aws_sdk_dynamodb/operation/delete_resource_policy/builders.rs
1// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
2pub use crate::operation::delete_resource_policy::_delete_resource_policy_output::DeleteResourcePolicyOutputBuilder;
3
4pub use crate::operation::delete_resource_policy::_delete_resource_policy_input::DeleteResourcePolicyInputBuilder;
5
6impl crate::operation::delete_resource_policy::builders::DeleteResourcePolicyInputBuilder {
7 /// Sends a request with this input using the given client.
8 pub async fn send_with(self, client: &crate::Client) -> ::std::result::Result<
9 crate::operation::delete_resource_policy::DeleteResourcePolicyOutput,
10 ::aws_smithy_runtime_api::client::result::SdkError<
11 crate::operation::delete_resource_policy::DeleteResourcePolicyError,
12 ::aws_smithy_runtime_api::client::orchestrator::HttpResponse
13 >
14 > {
15 let mut fluent_builder = client.delete_resource_policy();
16 fluent_builder.inner = self;
17 fluent_builder.send().await
18 }
19 }
20/// Fluent builder constructing a request to `DeleteResourcePolicy`.
21///
22/// <p>Deletes the resource-based policy attached to the resource, which can be a table or stream.</p>
23/// <p><code>DeleteResourcePolicy</code> is an idempotent operation; running it multiple times on the same resource <i>doesn't</i> result in an error response, unless you specify an <code>ExpectedRevisionId</code>, which will then return a <code>PolicyNotFoundException</code>.</p><important>
24/// <p>To make sure that you don't inadvertently lock yourself out of your own resources, the root principal in your Amazon Web Services account can perform <code>DeleteResourcePolicy</code> requests, even if your resource-based policy explicitly denies the root principal's access.</p>
25/// </important> <note>
26/// <p><code>DeleteResourcePolicy</code> is an asynchronous operation. If you issue a <code>GetResourcePolicy</code> request immediately after running the <code>DeleteResourcePolicy</code> request, DynamoDB might still return the deleted policy. This is because the policy for your resource might not have been deleted yet. Wait for a few seconds, and then try the <code>GetResourcePolicy</code> request again.</p>
27/// </note>
28#[derive(::std::clone::Clone, ::std::fmt::Debug)]
29pub struct DeleteResourcePolicyFluentBuilder {
30 handle: ::std::sync::Arc<crate::client::Handle>,
31 inner: crate::operation::delete_resource_policy::builders::DeleteResourcePolicyInputBuilder,
32config_override: ::std::option::Option<crate::config::Builder>,
33 }
34impl
35 crate::client::customize::internal::CustomizableSend<
36 crate::operation::delete_resource_policy::DeleteResourcePolicyOutput,
37 crate::operation::delete_resource_policy::DeleteResourcePolicyError,
38 > for DeleteResourcePolicyFluentBuilder
39 {
40 fn send(
41 self,
42 config_override: crate::config::Builder,
43 ) -> crate::client::customize::internal::BoxFuture<
44 crate::client::customize::internal::SendResult<
45 crate::operation::delete_resource_policy::DeleteResourcePolicyOutput,
46 crate::operation::delete_resource_policy::DeleteResourcePolicyError,
47 >,
48 > {
49 ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
50 }
51 }
52impl DeleteResourcePolicyFluentBuilder {
53 /// Creates a new `DeleteResourcePolicyFluentBuilder`.
54 pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
55 Self {
56 handle,
57 inner: ::std::default::Default::default(),
58 config_override: ::std::option::Option::None,
59 }
60 }
61 /// Access the DeleteResourcePolicy as a reference.
62 pub fn as_input(&self) -> &crate::operation::delete_resource_policy::builders::DeleteResourcePolicyInputBuilder {
63 &self.inner
64 }
65 /// Sends the request and returns the response.
66 ///
67 /// If an error occurs, an `SdkError` will be returned with additional details that
68 /// can be matched against.
69 ///
70 /// By default, any retryable failures will be retried twice. Retry behavior
71 /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
72 /// set when configuring the client. Note: retries are enabled by default when using
73 /// `aws_config::load_from_env()` or when using `BehaviorVersion::v2025_01_17()` or later.
74 pub async fn send(self) -> ::std::result::Result<crate::operation::delete_resource_policy::DeleteResourcePolicyOutput, ::aws_smithy_runtime_api::client::result::SdkError<crate::operation::delete_resource_policy::DeleteResourcePolicyError, ::aws_smithy_runtime_api::client::orchestrator::HttpResponse>> {
75 let input = self.inner.build().map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
76 let runtime_plugins = crate::operation::delete_resource_policy::DeleteResourcePolicy::operation_runtime_plugins(
77 self.handle.runtime_plugins.clone(),
78 &self.handle.conf,
79 self.config_override,
80 );
81 crate::operation::delete_resource_policy::DeleteResourcePolicy::orchestrate(&runtime_plugins, input).await
82 }
83
84 /// Consumes this builder, creating a customizable operation that can be modified before being sent.
85 pub fn customize(
86 self,
87 ) -> crate::client::customize::CustomizableOperation<crate::operation::delete_resource_policy::DeleteResourcePolicyOutput, crate::operation::delete_resource_policy::DeleteResourcePolicyError, Self> {
88 crate::client::customize::CustomizableOperation::new(self)
89 }
90 pub(crate) fn config_override(
91 mut self,
92 config_override: impl ::std::convert::Into<crate::config::Builder>,
93 ) -> Self {
94 self.set_config_override(::std::option::Option::Some(config_override.into()));
95 self
96 }
97
98 pub(crate) fn set_config_override(
99 &mut self,
100 config_override: ::std::option::Option<crate::config::Builder>,
101 ) -> &mut Self {
102 self.config_override = config_override;
103 self
104 }
105 /// <p>The Amazon Resource Name (ARN) of the DynamoDB resource from which the policy will be removed. The resources you can specify include tables and streams. If you remove the policy of a table, it will also remove the permissions for the table's indexes defined in that policy document. This is because index permissions are defined in the table's policy.</p>
106 pub fn resource_arn(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
107 self.inner = self.inner.resource_arn(input.into());
108 self
109 }
110 /// <p>The Amazon Resource Name (ARN) of the DynamoDB resource from which the policy will be removed. The resources you can specify include tables and streams. If you remove the policy of a table, it will also remove the permissions for the table's indexes defined in that policy document. This is because index permissions are defined in the table's policy.</p>
111 pub fn set_resource_arn(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
112 self.inner = self.inner.set_resource_arn(input);
113 self
114 }
115 /// <p>The Amazon Resource Name (ARN) of the DynamoDB resource from which the policy will be removed. The resources you can specify include tables and streams. If you remove the policy of a table, it will also remove the permissions for the table's indexes defined in that policy document. This is because index permissions are defined in the table's policy.</p>
116 pub fn get_resource_arn(&self) -> &::std::option::Option<::std::string::String> {
117 self.inner.get_resource_arn()
118 }
119 /// <p>A string value that you can use to conditionally delete your policy. When you provide an expected revision ID, if the revision ID of the existing policy on the resource doesn't match or if there's no policy attached to the resource, the request will fail and return a <code>PolicyNotFoundException</code>.</p>
120 pub fn expected_revision_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
121 self.inner = self.inner.expected_revision_id(input.into());
122 self
123 }
124 /// <p>A string value that you can use to conditionally delete your policy. When you provide an expected revision ID, if the revision ID of the existing policy on the resource doesn't match or if there's no policy attached to the resource, the request will fail and return a <code>PolicyNotFoundException</code>.</p>
125 pub fn set_expected_revision_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
126 self.inner = self.inner.set_expected_revision_id(input);
127 self
128 }
129 /// <p>A string value that you can use to conditionally delete your policy. When you provide an expected revision ID, if the revision ID of the existing policy on the resource doesn't match or if there's no policy attached to the resource, the request will fail and return a <code>PolicyNotFoundException</code>.</p>
130 pub fn get_expected_revision_id(&self) -> &::std::option::Option<::std::string::String> {
131 self.inner.get_expected_revision_id()
132 }
133}
134