifying a sort key value and a comparison operator in <code>KeyConditionExpression</code>. To further refine the <code>Query</code> results, you can optionally provide a <code>FilterExpression</code>. A <code>FilterExpression</code> determines which items within the results should be returned to you. All of the other results are discarded.</p>
/// <p>A <code>Query</code> operation always returns a result set. If no matching items are found, the result set will be empty. Queries that do not return results consume the minimum number of read capacity units for that type of read operation.</p><note>
/// <p>DynamoDB calculates the number of read capacity units consumed based on item size, not on the amount of data that is returned to an application. The number of capacity units consumed will be the same whether you request all of the attributes (the default behavior) or just some of them (using a projection expression). The number will also be the same whether or not you use a <code>FilterExpression</code>.</p>
/// </note>
/// <p><code>Query</code> results are always sorted by the sort key value. If the data type of the sort key is Number, the results are returned in numeric order; otherwise, the results are returned in order of UTF-8 bytes. By default, the sort order is ascending. To reverse the order, set the <code>ScanIndexForward</code> parameter to false.</p>
/// <p>A single <code>Query</code> operation will read up to the maximum number of items set (if using the <code>Limit</code> parameter) or a maximum of 1 MB of data and then apply any filtering to the results using <code>FilterExpression</code>. If <code>LastEvaluatedKey</code> is present in the response, you will need to paginate the result set. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Query.html#Query.Pagination">Paginating the Results</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
/// <p><code>FilterExpression</code> is applied after a <code>Query</code> finishes, but before the results are returned. A <code>FilterExpression</code> cannot contain partition key or sort key attributes. You need to specify those attributes in the <code>KeyConditionExpression</code>.</p><note>
/// <p>A <code>Query</code> operation can return an empty result set and a <code>LastEvaluatedKey</code> if all the items read for the page of results are filtered out.</p>
/// </note>
/// <p>You can query a table, a local secondary index, or a global secondary index. For a query on a table or on a local secondary index, you can set the <code>ConsistentRead</code> parameter to <code>true</code> and obtain a strongly consistent result. Global secondary indexes support eventually consistent reads only, so do not specify <code>ConsistentRead</code> when querying a global secondary index.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct QueryFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::query::builders::QueryInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl crate::client::customize::internal::CustomizableSend<crate::operation::query::QueryOutput, crate::operation::query::QueryError>
    for QueryFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<crate::operation::query::QueryOutput, crate::operation::query::QueryError>,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl QueryFluentBuilder {
    /// Creates a new `QueryFluentBuilder`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the Query as a reference.
    pub fn as_input(&self) -> &crate::operation::query::builders::QueryInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::query::QueryOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::query::QueryError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins =
            crate::operation::query::Query::operation_runtime_plugins(self.handle.runtime_plugins.clone(), &self.handle.conf, self.config_override);
        crate::operation::query::Query::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<crate::operation::query::QueryOutput, crate::operation::query::QueryError, Self> {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
        self.set_config_override(::std::option::Option::Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// Create a paginator for this request
    ///
    /// Paginators are used by calling [`send().await`](crate::operation::query::paginator::QueryPaginator::send) which returns a [`PaginationStream`](aws_smithy_async::future::pagination_stream::PaginationStream).
    pub fn into_paginator(self) -> crate::operation::query::paginator::QueryPaginator {
        crate::operation::query::paginator::QueryPaginator::new(self.handle, self.inner)
    }
    /// <p>The name of the table containing the requested items. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</p>
    pub fn table_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.table_name(input.into());
        self
    }
    /// <p>The name of the table containing the requested items. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</p>
    pub fn set_table_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_table_name(input);
        self
    }
    /// <p>The name of the table containing the requested items. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</p>
    pub fn get_table_name(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_table_name()
    }
    /// <p>The name of an index to query. This index can be any local secondary index or global secondary index on the table. Note that if you use the <code>IndexName</code> parameter, you must also provide <code>TableName.</code></p>
    pub fn index_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.index_name(input.into());
        self
    }
    /// <p>The name of an index to query. This index can be any local secondary index or global secondary index on the table. Note that if you use the <code>IndexName</code> parameter, you must also provide <code>TableName.</code></p>
    pub fn set_index_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_index_name(input);
        self
    }
    /// <p>The name of an index to query. This index can be any local secondary index or global secondary index on the table. Note that if you use the <code>IndexName</code> parameter, you must also provide <code>TableName.</code></p>
    pub fn get_index_name(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_index_name()
    }
    /// <p>The attributes to be returned in the result. You can retrieve all item attributes, specific item attributes, the count of matching items, or in the case of an index, some or all of the attributes projected into the index.</p>
    /// <ul>
    /// <li>
    /// <p><code>ALL_ATTRIBUTES</code> - Returns all of the item attributes from the specified table or index. If you query a local secondary index, then for each matching item in the index, DynamoDB fetches the entire item from the parent table. If the index is configured to project all item attributes, then all of the data can be obtained from the local secondary index, and no fetching is required.</p></li>
    /// <li>
    /// <p><code>ALL_PROJECTED_ATTRIBUTES</code> - Allowed only when querying an index. Retrieves all attributes that have been projected into the index. If the index is configured to project all attributes, this return value is equivalent to specifying <code>ALL_ATTRIBUTES</code>.</p></li>
    /// <li>
    /// <p><code>COUNT</code> - Returns the number of matching items, rather than the matching items themselves. Note that this uses the same quantity of read capacity units as getting the items, and is subject to the same item size calculations.</p></li>
    /// <li>
    /// <p><code>SPECIFIC_ATTRIBUTES</code> - Returns only the attributes listed in <code>ProjectionExpression</code>. This return value is equivalent to specifying <code>ProjectionExpression</code> without specifying any value for <code>Select</code>.</p>
    /// <p>If you query or scan a local secondary index and request only attributes that are projected into that index, the operation will read only the index and not the table. If any of the requested attributes are not projected into the local secondary index, DynamoDB fetches each of these attributes from the parent table. This extra fetching incurs additional throughput cost and latency.</p>
    /// <p>If you query or scan a global secondary index, you can only request attributes that are projected into the index. Global secondary index queries cannot fetch attributes from the parent table.</p></li>
    /// </ul>
    /// <p>If neither <code>Select</code> nor <code>ProjectionExpression</code> are specified, DynamoDB defaults to <code>ALL_ATTRIBUTES</code> when accessing a table, and <code>ALL_PROJECTED_ATTRIBUTES</code> when accessing an index. You cannot use both <code>Select</code> and <code>ProjectionExpression</code> together in a single request, unless the value for <code>Select</code> is <code>SPECIFIC_ATTRIBUTES</code>. (This usage is equivalent to specifying <code>ProjectionExpression</code> without any value for <code>Select</code>.)</p><note>
    /// <p>If you use the <code>ProjectionExpression</code> parameter, then the value for <code>Select</code> can only be <code>SPECIFIC_ATTRIBUTES</code>. Any other value for <code>Select</code> will return an error.</p>
    /// </note>
    pub fn select(mut self, input: crate::types::Select) -> Self {
        self.inner = self.inner.select(input);
        self
    }
    /// <p>The attributes to be returned in the result. You can retrieve all item attributes, specific item attributes, the count of matching items, or in the case of an index, some or all of the attributes projected into the index.</p>
    /// <ul>
    /// <li>
    /// <p><code>ALL_ATTRIBUTES</code> - Returns all of the item attributes from the specified table or index. If you query a local secondary index, then for each matching item in the index, DynamoDB fetches the entire item from the parent table. If the index is configured to project all item attributes, then all of the data can be obtained from the local secondary index, and no fetching is required.</p></li>
    /// <li>
    /// <p><code>ALL_PROJECTED_ATTRIBUTES</code> - Allowed only when querying an index. Retrieves all attributes that have been projected into the index. If the index is configured to project all attributes, this return value is equivalent to specifying <code>ALL_ATTRIBUTES</code>.</p></li>
    /// <li>
    /// <p><code>COUNT</code> - Returns the number of matching items, rather than the matching items themselves. Note that this uses the same quantity of read capacity units as getting the items, and is subject to the same item size calculations.</p></li>
    /// <li>
    /// <p><code>SPECIFIC_ATTRIBUTES</code> - Returns only the attributes listed in <code>ProjectionExpression</code>. This return value is equivalent to specifying <code>ProjectionExpression</code> without specifying any value for <code>Select</code>.</p>
    /// <p>If you query or scan a local secondary index and request only attributes that are projected into that index, the operation will read only the index and not the table. If any of the requested attributes are not projected into the local secondary index, DynamoDB fetches each of these attributes from the parent table. This extra fetching incurs additional throughput cost and latency.</p>
    /// <p>If you query or scan a global secondary index, you can only request attributes that are projected into the index. Global secondary index queries cannot fetch attributes from the parent table.</p></li>
    /// </ul>
    /// <p>If neither <code>Select</code> nor <code>ProjectionExpression</code> are specified, DynamoDB defaults to <code>ALL_ATTRIBUTES</code> when accessing a table, and <code>ALL_PROJECTED_ATTRIBUTES</code> when accessing an index. You cannot use both <code>Select</code> and <code>ProjectionExpression</code> together in a single request, unless the value for <code>Select</code> is <code>SPECIFIC_ATTRIBUTES</code>. (This usage is equivalent to specifying <code>ProjectionExpression</code> without any value for <code>Select</code>.)</p><note>
    /// <p>If you use the <code>ProjectionExpression</code> parameter, then the value for <code>Select</code> can only be <code>SPECIFIC_ATTRIBUTES</code>. Any other value for <code>Select</code> will return an error.</p>
    /// </note>
    pub fn set_select(mut self, input: ::std::option::Option<crate::types::Select>) -> Self {
        self.inner = self.inner.set_select(input);
        self
    }
    /// <p>The attributes to be returned in the result. You can retrieve all item attributes, specific item attributes, the count of matching items, or in the case of an index, some or all of the attributes projected into the index.</p>
    /// <ul>
    /// <li>
    /// <p><code>ALL_ATTRIBUTES</code> - Returns all of the item attributes from the specified table or index. If you query a local secondary index, then for each matching item in the index, DynamoDB fetches the entire item from the parent table. If the index is configured to project all item attributes, then all of the data can be obtained from the local secondary index, and no fetching is required.</p></li>
    /// <li>
    /// <p><code>ALL_PROJECTED_ATTRIBUTES</code> - Allowed only when querying an index. Retrieves all attributes that have been projected into the index. If the index is configured to project all attributes, this return value is equivalent to specifying <code>ALL_ATTRIBUTES</code>.</p></li>
    /// <li>
    /// <p><code>COUNT</code> - Returns the number of matching items, rather than the matching items themselves. Note that this uses the same quantity of read capacity units as getting the items, and is subject to the same item size calculations.</p></li>
    /// <li>
    /// <p><code>SPECIFIC_ATTRIBUTES</code> - Returns only the attributes listed in <code>ProjectionExpression</code>. This return value is equivalent to specifying <code>ProjectionExpression</code> without specifying any value for <code>Select</code>.</p>
    /// <p>If you query or scan a local secondary index and request only attributes that are projected into that index, the operation will read only the index and not the table. If any of the requested attributes are not projected into the local secondary index, DynamoDB fetches each of these attributes from the parent table. This extra fetching incurs additional throughput cost and latency.</p>
    /// <p>If you query or scan a global secondary index, you can only request attributes that are projected into the index. Global secondary index queries cannot fetch attributes from the parent table.</p></li>
    /// </ul>
    /// <p>If neither <code>Select</code> nor <code>ProjectionExpression</code> are specified, DynamoDB defaults to <code>ALL_ATTRIBUTES</code> when accessing a table, and <code>ALL_PROJECTED_ATTRIBUTES</code> when accessing an index. You cannot use both <code>Select</code> and <code>ProjectionExpression</code> together in a single request, unless the value for <code>Select</code> is <code>SPECIFIC_ATTRIBUTES</code>. (This usage is equivalent to specifying <code>ProjectionExpression</code> without any value for <code>Select</code>.)</p><note>
    /// <p>If you use the <code>ProjectionExpression</code> parameter, then the value for <code>Select</code> can only be <code>SPECIFIC_ATTRIBUTES</code>. Any other value for <code>Select</code> will return an error.</p>
    /// </note>
    pub fn get_select(&self) -> &::std::option::Option<crate::types::Select> {
        self.inner.get_select()
    }
    ///
    /// Appends an item to `AttributesToGet`.
    ///
    /// To override the contents of this collection use [`set_attributes_to_get`](Self::set_attributes_to_get).
    ///
    /// <p>This is a legacy parameter. Use <code>ProjectionExpression</code> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.AttributesToGet.html">AttributesToGet</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn attributes_to_get(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.attributes_to_get(input.into());
        self
    }
    /// <p>This is a legacy parameter. Use <code>ProjectionExpression</code> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.AttributesToGet.html">AttributesToGet</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn set_attributes_to_get(mut self, input: ::std::option::Option<::std::vec::Vec<::std::string::String>>) -> Self {
        self.inner = self.inner.set_attributes_to_get(input);
        self
    }
    /// <p>This is a legacy parameter. Use <code>ProjectionExpression</code> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.AttributesToGet.html">AttributesToGet</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn get_attributes_to_get(&self) -> &::std::option::Option<::std::vec::Vec<::std::string::String>> {
        self.inner.get_attributes_to_get()
    }
    /// <p>The maximum number of items to evaluate (not necessarily the number of matching items). If DynamoDB processes the number of items up to the limit while processing the results, it stops the operation and returns the matching values up to that point, and a key in <code>LastEvaluatedKey</code> to apply in a subsequent operation, so that you can pick up where you left off. Also, if the processed dataset size exceeds 1 MB before DynamoDB reaches this limit, it stops the operation and returns the matching values up to the limit, and a key in <code>LastEvaluatedKey</code> to apply in a subsequent operation to continue the operation. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html">Query and Scan</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn limit(mut self, input: i32) -> Self {
        self.inner = self.inner.limit(input);
        self
    }
    /// <p>The maximum number of items to evaluate (not necessarily the number of matching items). If DynamoDB processes the number of items up to the limit while processing the results, it stops the operation and returns the matching values up to that point, and a key in <code>LastEvaluatedKey</code> to apply in a subsequent operation, so that you can pick up where you left off. Also, if the processed dataset size exceeds 1 MB before DynamoDB reaches this limit, it stops the operation and returns the matching values up to the limit, and a key in <code>LastEvaluatedKey</code> to apply in a subsequent operation to continue the operation. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html">Query and Scan</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn set_limit(mut self, input: ::std::option::Option<i32>) -> Self {
        self.inner = self.inner.set_limit(input);
        self
    }
    /// <p>The maximum number of items to evaluate (not necessarily the number of matching items). If DynamoDB processes the number of items up to the limit while processing the results, it stops the operation and returns the matching values up to that point, and a key in <code>LastEvaluatedKey</code> to apply in a subsequent operation, so that you can pick up where you left off. Also, if the processed dataset size exceeds 1 MB before DynamoDB reaches this limit, it stops the operation and returns the matching values up to the limit, and a key in <code>LastEvaluatedKey</code> to apply in a subsequent operation to continue the operation. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html">Query and Scan</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn get_limit(&self) -> &::std::option::Option<i32> {
        self.inner.get_limit()
    }
    /// <p>Determines the read consistency model: If set to <code>true</code>, then the operation uses strongly consistent reads; otherwise, the operation uses eventually consistent reads.</p>
    /// <p>Strongly consistent reads are not supported on global secondary indexes. If you query a global secondary index with <code>ConsistentRead</code> set to <code>true</code>, you will receive a <code>ValidationException</code>.</p>
    pub fn consistent_read(mut self, input: bool) -> Self {
        self.inner = self.inner.consistent_read(input);
        self
    }
    /// <p>Determines the read consistency model: If set to <code>true</code>, then the operation uses strongly consistent reads; otherwise, the operation uses eventually consistent reads.</p>
    /// <p>Strongly consistent reads are not supported on global secondary indexes. If you query a global secondary index with <code>ConsistentRead</code> set to <code>true</code>, you will receive a <code>ValidationException</code>.</p>
    pub fn set_consistent_read(mut self, input: ::std::option::Option<bool>) -> Self {
        self.inner = self.inner.set_consistent_read(input);
        self
    }
    /// <p>Determines the read consistency model: If set to <code>true</code>, then the operation uses strongly consistent reads; otherwise, the operation uses eventually consistent reads.</p>
    /// <p>Strongly consistent reads are not supported on global secondary indexes. If you query a global secondary index with <code>ConsistentRead</code> set to <code>true</code>, you will receive a <code>ValidationException</code>.</p>
    pub fn get_consistent_read(&self) -> &::std::option::Option<bool> {
        self.inner.get_consistent_read()
    }
    ///
    /// Adds a key-value pair to `KeyConditions`.
    ///
    /// To override the contents of this collection use [`set_key_conditions`](Self::set_key_conditions).
    ///
    /// <p>This is a legacy parameter. Use <code>KeyConditionExpression</code> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.KeyConditions.html">KeyConditions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn key_conditions(mut self, k: impl ::std::convert::Into<::std::string::String>, v: crate::types::Condition) -> Self {
        self.inner = self.inner.key_conditions(k.into(), v);
        self
    }
    /// <p>This is a legacy parameter. Use <code>KeyConditionExpression</code> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.KeyConditions.html">KeyConditions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn set_key_conditions(
        mut self,
        input: ::std::option::Option<::std::collections::HashMap<::std::string::String, crate::types::Condition>>,
    ) -> Self {
        self.inner = self.inner.set_key_conditions(input);
        self
    }
    /// <p>This is a legacy parameter. Use <code>KeyConditionExpression</code> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.KeyConditions.html">KeyConditions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn get_key_conditions(&self) -> &::std::option::Option<::std::collections::HashMap<::std::string::String, crate::types::Condition>> {
        self.inner.get_key_conditions()
    }
    ///
    /// Adds a key-value pair to `QueryFilter`.
    ///
    /// To override the contents of this collection use [`set_query_filter`](Self::set_query_filter).
    ///
    /// <p>This is a legacy parameter. Use <code>FilterExpression</code> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.QueryFilter.html">QueryFilter</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn query_filter(mut self, k: impl ::std::convert::Into<::std::string::String>, v: crate::types::Condition) -> Self {
        self.inner = self.inner.query_filter(k.into(), v);
        self
    }
    /// <p>This is a legacy parameter. Use <code>FilterExpression</code> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.QueryFilter.html">QueryFilter</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn set_query_filter(
        mut self,
        input: ::std::option::Option<::std::collections::HashMap<::std::string::String, crate::types::Condition>>,
    ) -> Self {
        self.inner = self.inner.set_query_filter(input);
        self
    }
    /// <p>This is a legacy parameter. Use <code>FilterExpression</code> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.QueryFilter.html">QueryFilter</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn get_query_filter(&self) -> &::std::option::Option<::std::collections::HashMap<::std::string::String, crate::types::Condition>> {
        self.inner.get_query_filter()
    }
    /// <p>This is a legacy parameter. Use <code>FilterExpression</code> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html">ConditionalOperator</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn conditional_operator(mut self, input: crate::types::ConditionalOperator) -> Self {
        self.inner = self.inner.conditional_operator(input);
        self
    }
    /// <p>This is a legacy parameter. Use <code>FilterExpression</code> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html">ConditionalOperator</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn set_conditional_operator(mut self, input: ::std::option::Option<crate::types::ConditionalOperator>) -> Self {
        self.inner = self.inner.set_conditional_operator(input);
        self
    }
    /// <p>This is a legacy parameter. Use <code>FilterExpression</code> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html">ConditionalOperator</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn get_conditional_operator(&self) -> &::std::option::Option<crate::types::ConditionalOperator> {
        self.inner.get_conditional_operator()
    }
    /// <p>Specifies the order for index traversal: If <code>true</code> (default), the traversal is performed in ascending order; if <code>false</code>, the traversal is performed in descending order.</p>
    /// <p>Items with the same partition key value are stored in sorted order by sort key. If the sort key data type is Number, the results are stored in numeric order. For type String, the results are stored in order of UTF-8 bytes. For type Binary, DynamoDB treats each byte of the binary data as unsigned.</p>
    /// <p>If <code>ScanIndexForward</code> is <code>true</code>, DynamoDB returns the results in the order in which they are stored (by sort key value). This is the default behavior. If <code>ScanIndexForward</code> is <code>false</code>, DynamoDB reads the results in reverse order by sort key value, and then returns the results to the client.</p>
    pub fn scan_index_forward(mut self, input: bool) -> Self {
        self.inner = self.inner.scan_index_forward(input);
        self
    }
    /// <p>Specifies the order for index traversal: If <code>true</code> (default), the traversal is performed in ascending order; if <code>false</code>, the traversal is performed in descending order.</p>
    /// <p>Items with the same partition key value are stored in sorted order by sort key. If the sort key data type is Number, the results are stored in numeric order. For type String, the results are stored in order of UTF-8 bytes. For type Binary, DynamoDB treats each byte of the binary data as unsigned.</p>
    /// <p>If <code>ScanIndexForward</code> is <code>true</code>, DynamoDB returns the results in the order in which they are stored (by sort key value). This is the default behavior. If <code>ScanIndexForward</code> is <code>false</code>, DynamoDB reads the results in reverse order by sort key value, and then returns the results to the client.</p>
    pub fn set_scan_index_forward(mut self, input: ::std::option::Option<bool>) -> Self {
        self.inner = self.inner.set_scan_index_forward(input);
        self
    }
    /// <p>Specifies the order for index traversal: If <code>true</code> (default), the traversal is performed in ascending order; if <code>false</code>, the traversal is performed in descending order.</p>
    /// <p>Items with the same partition key value are stored in sorted order by sort key. If the sort key data type is Number, the results are stored in numeric order. For type String, the results are stored in order of UTF-8 bytes. For type Binary, DynamoDB treats each byte of the binary data as unsigned.</p>
    /// <p>If <code>ScanIndexForward</code> is <code>true</code>, DynamoDB returns the results in the order in which they are stored (by sort key value). This is the default behavior. If <code>ScanIndexForward</code> is <code>false</code>, DynamoDB reads the results in reverse order by sort key value, and then returns the results to the client.</p>
    pub fn get_scan_index_forward(&self) -> &::std::option::Option<bool> {
        self.inner.get_scan_index_forward()
    }
    ///
    /// Adds a key-value pair to `ExclusiveStartKey`.
    ///
    /// To override the contents of this collection use [`set_exclusive_start_key`](Self::set_exclusive_start_key).
    ///
    /// <p>The primary key of the first item that this operation will evaluate. Use the value that was returned for <code>LastEvaluatedKey</code> in the previous operation.</p>
    /// <p>The data type for <code>ExclusiveStartKey</code> must be String, Number, or Binary. No set data types are allowed.</p>
    pub fn exclusive_start_key(mut self, k: impl ::std::convert::Into<::std::string::String>, v: crate::types::AttributeValue) -> Self {
        self.inner = self.inner.exclusive_start_key(k.into(), v);
        self
    }
    /// <p>The primary key of the first item that this operation will evaluate. Use the value that was returned for <code>LastEvaluatedKey</code> in the previous operation.</p>
    /// <p>The data type for <code>ExclusiveStartKey</code> must be String, Number, or Binary. No set data types are allowed.</p>
    pub fn set_exclusive_start_key(
        mut self,
        input: ::std::option::Option<::std::collections::HashMap<::std::string::String, crate::types::AttributeValue>>,
    ) -> Self {
        self.inner = self.inner.set_exclusive_start_key(input);
        self
    }
    /// <p>The primary key of the first item that this operation will evaluate. Use the value that was returned for <code>LastEvaluatedKey</code> in the previous operation.</p>
    /// <p>The data type for <code>ExclusiveStartKey</code> must be String, Number, or Binary. No set data types are allowed.</p>
    pub fn get_exclusive_start_key(
        &self,
    ) -> &::std::option::Option<::std::collections::HashMap<::std::string::String, crate::types::AttributeValue>> {
        self.inner.get_exclusive_start_key()
    }
    /// <p>Determines the level of detail about either provisioned or on-demand throughput consumption that is returned in the response:</p>
    /// <ul>
    /// <li>
    /// <p><code>INDEXES</code> - The response includes the aggregate <code>ConsumedCapacity</code> for the operation, together with <code>ConsumedCapacity</code> for each table and secondary index that was accessed.</p>
    /// <p>Note that some operations, such as <code>GetItem</code> and <code>BatchGetItem</code>, do not access any indexes at all. In these cases, specifying <code>INDEXES</code> will only return <code>ConsumedCapacity</code> information for table(s).</p></li>
    /// <li>
    /// <p><code>TOTAL</code> - The response includes only the aggregate <code>ConsumedCapacity</code> for the operation.</p></li>
    /// <li>
    /// <p><code>NONE</code> - No <code>ConsumedCapacity</code> details are included in the response.</p></li>
    /// </ul>
    pub fn return_consumed_capacity(mut self, input: crate::types::ReturnConsumedCapacity) -> Self {
        self.inner = self.inner.return_consumed_capacity(input);
        self
    }
    /// <p>Determines the level of detail about either provisioned or on-demand throughput consumption that is returned in the response:</p>
    /// <ul>
    /// <li>
    /// <p><code>INDEXES</code> - The response includes the aggregate <code>ConsumedCapacity</code> for the operation, together with <code>ConsumedCapacity</code> for each table and secondary index that was accessed.</p>
    /// <p>Note that some operations, such as <code>GetItem</code> and <code>BatchGetItem</code>, do not access any indexes at all. In these cases, specifying <code>INDEXES</code> will only return <code>ConsumedCapacity</code> information for table(s).</p></li>
    /// <li>
    /// <p><code>TOTAL</code> - The response includes only the aggregate <code>ConsumedCapacity</code> for the operation.</p></li>
    /// <li>
    /// <p><code>NONE</code> - No <code>ConsumedCapacity</code> details are included in the response.</p></li>
    /// </ul>
    pub fn set_return_consumed_capacity(mut self, input: ::std::option::Option<crate::types::ReturnConsumedCapacity>) -> Self {
        self.inner = self.inner.set_return_consumed_capacity(input);
        self
    }
    /// <p>Determines the level of detail about either provisioned or on-demand throughput consumption that is returned in the response:</p>
    /// <ul>
    /// <li>
    /// <p><code>INDEXES</code> - The response includes the aggregate <code>ConsumedCapacity</code> for the operation, together with <code>ConsumedCapacity</code> for each table and secondary index that was accessed.</p>
    /// <p>Note that some operations, such as <code>GetItem</code> and <code>BatchGetItem</code>, do not access any indexes at all. In these cases, specifying <code>INDEXES</code> will only return <code>ConsumedCapacity</code> information for table(s).</p></li>
    /// <li>
    /// <p><code>TOTAL</code> - The response includes only the aggregate <code>ConsumedCapacity</code> for the operation.</p></li>
    /// <li>
    /// <p><code>NONE</code> - No <code>ConsumedCapacity</code> details are included in the response.</p></li>
    /// </ul>
    pub fn get_return_consumed_capacity(&self) -> &::std::option::Option<crate::types::ReturnConsumedCapacity> {
        self.inner.get_return_consumed_capacity()
    }
    /// <p>A string that identifies one or more attributes to retrieve from the table. These attributes can include scalars, sets, or elements of a JSON document. The attributes in the expression must be separated by commas.</p>
    /// <p>If no attribute names are specified, then all attributes will be returned. If any of the requested attributes are not found, they will not appear in the result.</p>
    /// <p>For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Accessing Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn projection_expression(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.projection_expression(input.into());
        self
    }
    /// <p>A string that identifies one or more attributes to retrieve from the table. These attributes can include scalars, sets, or elements of a JSON document. The attributes in the expression must be separated by commas.</p>
    /// <p>If no attribute names are specified, then all attributes will be returned. If any of the requested attributes are not found, they will not appear in the result.</p>
    /// <p>For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Accessing Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn set_projection_expression(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_projection_expression(input);
        self
    }
    /// <p>A string that identifies one or more attributes to retrieve from the table. These attributes can include scalars, sets, or elements of a JSON document. The attributes in the expression must be separated by commas.</p>
    /// <p>If no attribute names are specified, then all attributes will be returned. If any of the requested attributes are not found, they will not appear in the result.</p>
    /// <p>For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Accessing Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn get_projection_expression(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_projection_expression()
    }
    /// <p>A string that contains conditions that DynamoDB applies after the <code>Query</code> operation, but before the data is returned to you. Items that do not satisfy the <code>FilterExpression</code> criteria are not returned.</p>
    /// <p>A <code>FilterExpression</code> does not allow key attributes. You cannot define a filter expression based on a partition key or a sort key.</p><note>
    /// <p>A <code>FilterExpression</code> is applied after the items have already been read; the process of filtering does not consume any additional read capacity units.</p>
    /// </note>
    /// <p>For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Query.FilterExpression.html">Filter Expressions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn filter_expression(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.filter_expression(input.into());
        self
    }
    /// <p>A string that contains conditions that DynamoDB applies after the <code>Query</code> operation, but before the data is returned to you. Items that do not satisfy the <code>FilterExpression</code> criteria are not returned.</p>
    /// <p>A <code>FilterExpression</code> does not allow key attributes. You cannot define a filter expression based on a partition key or a sort key.</p><note>
    /// <p>A <code>FilterExpression</code> is applied after the items have already been read; the process of filtering does not consume any additional read capacity units.</p>
    /// </note>
    /// <p>For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Query.FilterExpression.html">Filter Expressions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn set_filter_expression(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_filter_expression(input);
        self
    }
    /// <p>A string that contains conditions that DynamoDB applies after the <code>Query</code> operation, but before the data is returned to you. Items that do not satisfy the <code>FilterExpression</code> criteria are not returned.</p>
    /// <p>A <code>FilterExpression</code> does not allow key attributes. You cannot define a filter expression based on a partition key or a sort key.</p><note>
    /// <p>A <code>FilterExpression</code> is applied after the items have already been read; the process of filtering does not consume any additional read capacity units.</p>
    /// </note>
    /// <p>For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Query.FilterExpression.html">Filter Expressions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn get_filter_expression(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_filter_expression()
    }
    /// <p>The condition that specifies the key values for items to be retrieved by the <code>Query</code> action.</p>
    /// <p>The condition must perform an equality test on a single partition key value.</p>
    /// <p>The condition can optionally perform one of several comparison tests on a single sort key value. This allows <code>Query</code> to retrieve one item with a given partition key value and sort key value, or several items that have the same partition key value but different sort key values.</p>
    /// <p>The partition key equality test is required, and must be specified in the following format:</p>
    /// <p><code>partitionKeyName</code> <i>=</i> <code>:partitionkeyval</code></p>
    /// <p>If you also want to provide a condition for the sort key, it must be combined using <code>AND</code> with the condition for the sort key. Following is an example, using the <b>=</b> comparison operator for the sort key:</p>
    /// <p><code>partitionKeyName</code> <code>=</code> <code>:partitionkeyval</code> <code>AND</code> <code>sortKeyName</code> <code>=</code> <code>:sortkeyval</code></p>
    /// <p>Valid comparisons for the sort key condition are as follows:</p>
    /// <ul>
    /// <li>
    /// <p><code>sortKeyName</code> <code>=</code> <code>:sortkeyval</code> - true if the sort key value is equal to <code>:sortkeyval</code>.</p></li>
    /// <li>
    /// <p><code>sortKeyName</code> <code>&lt;</code> <code>:sortkeyval</code> - true if the sort key value is less than <code>:sortkeyval</code>.</p></li>
    /// <li>
    /// <p><code>sortKeyName</code> <code>&lt;=</code> <code>:sortkeyval</code> - true if the sort key value is less than or equal to <code>:sortkeyval</code>.</p></li>
    /// <li>
    /// <p><code>sortKeyName</code> <code>&gt;</code> <code>:sortkeyval</code> - true if the sort key value is greater than <code>:sortkeyval</code>.</p></li>
    /// <li>
    /// <p><code>sortKeyName</code> <code>&gt;= </code> <code>:sortkeyval</code> - true if the sort key value is greater than or equal to <code>:sortkeyval</code>.</p></li>
    /// <li>
    /// <p><code>sortKeyName</code> <code>BETWEEN</code> <code>:sortkeyval1</code> <code>AND</code> <code>:sortkeyval2</code> - true if the sort key value is greater than or equal to <code>:sortkeyval1</code>, and less than or equal to <code>:sortkeyval2</code>.</p></li>
    /// <li>
    /// <p><code>begins_with (</code> <code>sortKeyName</code>, <code>:sortkeyval</code> <code>)</code> - true if the sort key value begins with a particular operand. (You cannot use this function with a sort key that is of type Number.) Note that the function name <code>begins_with</code> is case-sensitive.</p></li>
    /// </ul>
    /// <p>Use the <code>ExpressionAttributeValues</code> parameter to replace tokens such as <code>:partitionval</code> and <code>:sortval</code> with actual values at runtime.</p>
    /// <p>You can optionally use the <code>ExpressionAttributeNames</code> parameter to replace the names of the partition key and sort key with placeholder tokens. This option might be necessary if an attribute name conflicts with a DynamoDB reserved word. For example, the following <code>KeyConditionExpression</code> parameter causes an error because <i>Size</i> is a reserved word:</p>
    /// <ul>
    /// <li>
    /// <p><code>Size = :myval</code></p></li>
    /// </ul>
    /// <p>To work around this, define a placeholder (such a <code>#S</code>) to represent the attribute name <i>Size</i>. <code>KeyConditionExpression</code> then is as follows:</p>
    /// <ul>
    /// <li>
    /// <p><code>#S = :myval</code></p></li>
    /// </ul>
    /// <p>For a list of reserved words, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html">Reserved Words</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    /// <p>For more information on <code>ExpressionAttributeNames</code> and <code>ExpressionAttributeValues</code>, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ExpressionPlaceholders.html">Using Placeholders for Attribute Names and Values</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn key_condition_expression(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.key_condition_expression(input.into());
        self
    }
    /// <p>The condition that specifies the key values for items to be retrieved by the <code>Query</code> action.</p>
    /// <p>The condition must perform an equality test on a single partition key value.</p>
    /// <p>The condition can optionally perform one of several comparison tests on a single sort key value. This allows <code>Query</code> to retrieve one item with a given partition key value and sort key value, or several items that have the same partition key value but different sort key values.</p>
    /// <p>The partition key equality test is required, and must be specified in the following format:</p>
    /// <p><code>partitionKeyName</code> <i>=</i> <code>:partitionkeyval</code></p>
    /// <p>If you also want to provide a condition for the sort key, it must be combined using <code>AND</code> with the condition for the sort key. Following is an example, using the <b>=</b> comparison operator for the sort key:</p>
    /// <p><code>partitionKeyName</code> <code>=</code> <code>:partitionkeyval</code> <code>AND</code> <code>sortKeyName</code> <code>=</code> <code>:sortkeyval</code></p>
    /// <p>Valid comparisons for the sort key condition are as follows:</p>
    /// <ul>
    /// <li>
    /// <p><code>sortKeyName</code> <code>=</code> <code>:sortkeyval</code> - true if the sort key value is equal to <code>:sortkeyval</code>.</p></li>
    /// <li>
    /// <p><code>sortKeyName</code> <code>&lt;</code> <code>:sortkeyval</code> - true if the sort key value is less than <code>:sortkeyval</code>.</p></li>
    /// <li>
    /// <p><code>sortKeyName</code> <code>&lt;=</code> <code>:sortkeyval</code> - true if the sort key value is less than or equal to <code>:sortkeyval</code>.</p></li>
    /// <li>
    /// <p><code>sortKeyName</code> <code>&gt;</code> <code>:sortkeyval</code> - true if the sort key value is greater than <code>:sortkeyval</code>.</p></li>
    /// <li>
    /// <p><code>sortKeyName</code> <code>&gt;= </code> <code>:sortkeyval</code> - true if the sort key value is greater than or equal to <code>:sortkeyval</code>.</p></li>
    /// <li>
    /// <p><code>sortKeyName</code> <code>BETWEEN</code> <code>:sortkeyval1</code> <code>AND</code> <code>:sortkeyval2</code> - true if the sort key value is greater than or equal to <code>:sortkeyval1</code>, and less than or equal to <code>:sortkeyval2</code>.</p></li>
    /// <li>
    /// <p><code>begins_with (</code> <code>sortKeyName</code>, <code>:sortkeyval</code> <code>)</code> - true if the sort key value begins with a particular operand. (You cannot use this function with a sort key that is of type Number.) Note that the function name <code>begins_with</code> is case-sensitive.</p></li>
    /// </ul>
    /// <p>Use the <code>ExpressionAttributeValues</code> parameter to replace tokens such as <code>:partitionval</code> and <code>:sortval</code> with actual values at runtime.</p>
    /// <p>You can optionally use the <code>ExpressionAttributeNames</code> parameter to replace the names of the partition key and sort key with placeholder tokens. This option might be necessary if an attribute name conflicts with a DynamoDB reserved word. For example, the following <code>KeyConditionExpression</code> parameter causes an error because <i>Size</i> is a reserved word:</p>
    /// <ul>
    /// <li>
    /// <p><code>Size = :myval</code></p></li>
    /// </ul>
    /// <p>To work around this, define a placeholder (such a <code>#S</code>) to represent the attribute name <i>Size</i>. <code>KeyConditionExpression</code> then is as follows:</p>
    /// <ul>
    /// <li>
    /// <p><code>#S = :myval</code></p></li>
    /// </ul>
    /// <p>For a list of reserved words, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html">Reserved Words</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    /// <p>For more information on <code>ExpressionAttributeNames</code> and <code>ExpressionAttributeValues</code>, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ExpressionPlaceholders.html">Using Placeholders for Attribute Names and Values</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn set_key_condition_expression(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_key_condition_expression(input);
        self
    }
    /// <p>The condition that specifies the key values for items to be retrieved by the <code>Query</code> action.</p>
    /// <p>The condition must perform an equality test on a single partition key value.</p>
    /// <p>The condition can optionally perform one of several comparison tests on a single sort key value. This allows <code>Query</code> to retrieve one item with a given partition key value and sort key value, or several items that have the same partition key value but different sort key values.</p>
    /// <p>The partition key equality test is required, and must be specified in the following format:</p>
    /// <p><code>partitionKeyName</code> <i>=</i> <code>:partitionkeyval</code></p>
    /// <p>If you also want to provide a condition for the sort key, it must be combined using <code>AND</code> with the condition for the sort key. Following is an example, using the <b>=</b> comparison operator for the sort key:</p>
    /// <p><code>partitionKeyName</code> <code>=</code> <code>:partitionkeyval</code> <code>AND</code> <code>sortKeyName</code> <code>=</code> <code>:sortkeyval</code></p>
    /// <p>Valid comparisons for the sort key condition are as follows:</p>
    /// <ul>
    /// <li>
    /// <p><code>sortKeyName</code> <code>=</code> <code>:sortkeyval</code> - true if the sort key value is equal to <code>:sortkeyval</code>.</p></li>
    /// <li>
    /// <p><code>sortKeyName</code> <code>&lt;</code> <code>:sortkeyval</code> - true if the sort key value is less than <code>:sortkeyval</code>.</p></li>
    /// <li>
    /// <p><code>sortKeyName</code> <code>&lt;=</code> <code>:sortkeyval</code> - true if the sort key value is less than or equal to <code>:sortkeyval</code>.</p></li>
    /// <li>
    /// <p><code>sortKeyName</code> <code>&gt;</code> <code>:sortkeyval</code> - true if the sort key value is greater than <code>:sortkeyval</code>.</p></li>
    /// <li>
    /// <p><code>sortKeyName</code> <code>&gt;= </code> <code>:sortkeyval</code> - true if the sort key value is greater than or equal to <code>:sortkeyval</code>.</p></li>
    /// <li>
    /// <p><code>sortKeyName</code> <code>BETWEEN</code> <code>:sortkeyval1</code> <code>AND</code> <code>:sortkeyval2</code> - true if the sort key value is greater than or equal to <code>:sortkeyval1</code>, and less than or equal to <code>:sortkeyval2</code>.</p></li>
    /// <li>
    /// <p><code>begins_with (</code> <code>sortKeyName</code>, <code>:sortkeyval</code> <code>)</code> - true if the sort key value begins with a particular operand. (You cannot use this function with a sort key that is of type Number.) Note that the function name <code>begins_with</code> is case-sensitive.</p></li>
    /// </ul>
    /// <p>Use the <code>ExpressionAttributeValues</code> parameter to replace tokens such as <code>:partitionval</code> and <code>:sortval</code> with actual values at runtime.</p>
    /// <p>You can optionally use the <code>ExpressionAttributeNames</code> parameter to replace the names of the partition key and sort key with placeholder tokens. This option might be necessary if an attribute name conflicts with a DynamoDB reserved word. For example, the following <code>KeyConditionExpression</code> parameter causes an error because <i>Size</i> is a reserved word:</p>
    /// <ul>
    /// <li>
    /// <p><code>Size = :myval</code></p></li>
    /// </ul>
    /// <p>To work around this, define a placeholder (such a <code>#S</code>) to represent the attribute name <i>Size</i>. <code>KeyConditionExpression</code> then is as follows:</p>
    /// <ul>
    /// <li>
    /// <p><code>#S = :myval</code></p></li>
    /// </ul>
    /// <p>For a list of reserved words, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html">Reserved Words</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    /// <p>For more information on <code>ExpressionAttributeNames</code> and <code>ExpressionAttributeValues</code>, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ExpressionPlaceholders.html">Using Placeholders for Attribute Names and Values</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn get_key_condition_expression(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_key_condition_expression()
    }
    ///
    /// Adds a key-value pair to `ExpressionAttributeNames`.
    ///
    /// To override the contents of this collection use [`set_expression_attribute_names`](Self::set_expression_attribute_names).
    ///
    /// <p>One or more substitution tokens for attribute names in an expression. The following are some use cases for using <code>ExpressionAttributeNames</code>:</p>
    /// <ul>
    /// <li>
    /// <p>To access an attribute whose name conflicts with a DynamoDB reserved word.</p></li>
    /// <li>
    /// <p>To create a placeholder for repeating occurrences of an attribute name in an expression.</p></li>
    /// <li>
    /// <p>To prevent special characters in an attribute name from being misinterpreted in an expression.</p></li>
    /// </ul>
    /// <p>Use the <b>#</b> character in an expression to dereference an attribute name. For example, consider the following attribute name:</p>
    /// <ul>
    /// <li>
    /// <p><code>Percentile</code></p></li>
    /// </ul>
    /// <p>The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html">Reserved Words</a> in the <i>Amazon DynamoDB Developer Guide</i>). To work around this, you could specify the following for <code>ExpressionAttributeNames</code>:</p>
    /// <ul>
    /// <li>
    /// <p><code>{"#P":"Percentile"}</code></p></li>
    /// </ul>
    /// <p>You could then use this substitution in an expression, as in this example:</p>
    /// <ul>
    /// <li>
    /// <p><code>#P = :val</code></p></li>
    /// </ul><note>
    /// <p>Tokens that begin with the <b>:</b> character are <i>expression attribute values</i>, which are placeholders for the actual value at runtime.</p>
    /// </note>
    /// <p>For more information on expression attribute names, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Specifying Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn expression_attribute_names(
        mut self,
        k: impl ::std::convert::Into<::std::string::String>,
        v: impl ::std::convert::Into<::std::string::String>,
    ) -> Self {
        self.inner = self.inner.expression_attribute_names(k.into(), v.into());
        self
    }
    /// <p>One or more substitution tokens for attribute names in an expression. The following are some use cases for using <code>ExpressionAttributeNames</code>:</p>
    /// <ul>
    /// <li>
    /// <p>To access an attribute whose name conflicts with a DynamoDB reserved word.</p></li>
    /// <li>
    /// <p>To create a placeholder for repeating occurrences of an attribute name in an expression.</p></li>
    /// <li>
    /// <p>To prevent special characters in an attribute name from being misinterpreted in an expression.</p></li>
    /// </ul>
    /// <p>Use the <b>#</b> character in an expression to dereference an attribute name. For example, consider the following attribute name:</p>
    /// <ul>
    /// <li>
    /// <p><code>Percentile</code></p></li>
    /// </ul>
    /// <p>The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html">Reserved Words</a> in the <i>Amazon DynamoDB Developer Guide</i>). To work around this, you could specify the following for <code>ExpressionAttributeNames</code>:</p>
    /// <ul>
    /// <li>
    /// <p><code>{"#P":"Percentile"}</code></p></li>
    /// </ul>
    /// <p>You could then use this substitution in an expression, as in this example:</p>
    /// <ul>
    /// <li>
    /// <p><code>#P = :val</code></p></li>
    /// </ul><note>
    /// <p>Tokens that begin with the <b>:</b> character are <i>expression attribute values</i>, which are placeholders for the actual value at runtime.</p>
    /// </note>
    /// <p>For more information on expression attribute names, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Specifying Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn set_expression_attribute_names(
        mut self,
        input: ::std::option::Option<::std::collections::HashMap<::std::string::String, ::std::string::String>>,
    ) -> Self {
        self.inner = self.inner.set_expression_attribute_names(input);
        self
    }
    /// <p>One or more substitution tokens for attribute names in an expression. The following are some use cases for using <code>ExpressionAttributeNames</code>:</p>
    /// <ul>
    /// <li>
    /// <p>To access an attribute whose name conflicts with a DynamoDB reserved word.</p></li>
    /// <li>
    /// <p>To create a placeholder for repeating occurrences of an attribute name in an expression.</p></li>
    /// <li>
    /// <p>To prevent special characters in an attribute name from being misinterpreted in an expression.</p></li>
    /// </ul>
    /// <p>Use the <b>#</b> character in an expression to dereference an attribute name. For example, consider the following attribute name:</p>
    /// <ul>
    /// <li>
    /// <p><code>Percentile</code></p></li>
    /// </ul>
    /// <p>The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html">Reserved Words</a> in the <i>Amazon DynamoDB Developer Guide</i>). To work around this, you could specify the following for <code>ExpressionAttributeNames</code>:</p>
    /// <ul>
    /// <li>
    /// <p><code>{"#P":"Percentile"}</code></p></li>
    /// </ul>
    /// <p>You could then use this substitution in an expression, as in this example:</p>
    /// <ul>
    /// <li>
    /// <p><code>#P = :val</code></p></li>
    /// </ul><note>
    /// <p>Tokens that begin with the <b>:</b> character are <i>expression attribute values</i>, which are placeholders for the actual value at runtime.</p>
    /// </note>
    /// <p>For more information on expression attribute names, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Specifying Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn get_expression_attribute_names(
        &self,
    ) -> &::std::option::Option<::std::collections::HashMap<::std::string::String, ::std::string::String>> {
        self.inner.get_expression_attribute_names()
    }
    ///
    /// Adds a key-value pair to `ExpressionAttributeValues`.
    ///
    /// To override the contents of this collection use [`set_expression_attribute_values`](Self::set_expression_attribute_values).
    ///
    /// <p>One or more values that can be substituted in an expression.</p>
    /// <p>Use the <b>:</b> (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the <i>ProductStatus</i> attribute was one of the following:</p>
    /// <p><code>Available | Backordered | Discontinued</code></p>
    /// <p>You would first need to specify <code>ExpressionAttributeValues</code> as follows:</p>
    /// <p><code>{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }</code></p>
    /// <p>You could then use these values in an expression, such as this:</p>
    /// <p><code>ProductStatus IN (:avail, :back, :disc)</code></p>
    /// <p>For more information on expression attribute values, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html">Specifying Conditions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn expression_attribute_values(mut self, k: impl ::std::convert::Into<::std::string::String>, v: crate::types::AttributeValue) -> Self {
        self.inner = self.inner.expression_attribute_values(k.into(), v);
        self
    }
    /// <p>One or more values that can be substituted in an expression.</p>
    /// <p>Use the <b>:</b> (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the <i>ProductStatus</i> attribute was one of the following:</p>
    /// <p><code>Available | Backordered | Discontinued</code></p>
    /// <p>You would first need to specify <code>ExpressionAttributeValues</code> as follows:</p>
    /// <p><code>{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }</code></p>
    /// <p>You could then use these values in an expression, such as this:</p>
    /// <p><code>ProductStatus IN (:avail, :back, :disc)</code></p>
    /// <p>For more information on expression attribute values, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html">Specifying Conditions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn set_expression_attribute_values(
        mut self,
        input: ::std::option::Option<::std::collections::HashMap<::std::string::String, crate::types::AttributeValue>>,
    ) -> Self {
        self.inner = self.inner.set_expression_attribute_values(input);
        self
    }
    /// <p>One or more values that can be substituted in an expression.</p>
    /// <p>Use the <b>:</b> (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the <i>ProductStatus</i> attribute was one of the following:</p>
    /// <p><code>Available | Backordered | Discontinued</code></p>
    /// <p>You would first need to specify <code>ExpressionAttributeValues</code> as follows:</p>
    /// <p><code>{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }</code></p>
    /// <p>You could then use these values in an expression, such as this:</p>
    /// <p><code>ProductStatus IN (:avail, :back, :disc)</code></p>
    /// <p>For more information on expression attribute values, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html">Specifying Conditions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</p>
    pub fn get_expression_attribute_values(
        &self,
    ) -> &::std::option::Option<::std::collections::HashMap<::std::string::String, crate::types::AttributeValue>> {
        self.inner.get_expression_attribute_values()
    }
}