AWS SDK

AWS SDK

rev. d06a46cae0f385cdae37a9f8264db3469a090ab5 (ignoring whitespace)

Files changed:

tmp-codegen-diff/aws-sdk/sdk/kms/src/operation/tag_resource.rs

@@ -162,162 +240,240 @@
  182    182   
                _input: &crate::operation::tag_resource::TagResourceInput,
  183    183   
                output: &mut ::std::string::String,
  184    184   
            ) -> ::std::result::Result<(), ::aws_smithy_types::error::operation::BuildError> {
  185    185   
                use ::std::fmt::Write as _;
  186    186   
                ::std::write!(output, "/").expect("formatting should succeed");
  187    187   
                ::std::result::Result::Ok(())
  188    188   
            }
  189    189   
            #[allow(clippy::unnecessary_wraps)]
  190    190   
            fn update_http_builder(
  191    191   
                input: &crate::operation::tag_resource::TagResourceInput,
  192         -
                builder: ::http::request::Builder,
  193         -
            ) -> ::std::result::Result<::http::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
         192  +
                builder: ::http_1x::request::Builder,
         193  +
            ) -> ::std::result::Result<::http_1x::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
  194    194   
                let mut uri = ::std::string::String::new();
  195    195   
                uri_base(input, &mut uri)?;
  196    196   
                ::std::result::Result::Ok(builder.method("POST").uri(uri))
  197    197   
            }
  198         -
            let mut builder = update_http_builder(&input, ::http::request::Builder::new())?;
  199         -
            builder = _header_serialization_settings.set_default_header(builder, ::http::header::CONTENT_TYPE, "application/x-amz-json-1.1");
         198  +
            let mut builder = update_http_builder(&input, ::http_1x::request::Builder::new())?;
         199  +
            builder = _header_serialization_settings.set_default_header(builder, ::http_1x::header::CONTENT_TYPE, "application/x-amz-json-1.1");
  200    200   
            builder = _header_serialization_settings.set_default_header(
  201    201   
                builder,
  202         -
                ::http::header::HeaderName::from_static("x-amz-target"),
         202  +
                ::http_1x::header::HeaderName::from_static("x-amz-target"),
  203    203   
                "TrentService.TagResource",
  204    204   
            );
  205    205   
            builder
  206    206   
        };
  207    207   
        let body = ::aws_smithy_types::body::SdkBody::from(crate::protocol_serde::shape_tag_resource::ser_tag_resource_input(&input)?);
  208    208   
        if let Some(content_length) = body.content_length() {
  209    209   
            let content_length = content_length.to_string();
  210         -
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http::header::CONTENT_LENGTH, &content_length);
         210  +
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http_1x::header::CONTENT_LENGTH, &content_length);
  211    211   
        }
  212    212   
        ::std::result::Result::Ok(request_builder.body(body).expect("valid request").try_into().unwrap())
  213    213   
    }
  214    214   
}
  215    215   
#[derive(Debug)]
  216    216   
struct TagResourceEndpointParamsInterceptor;
  217    217   
  218    218   
impl ::aws_smithy_runtime_api::client::interceptors::Intercept for TagResourceEndpointParamsInterceptor {
  219    219   
    fn name(&self) -> &'static str {
  220    220   
        "TagResourceEndpointParamsInterceptor"

tmp-codegen-diff/aws-sdk/sdk/kms/src/operation/untag_resource.rs

@@ -162,162 +240,240 @@
  182    182   
                _input: &crate::operation::untag_resource::UntagResourceInput,
  183    183   
                output: &mut ::std::string::String,
  184    184   
            ) -> ::std::result::Result<(), ::aws_smithy_types::error::operation::BuildError> {
  185    185   
                use ::std::fmt::Write as _;
  186    186   
                ::std::write!(output, "/").expect("formatting should succeed");
  187    187   
                ::std::result::Result::Ok(())
  188    188   
            }
  189    189   
            #[allow(clippy::unnecessary_wraps)]
  190    190   
            fn update_http_builder(
  191    191   
                input: &crate::operation::untag_resource::UntagResourceInput,
  192         -
                builder: ::http::request::Builder,
  193         -
            ) -> ::std::result::Result<::http::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
         192  +
                builder: ::http_1x::request::Builder,
         193  +
            ) -> ::std::result::Result<::http_1x::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
  194    194   
                let mut uri = ::std::string::String::new();
  195    195   
                uri_base(input, &mut uri)?;
  196    196   
                ::std::result::Result::Ok(builder.method("POST").uri(uri))
  197    197   
            }
  198         -
            let mut builder = update_http_builder(&input, ::http::request::Builder::new())?;
  199         -
            builder = _header_serialization_settings.set_default_header(builder, ::http::header::CONTENT_TYPE, "application/x-amz-json-1.1");
         198  +
            let mut builder = update_http_builder(&input, ::http_1x::request::Builder::new())?;
         199  +
            builder = _header_serialization_settings.set_default_header(builder, ::http_1x::header::CONTENT_TYPE, "application/x-amz-json-1.1");
  200    200   
            builder = _header_serialization_settings.set_default_header(
  201    201   
                builder,
  202         -
                ::http::header::HeaderName::from_static("x-amz-target"),
         202  +
                ::http_1x::header::HeaderName::from_static("x-amz-target"),
  203    203   
                "TrentService.UntagResource",
  204    204   
            );
  205    205   
            builder
  206    206   
        };
  207    207   
        let body = ::aws_smithy_types::body::SdkBody::from(crate::protocol_serde::shape_untag_resource::ser_untag_resource_input(&input)?);
  208    208   
        if let Some(content_length) = body.content_length() {
  209    209   
            let content_length = content_length.to_string();
  210         -
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http::header::CONTENT_LENGTH, &content_length);
         210  +
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http_1x::header::CONTENT_LENGTH, &content_length);
  211    211   
        }
  212    212   
        ::std::result::Result::Ok(request_builder.body(body).expect("valid request").try_into().unwrap())
  213    213   
    }
  214    214   
}
  215    215   
#[derive(Debug)]
  216    216   
struct UntagResourceEndpointParamsInterceptor;
  217    217   
  218    218   
impl ::aws_smithy_runtime_api::client::interceptors::Intercept for UntagResourceEndpointParamsInterceptor {
  219    219   
    fn name(&self) -> &'static str {
  220    220   
        "UntagResourceEndpointParamsInterceptor"

tmp-codegen-diff/aws-sdk/sdk/kms/src/operation/update_alias.rs

@@ -162,162 +240,240 @@
  182    182   
                _input: &crate::operation::update_alias::UpdateAliasInput,
  183    183   
                output: &mut ::std::string::String,
  184    184   
            ) -> ::std::result::Result<(), ::aws_smithy_types::error::operation::BuildError> {
  185    185   
                use ::std::fmt::Write as _;
  186    186   
                ::std::write!(output, "/").expect("formatting should succeed");
  187    187   
                ::std::result::Result::Ok(())
  188    188   
            }
  189    189   
            #[allow(clippy::unnecessary_wraps)]
  190    190   
            fn update_http_builder(
  191    191   
                input: &crate::operation::update_alias::UpdateAliasInput,
  192         -
                builder: ::http::request::Builder,
  193         -
            ) -> ::std::result::Result<::http::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
         192  +
                builder: ::http_1x::request::Builder,
         193  +
            ) -> ::std::result::Result<::http_1x::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
  194    194   
                let mut uri = ::std::string::String::new();
  195    195   
                uri_base(input, &mut uri)?;
  196    196   
                ::std::result::Result::Ok(builder.method("POST").uri(uri))
  197    197   
            }
  198         -
            let mut builder = update_http_builder(&input, ::http::request::Builder::new())?;
  199         -
            builder = _header_serialization_settings.set_default_header(builder, ::http::header::CONTENT_TYPE, "application/x-amz-json-1.1");
         198  +
            let mut builder = update_http_builder(&input, ::http_1x::request::Builder::new())?;
         199  +
            builder = _header_serialization_settings.set_default_header(builder, ::http_1x::header::CONTENT_TYPE, "application/x-amz-json-1.1");
  200    200   
            builder = _header_serialization_settings.set_default_header(
  201    201   
                builder,
  202         -
                ::http::header::HeaderName::from_static("x-amz-target"),
         202  +
                ::http_1x::header::HeaderName::from_static("x-amz-target"),
  203    203   
                "TrentService.UpdateAlias",
  204    204   
            );
  205    205   
            builder
  206    206   
        };
  207    207   
        let body = ::aws_smithy_types::body::SdkBody::from(crate::protocol_serde::shape_update_alias::ser_update_alias_input(&input)?);
  208    208   
        if let Some(content_length) = body.content_length() {
  209    209   
            let content_length = content_length.to_string();
  210         -
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http::header::CONTENT_LENGTH, &content_length);
         210  +
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http_1x::header::CONTENT_LENGTH, &content_length);
  211    211   
        }
  212    212   
        ::std::result::Result::Ok(request_builder.body(body).expect("valid request").try_into().unwrap())
  213    213   
    }
  214    214   
}
  215    215   
#[derive(Debug)]
  216    216   
struct UpdateAliasEndpointParamsInterceptor;
  217    217   
  218    218   
impl ::aws_smithy_runtime_api::client::interceptors::Intercept for UpdateAliasEndpointParamsInterceptor {
  219    219   
    fn name(&self) -> &'static str {
  220    220   
        "UpdateAliasEndpointParamsInterceptor"

tmp-codegen-diff/aws-sdk/sdk/kms/src/operation/update_custom_key_store.rs

@@ -165,165 +245,245 @@
  185    185   
                _input: &crate::operation::update_custom_key_store::UpdateCustomKeyStoreInput,
  186    186   
                output: &mut ::std::string::String,
  187    187   
            ) -> ::std::result::Result<(), ::aws_smithy_types::error::operation::BuildError> {
  188    188   
                use ::std::fmt::Write as _;
  189    189   
                ::std::write!(output, "/").expect("formatting should succeed");
  190    190   
                ::std::result::Result::Ok(())
  191    191   
            }
  192    192   
            #[allow(clippy::unnecessary_wraps)]
  193    193   
            fn update_http_builder(
  194    194   
                input: &crate::operation::update_custom_key_store::UpdateCustomKeyStoreInput,
  195         -
                builder: ::http::request::Builder,
  196         -
            ) -> ::std::result::Result<::http::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
         195  +
                builder: ::http_1x::request::Builder,
         196  +
            ) -> ::std::result::Result<::http_1x::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
  197    197   
                let mut uri = ::std::string::String::new();
  198    198   
                uri_base(input, &mut uri)?;
  199    199   
                ::std::result::Result::Ok(builder.method("POST").uri(uri))
  200    200   
            }
  201         -
            let mut builder = update_http_builder(&input, ::http::request::Builder::new())?;
  202         -
            builder = _header_serialization_settings.set_default_header(builder, ::http::header::CONTENT_TYPE, "application/x-amz-json-1.1");
         201  +
            let mut builder = update_http_builder(&input, ::http_1x::request::Builder::new())?;
         202  +
            builder = _header_serialization_settings.set_default_header(builder, ::http_1x::header::CONTENT_TYPE, "application/x-amz-json-1.1");
  203    203   
            builder = _header_serialization_settings.set_default_header(
  204    204   
                builder,
  205         -
                ::http::header::HeaderName::from_static("x-amz-target"),
         205  +
                ::http_1x::header::HeaderName::from_static("x-amz-target"),
  206    206   
                "TrentService.UpdateCustomKeyStore",
  207    207   
            );
  208    208   
            builder
  209    209   
        };
  210    210   
        let body = ::aws_smithy_types::body::SdkBody::from(crate::protocol_serde::shape_update_custom_key_store::ser_update_custom_key_store_input(
  211    211   
            &input,
  212    212   
        )?);
  213    213   
        if let Some(content_length) = body.content_length() {
  214    214   
            let content_length = content_length.to_string();
  215         -
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http::header::CONTENT_LENGTH, &content_length);
         215  +
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http_1x::header::CONTENT_LENGTH, &content_length);
  216    216   
        }
  217    217   
        ::std::result::Result::Ok(request_builder.body(body).expect("valid request").try_into().unwrap())
  218    218   
    }
  219    219   
}
  220    220   
#[derive(Debug)]
  221    221   
struct UpdateCustomKeyStoreEndpointParamsInterceptor;
  222    222   
  223    223   
impl ::aws_smithy_runtime_api::client::interceptors::Intercept for UpdateCustomKeyStoreEndpointParamsInterceptor {
  224    224   
    fn name(&self) -> &'static str {
  225    225   
        "UpdateCustomKeyStoreEndpointParamsInterceptor"

tmp-codegen-diff/aws-sdk/sdk/kms/src/operation/update_key_description.rs

@@ -165,165 +245,245 @@
  185    185   
                _input: &crate::operation::update_key_description::UpdateKeyDescriptionInput,
  186    186   
                output: &mut ::std::string::String,
  187    187   
            ) -> ::std::result::Result<(), ::aws_smithy_types::error::operation::BuildError> {
  188    188   
                use ::std::fmt::Write as _;
  189    189   
                ::std::write!(output, "/").expect("formatting should succeed");
  190    190   
                ::std::result::Result::Ok(())
  191    191   
            }
  192    192   
            #[allow(clippy::unnecessary_wraps)]
  193    193   
            fn update_http_builder(
  194    194   
                input: &crate::operation::update_key_description::UpdateKeyDescriptionInput,
  195         -
                builder: ::http::request::Builder,
  196         -
            ) -> ::std::result::Result<::http::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
         195  +
                builder: ::http_1x::request::Builder,
         196  +
            ) -> ::std::result::Result<::http_1x::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
  197    197   
                let mut uri = ::std::string::String::new();
  198    198   
                uri_base(input, &mut uri)?;
  199    199   
                ::std::result::Result::Ok(builder.method("POST").uri(uri))
  200    200   
            }
  201         -
            let mut builder = update_http_builder(&input, ::http::request::Builder::new())?;
  202         -
            builder = _header_serialization_settings.set_default_header(builder, ::http::header::CONTENT_TYPE, "application/x-amz-json-1.1");
         201  +
            let mut builder = update_http_builder(&input, ::http_1x::request::Builder::new())?;
         202  +
            builder = _header_serialization_settings.set_default_header(builder, ::http_1x::header::CONTENT_TYPE, "application/x-amz-json-1.1");
  203    203   
            builder = _header_serialization_settings.set_default_header(
  204    204   
                builder,
  205         -
                ::http::header::HeaderName::from_static("x-amz-target"),
         205  +
                ::http_1x::header::HeaderName::from_static("x-amz-target"),
  206    206   
                "TrentService.UpdateKeyDescription",
  207    207   
            );
  208    208   
            builder
  209    209   
        };
  210    210   
        let body = ::aws_smithy_types::body::SdkBody::from(crate::protocol_serde::shape_update_key_description::ser_update_key_description_input(
  211    211   
            &input,
  212    212   
        )?);
  213    213   
        if let Some(content_length) = body.content_length() {
  214    214   
            let content_length = content_length.to_string();
  215         -
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http::header::CONTENT_LENGTH, &content_length);
         215  +
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http_1x::header::CONTENT_LENGTH, &content_length);
  216    216   
        }
  217    217   
        ::std::result::Result::Ok(request_builder.body(body).expect("valid request").try_into().unwrap())
  218    218   
    }
  219    219   
}
  220    220   
#[derive(Debug)]
  221    221   
struct UpdateKeyDescriptionEndpointParamsInterceptor;
  222    222   
  223    223   
impl ::aws_smithy_runtime_api::client::interceptors::Intercept for UpdateKeyDescriptionEndpointParamsInterceptor {
  224    224   
    fn name(&self) -> &'static str {
  225    225   
        "UpdateKeyDescriptionEndpointParamsInterceptor"

tmp-codegen-diff/aws-sdk/sdk/kms/src/operation/update_primary_region.rs

@@ -165,165 +245,245 @@
  185    185   
                _input: &crate::operation::update_primary_region::UpdatePrimaryRegionInput,
  186    186   
                output: &mut ::std::string::String,
  187    187   
            ) -> ::std::result::Result<(), ::aws_smithy_types::error::operation::BuildError> {
  188    188   
                use ::std::fmt::Write as _;
  189    189   
                ::std::write!(output, "/").expect("formatting should succeed");
  190    190   
                ::std::result::Result::Ok(())
  191    191   
            }
  192    192   
            #[allow(clippy::unnecessary_wraps)]
  193    193   
            fn update_http_builder(
  194    194   
                input: &crate::operation::update_primary_region::UpdatePrimaryRegionInput,
  195         -
                builder: ::http::request::Builder,
  196         -
            ) -> ::std::result::Result<::http::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
         195  +
                builder: ::http_1x::request::Builder,
         196  +
            ) -> ::std::result::Result<::http_1x::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
  197    197   
                let mut uri = ::std::string::String::new();
  198    198   
                uri_base(input, &mut uri)?;
  199    199   
                ::std::result::Result::Ok(builder.method("POST").uri(uri))
  200    200   
            }
  201         -
            let mut builder = update_http_builder(&input, ::http::request::Builder::new())?;
  202         -
            builder = _header_serialization_settings.set_default_header(builder, ::http::header::CONTENT_TYPE, "application/x-amz-json-1.1");
         201  +
            let mut builder = update_http_builder(&input, ::http_1x::request::Builder::new())?;
         202  +
            builder = _header_serialization_settings.set_default_header(builder, ::http_1x::header::CONTENT_TYPE, "application/x-amz-json-1.1");
  203    203   
            builder = _header_serialization_settings.set_default_header(
  204    204   
                builder,
  205         -
                ::http::header::HeaderName::from_static("x-amz-target"),
         205  +
                ::http_1x::header::HeaderName::from_static("x-amz-target"),
  206    206   
                "TrentService.UpdatePrimaryRegion",
  207    207   
            );
  208    208   
            builder
  209    209   
        };
  210    210   
        let body = ::aws_smithy_types::body::SdkBody::from(crate::protocol_serde::shape_update_primary_region::ser_update_primary_region_input(
  211    211   
            &input,
  212    212   
        )?);
  213    213   
        if let Some(content_length) = body.content_length() {
  214    214   
            let content_length = content_length.to_string();
  215         -
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http::header::CONTENT_LENGTH, &content_length);
         215  +
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http_1x::header::CONTENT_LENGTH, &content_length);
  216    216   
        }
  217    217   
        ::std::result::Result::Ok(request_builder.body(body).expect("valid request").try_into().unwrap())
  218    218   
    }
  219    219   
}
  220    220   
#[derive(Debug)]
  221    221   
struct UpdatePrimaryRegionEndpointParamsInterceptor;
  222    222   
  223    223   
impl ::aws_smithy_runtime_api::client::interceptors::Intercept for UpdatePrimaryRegionEndpointParamsInterceptor {
  224    224   
    fn name(&self) -> &'static str {
  225    225   
        "UpdatePrimaryRegionEndpointParamsInterceptor"

tmp-codegen-diff/aws-sdk/sdk/kms/src/operation/verify.rs

@@ -152,152 +230,230 @@
  172    172   
                _input: &crate::operation::verify::VerifyInput,
  173    173   
                output: &mut ::std::string::String,
  174    174   
            ) -> ::std::result::Result<(), ::aws_smithy_types::error::operation::BuildError> {
  175    175   
                use ::std::fmt::Write as _;
  176    176   
                ::std::write!(output, "/").expect("formatting should succeed");
  177    177   
                ::std::result::Result::Ok(())
  178    178   
            }
  179    179   
            #[allow(clippy::unnecessary_wraps)]
  180    180   
            fn update_http_builder(
  181    181   
                input: &crate::operation::verify::VerifyInput,
  182         -
                builder: ::http::request::Builder,
  183         -
            ) -> ::std::result::Result<::http::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
         182  +
                builder: ::http_1x::request::Builder,
         183  +
            ) -> ::std::result::Result<::http_1x::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
  184    184   
                let mut uri = ::std::string::String::new();
  185    185   
                uri_base(input, &mut uri)?;
  186    186   
                ::std::result::Result::Ok(builder.method("POST").uri(uri))
  187    187   
            }
  188         -
            let mut builder = update_http_builder(&input, ::http::request::Builder::new())?;
  189         -
            builder = _header_serialization_settings.set_default_header(builder, ::http::header::CONTENT_TYPE, "application/x-amz-json-1.1");
         188  +
            let mut builder = update_http_builder(&input, ::http_1x::request::Builder::new())?;
         189  +
            builder = _header_serialization_settings.set_default_header(builder, ::http_1x::header::CONTENT_TYPE, "application/x-amz-json-1.1");
  190    190   
            builder = _header_serialization_settings.set_default_header(
  191    191   
                builder,
  192         -
                ::http::header::HeaderName::from_static("x-amz-target"),
         192  +
                ::http_1x::header::HeaderName::from_static("x-amz-target"),
  193    193   
                "TrentService.Verify",
  194    194   
            );
  195    195   
            builder
  196    196   
        };
  197    197   
        let body = ::aws_smithy_types::body::SdkBody::from(crate::protocol_serde::shape_verify::ser_verify_input(&input)?);
  198    198   
        if let Some(content_length) = body.content_length() {
  199    199   
            let content_length = content_length.to_string();
  200         -
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http::header::CONTENT_LENGTH, &content_length);
         200  +
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http_1x::header::CONTENT_LENGTH, &content_length);
  201    201   
        }
  202    202   
        ::std::result::Result::Ok(request_builder.body(body).expect("valid request").try_into().unwrap())
  203    203   
    }
  204    204   
}
  205    205   
#[derive(Debug)]
  206    206   
struct VerifyEndpointParamsInterceptor;
  207    207   
  208    208   
impl ::aws_smithy_runtime_api::client::interceptors::Intercept for VerifyEndpointParamsInterceptor {
  209    209   
    fn name(&self) -> &'static str {
  210    210   
        "VerifyEndpointParamsInterceptor"

tmp-codegen-diff/aws-sdk/sdk/kms/src/operation/verify_mac.rs

@@ -160,160 +238,238 @@
  180    180   
                _input: &crate::operation::verify_mac::VerifyMacInput,
  181    181   
                output: &mut ::std::string::String,
  182    182   
            ) -> ::std::result::Result<(), ::aws_smithy_types::error::operation::BuildError> {
  183    183   
                use ::std::fmt::Write as _;
  184    184   
                ::std::write!(output, "/").expect("formatting should succeed");
  185    185   
                ::std::result::Result::Ok(())
  186    186   
            }
  187    187   
            #[allow(clippy::unnecessary_wraps)]
  188    188   
            fn update_http_builder(
  189    189   
                input: &crate::operation::verify_mac::VerifyMacInput,
  190         -
                builder: ::http::request::Builder,
  191         -
            ) -> ::std::result::Result<::http::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
         190  +
                builder: ::http_1x::request::Builder,
         191  +
            ) -> ::std::result::Result<::http_1x::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
  192    192   
                let mut uri = ::std::string::String::new();
  193    193   
                uri_base(input, &mut uri)?;
  194    194   
                ::std::result::Result::Ok(builder.method("POST").uri(uri))
  195    195   
            }
  196         -
            let mut builder = update_http_builder(&input, ::http::request::Builder::new())?;
  197         -
            builder = _header_serialization_settings.set_default_header(builder, ::http::header::CONTENT_TYPE, "application/x-amz-json-1.1");
         196  +
            let mut builder = update_http_builder(&input, ::http_1x::request::Builder::new())?;
         197  +
            builder = _header_serialization_settings.set_default_header(builder, ::http_1x::header::CONTENT_TYPE, "application/x-amz-json-1.1");
  198    198   
            builder = _header_serialization_settings.set_default_header(
  199    199   
                builder,
  200         -
                ::http::header::HeaderName::from_static("x-amz-target"),
         200  +
                ::http_1x::header::HeaderName::from_static("x-amz-target"),
  201    201   
                "TrentService.VerifyMac",
  202    202   
            );
  203    203   
            builder
  204    204   
        };
  205    205   
        let body = ::aws_smithy_types::body::SdkBody::from(crate::protocol_serde::shape_verify_mac::ser_verify_mac_input(&input)?);
  206    206   
        if let Some(content_length) = body.content_length() {
  207    207   
            let content_length = content_length.to_string();
  208         -
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http::header::CONTENT_LENGTH, &content_length);
         208  +
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http_1x::header::CONTENT_LENGTH, &content_length);
  209    209   
        }
  210    210   
        ::std::result::Result::Ok(request_builder.body(body).expect("valid request").try_into().unwrap())
  211    211   
    }
  212    212   
}
  213    213   
#[derive(Debug)]
  214    214   
struct VerifyMacEndpointParamsInterceptor;
  215    215   
  216    216   
impl ::aws_smithy_runtime_api::client::interceptors::Intercept for VerifyMacEndpointParamsInterceptor {
  217    217   
    fn name(&self) -> &'static str {
  218    218   
        "VerifyMacEndpointParamsInterceptor"

tmp-codegen-diff/aws-sdk/sdk/kms/src/serialization_settings.rs

@@ -1,1 +78,83 @@
    1      1   
// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
    2      2   
/*
    3      3   
 * Copyright Amazon.com, Inc. or its affiliates. All Rights Reserved.
    4      4   
 * SPDX-License-Identifier: Apache-2.0
    5      5   
 */
    6      6   
    7      7   
#![allow(dead_code)]
    8      8   
    9      9   
use aws_smithy_http::header::set_request_header_if_absent;
   10     10   
use aws_smithy_types::config_bag::{Storable, StoreReplace};
   11         -
use http::header::{HeaderName, CONTENT_LENGTH, CONTENT_TYPE};
          11  +
use http_1x::header::{HeaderName, CONTENT_LENGTH, CONTENT_TYPE};
   12     12   
   13     13   
/// Configuration for how default protocol headers are serialized
   14     14   
#[derive(Clone, Debug, Default)]
   15     15   
pub(crate) struct HeaderSerializationSettings {
   16     16   
    omit_default_content_length: bool,
   17     17   
    omit_default_content_type: bool,
   18     18   
}
   19     19   
   20     20   
impl HeaderSerializationSettings {
   21     21   
    /// Creates new [`HeaderSerializationSettings`]
   22     22   
    pub(crate) fn new() -> Self {
   23     23   
        Default::default()
   24     24   
    }
   25     25   
   26     26   
    /// Omit the default `Content-Length` header during serialization
   27     27   
    pub(crate) fn omit_default_content_length(self) -> Self {
   28     28   
        Self {
   29     29   
            omit_default_content_length: true,
   30     30   
            ..self
   31     31   
        }
   32     32   
    }
   33     33   
   34     34   
    /// Omit the default `Content-Type` header during serialization
   35     35   
    pub(crate) fn omit_default_content_type(self) -> Self {
   36     36   
        Self {
   37     37   
            omit_default_content_type: true,
   38     38   
            ..self
   39     39   
        }
   40     40   
    }
   41     41   
   42     42   
    /// Returns true if the given default header name should be serialized
   43     43   
    fn include_header(&self, header: &HeaderName) -> bool {
   44     44   
        (!self.omit_default_content_length || header != CONTENT_LENGTH) && (!self.omit_default_content_type || header != CONTENT_TYPE)
   45     45   
    }
   46     46   
   47     47   
    /// Sets a default header on the given request builder if it should be serialized
   48         -
    pub(crate) fn set_default_header(&self, mut request: http::request::Builder, header_name: HeaderName, value: &str) -> http::request::Builder {
          48  +
    pub(crate) fn set_default_header(
          49  +
        &self,
          50  +
        mut request: http_1x::request::Builder,
          51  +
        header_name: HeaderName,
          52  +
        value: &str,
          53  +
    ) -> http_1x::request::Builder {
   49     54   
        if self.include_header(&header_name) {
   50     55   
            request = set_request_header_if_absent(request, header_name, value);
   51     56   
        }
   52     57   
        request
   53     58   
    }
   54     59   
}
   55     60   
   56     61   
impl Storable for HeaderSerializationSettings {
   57     62   
    type Storer = StoreReplace<Self>;
   58     63   
}

tmp-codegen-diff/aws-sdk/sdk/lambda/Cargo.toml

@@ -1,1 +161,162 @@
   15     15   
[package.metadata.docs.rs]
   16     16   
all-features = true
   17     17   
targets = ["x86_64-unknown-linux-gnu"]
   18     18   
[dependencies.aws-credential-types]
   19     19   
path = "../aws-credential-types"
   20     20   
version = "1.2.11"
   21     21   
   22     22   
[dependencies.aws-runtime]
   23     23   
path = "../aws-runtime"
   24     24   
features = ["event-stream"]
   25         -
version = "1.5.18"
          25  +
version = "1.6.0"
   26     26   
   27     27   
[dependencies.aws-smithy-async]
   28     28   
path = "../aws-smithy-async"
   29         -
version = "1.2.7"
          29  +
version = "1.2.8"
   30     30   
   31     31   
[dependencies.aws-smithy-eventstream]
   32     32   
path = "../aws-smithy-eventstream"
   33         -
version = "0.60.14"
          33  +
version = "0.60.15"
   34     34   
   35     35   
[dependencies.aws-smithy-http]
   36     36   
path = "../aws-smithy-http"
   37     37   
features = ["event-stream"]
   38         -
version = "0.62.6"
          38  +
version = "0.63.0"
   39     39   
   40     40   
[dependencies.aws-smithy-json]
   41     41   
path = "../aws-smithy-json"
   42         -
version = "0.61.9"
          42  +
version = "0.62.0"
   43     43   
   44     44   
[dependencies.aws-smithy-observability]
   45     45   
path = "../aws-smithy-observability"
   46         -
version = "0.2.0"
          46  +
version = "0.2.1"
   47     47   
   48     48   
[dependencies.aws-smithy-runtime]
   49     49   
path = "../aws-smithy-runtime"
   50     50   
features = ["client"]
   51         -
version = "1.9.8"
          51  +
version = "1.10.0"
   52     52   
   53     53   
[dependencies.aws-smithy-runtime-api]
   54     54   
path = "../aws-smithy-runtime-api"
   55         -
features = ["client", "http-02x"]
   56         -
version = "1.10.0"
          55  +
features = ["client", "http-1x"]
          56  +
version = "1.11.0"
   57     57   
   58     58   
[dependencies.aws-smithy-types]
   59     59   
path = "../aws-smithy-types"
   60         -
version = "1.3.6"
          60  +
features = ["http-body-1-x"]
          61  +
version = "1.4.0"
   61     62   
   62     63   
[dependencies.aws-types]
   63     64   
path = "../aws-types"
   64     65   
version = "1.3.11"
   65     66   
   66     67   
[dependencies.bytes]
   67     68   
version = "1.4.0"
   68     69   
   69     70   
[dependencies.fastrand]
   70     71   
version = "2.0.0"
   71     72   
   72     73   
[dependencies.http]
   73     74   
version = "0.2.9"
   74     75   
          76  +
[dependencies.http-1x]
          77  +
version = "1"
          78  +
package = "http"
          79  +
   75     80   
[dependencies.regex-lite]
   76     81   
version = "0.1.5"
   77     82   
   78     83   
[dependencies.tracing]
   79     84   
version = "0.1"
   80     85   
[dev-dependencies.aws-config]
   81     86   
path = "../aws-config"
   82     87   
version = "1.8.12"
   83     88   
   84     89   
[dev-dependencies.aws-credential-types]
   85     90   
path = "../aws-credential-types"
   86     91   
features = ["test-util"]
   87     92   
version = "1.2.11"
   88     93   
   89     94   
[dev-dependencies.aws-runtime]
   90     95   
path = "../aws-runtime"
   91     96   
features = ["test-util"]
   92         -
version = "1.5.18"
          97  +
version = "1.6.0"
   93     98   
   94     99   
[dev-dependencies.aws-smithy-async]
   95    100   
path = "../aws-smithy-async"
   96    101   
features = ["test-util"]
   97         -
version = "1.2.7"
         102  +
version = "1.2.8"
   98    103   
   99    104   
[dev-dependencies.aws-smithy-eventstream]
  100    105   
path = "../aws-smithy-eventstream"
  101    106   
features = ["test-util"]
  102         -
version = "0.60.14"
         107  +
version = "0.60.15"
  103    108   
  104    109   
[dev-dependencies.aws-smithy-http-client]
  105    110   
path = "../aws-smithy-http-client"
  106    111   
features = ["test-util", "wire-mock"]
  107         -
version = "1.1.5"
         112  +
version = "1.1.6"
  108    113   
  109    114   
[dev-dependencies.aws-smithy-protocol-test]
  110    115   
path = "../aws-smithy-protocol-test"
  111         -
version = "0.63.7"
         116  +
version = "0.63.8"
  112    117   
  113    118   
[dev-dependencies.aws-smithy-runtime]
  114    119   
path = "../aws-smithy-runtime"
  115    120   
features = ["test-util"]
  116         -
version = "1.9.8"
         121  +
version = "1.10.0"
  117    122   
  118    123   
[dev-dependencies.aws-smithy-runtime-api]
  119    124   
path = "../aws-smithy-runtime-api"
  120    125   
features = ["test-util"]
  121         -
version = "1.10.0"
         126  +
version = "1.11.0"
  122    127   
  123    128   
[dev-dependencies.aws-smithy-types]
  124    129   
path = "../aws-smithy-types"
  125         -
features = ["test-util"]
  126         -
version = "1.3.6"
         130  +
features = ["http-body-1-x", "test-util"]
         131  +
version = "1.4.0"
  127    132   
  128    133   
[dev-dependencies.futures-util]
  129    134   
version = "0.3.25"
  130    135   
features = ["alloc"]
  131    136   
default-features = false
  132    137   
  133         -
[dev-dependencies.http-1x]
  134         -
version = "1"
  135         -
package = "http"
  136         -
  137    138   
[dev-dependencies.proptest]
  138    139   
version = "1"
  139    140   
  140    141   
[dev-dependencies.serde_json]
  141    142   
version = "1.0.0"
  142    143   
  143    144   
[dev-dependencies.tokio]
  144    145   
version = "1.23.1"
  145    146   
features = ["macros", "test-util", "rt-multi-thread"]
  146    147   
  147    148   
[dev-dependencies.tracing-subscriber]
  148    149   
version = "0.3.16"
  149    150   
features = ["env-filter", "json"]
  150    151   
  151    152   
[features]
  152    153   
behavior-version-latest = []
  153    154   
rustls = ["aws-smithy-runtime/tls-rustls"]
  154    155   
default-https-client = ["aws-smithy-runtime/default-https-client"]
  155    156   
test-util = ["aws-credential-types/test-util", "aws-smithy-runtime/test-util"]
  156         -
rt-tokio = ["aws-smithy-async/rt-tokio", "aws-smithy-types/rt-tokio"]
         157  +
rt-tokio = ["aws-smithy-async/rt-tokio", "aws-smithy-types/http-body-1-x", "aws-smithy-types/rt-tokio"]
  157    158   
gated-tests = []
  158    159   
default = ["rustls", "default-https-client", "rt-tokio"]
  159    160   
  160    161   
[hints]
  161    162   
mostly-unused = true

tmp-codegen-diff/aws-sdk/sdk/lambda/src/json_errors.rs

@@ -1,1 +45,45 @@
    5      5   
 */
    6      6   
    7      7   
use aws_smithy_json::deserialize::token::skip_value;
    8      8   
use aws_smithy_json::deserialize::{error::DeserializeError, json_token_iter, Token};
    9      9   
use aws_smithy_runtime_api::http::Headers;
   10     10   
use aws_smithy_types::error::metadata::{Builder as ErrorMetadataBuilder, ErrorMetadata};
   11     11   
use std::borrow::Cow;
   12     12   
   13     13   
// currently only used by AwsJson
   14     14   
#[allow(unused)]
   15         -
pub fn is_error<B>(response: &http::Response<B>) -> bool {
          15  +
pub fn is_error<B>(response: &http_1x::Response<B>) -> bool {
   16     16   
    !response.status().is_success()
   17     17   
}
   18     18   
   19     19   
fn sanitize_error_code(error_code: &str) -> &str {
   20     20   
    // Trim a trailing URL from the error code, which is done by removing the longest suffix
   21     21   
    // beginning with a `:`
   22     22   
    let error_code = match error_code.find(':') {
   23     23   
        Some(idx) => &error_code[..idx],
   24     24   
        None => error_code,
   25     25   
    };
@@ -60,60 +120,120 @@
   80     80   
#[cfg(test)]
   81     81   
mod test {
   82     82   
    use crate::json_errors::{parse_error_body, parse_error_metadata, sanitize_error_code};
   83     83   
    use aws_smithy_runtime_api::client::orchestrator::HttpResponse;
   84     84   
    use aws_smithy_types::{body::SdkBody, error::ErrorMetadata};
   85     85   
    use std::borrow::Cow;
   86     86   
   87     87   
    #[test]
   88     88   
    fn error_metadata() {
   89     89   
        let response = HttpResponse::try_from(
   90         -
            http::Response::builder()
          90  +
            http_1x::Response::builder()
   91     91   
                .body(SdkBody::from(r#"{ "__type": "FooError", "message": "Go to foo" }"#))
   92     92   
                .unwrap(),
   93     93   
        )
   94     94   
        .unwrap();
   95     95   
        assert_eq!(
   96     96   
            parse_error_metadata(response.body().bytes().unwrap(), response.headers())
   97     97   
                .unwrap()
   98     98   
                .build(),
   99     99   
            ErrorMetadata::builder().code("FooError").message("Go to foo").build()
  100    100   
        )
@@ -129,129 +180,180 @@
  149    149   
  150    150   
    #[test]
  151    151   
    fn sanitize_namespace() {
  152    152   
        assert_eq!(sanitize_error_code("aws.protocoltests.restjson#FooError"), "FooError");
  153    153   
    }
  154    154   
  155    155   
    // services like lambda use an alternate `Message` instead of `message`
  156    156   
    #[test]
  157    157   
    fn alternative_error_message_names() {
  158    158   
        let response = HttpResponse::try_from(
  159         -
            http::Response::builder()
         159  +
            http_1x::Response::builder()
  160    160   
                .header("x-amzn-errortype", "ResourceNotFoundException")
  161    161   
                .body(SdkBody::from(
  162    162   
                    r#"{
  163    163   
                    "Type": "User",
  164    164   
                    "Message": "Functions from 'us-west-2' are not reachable from us-east-1"
  165    165   
                }"#,
  166    166   
                ))
  167    167   
                .unwrap(),
  168    168   
        )
  169    169   
        .unwrap();

tmp-codegen-diff/aws-sdk/sdk/lambda/src/operation/add_layer_version_permission.rs

@@ -206,206 +282,282 @@
  226    226   
                if let ::std::option::Option::Some(inner_3) = &_input.revision_id {
  227    227   
                    {
  228    228   
                        query.push_kv("RevisionId", &::aws_smithy_http::query::fmt_string(inner_3));
  229    229   
                    }
  230    230   
                }
  231    231   
                ::std::result::Result::Ok(())
  232    232   
            }
  233    233   
            #[allow(clippy::unnecessary_wraps)]
  234    234   
            fn update_http_builder(
  235    235   
                input: &crate::operation::add_layer_version_permission::AddLayerVersionPermissionInput,
  236         -
                builder: ::http::request::Builder,
  237         -
            ) -> ::std::result::Result<::http::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
         236  +
                builder: ::http_1x::request::Builder,
         237  +
            ) -> ::std::result::Result<::http_1x::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
  238    238   
                let mut uri = ::std::string::String::new();
  239    239   
                uri_base(input, &mut uri)?;
  240    240   
                uri_query(input, &mut uri)?;
  241    241   
                ::std::result::Result::Ok(builder.method("POST").uri(uri))
  242    242   
            }
  243         -
            let mut builder = update_http_builder(&input, ::http::request::Builder::new())?;
  244         -
            builder = _header_serialization_settings.set_default_header(builder, ::http::header::CONTENT_TYPE, "application/json");
         243  +
            let mut builder = update_http_builder(&input, ::http_1x::request::Builder::new())?;
         244  +
            builder = _header_serialization_settings.set_default_header(builder, ::http_1x::header::CONTENT_TYPE, "application/json");
  245    245   
            builder
  246    246   
        };
  247    247   
        let body = ::aws_smithy_types::body::SdkBody::from(
  248    248   
            crate::protocol_serde::shape_add_layer_version_permission::ser_add_layer_version_permission_input(&input)?,
  249    249   
        );
  250    250   
        if let Some(content_length) = body.content_length() {
  251    251   
            let content_length = content_length.to_string();
  252         -
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http::header::CONTENT_LENGTH, &content_length);
         252  +
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http_1x::header::CONTENT_LENGTH, &content_length);
  253    253   
        }
  254    254   
        ::std::result::Result::Ok(request_builder.body(body).expect("valid request").try_into().unwrap())
  255    255   
    }
  256    256   
}
  257    257   
#[derive(Debug)]
  258    258   
struct AddLayerVersionPermissionEndpointParamsInterceptor;
  259    259   
  260    260   
impl ::aws_smithy_runtime_api::client::interceptors::Intercept for AddLayerVersionPermissionEndpointParamsInterceptor {
  261    261   
    fn name(&self) -> &'static str {
  262    262   
        "AddLayerVersionPermissionEndpointParamsInterceptor"

tmp-codegen-diff/aws-sdk/sdk/lambda/src/operation/add_permission.rs

@@ -186,186 +260,260 @@
  206    206   
                if let ::std::option::Option::Some(inner_2) = &_input.qualifier {
  207    207   
                    {
  208    208   
                        query.push_kv("Qualifier", &::aws_smithy_http::query::fmt_string(inner_2));
  209    209   
                    }
  210    210   
                }
  211    211   
                ::std::result::Result::Ok(())
  212    212   
            }
  213    213   
            #[allow(clippy::unnecessary_wraps)]
  214    214   
            fn update_http_builder(
  215    215   
                input: &crate::operation::add_permission::AddPermissionInput,
  216         -
                builder: ::http::request::Builder,
  217         -
            ) -> ::std::result::Result<::http::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
         216  +
                builder: ::http_1x::request::Builder,
         217  +
            ) -> ::std::result::Result<::http_1x::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
  218    218   
                let mut uri = ::std::string::String::new();
  219    219   
                uri_base(input, &mut uri)?;
  220    220   
                uri_query(input, &mut uri)?;
  221    221   
                ::std::result::Result::Ok(builder.method("POST").uri(uri))
  222    222   
            }
  223         -
            let mut builder = update_http_builder(&input, ::http::request::Builder::new())?;
  224         -
            builder = _header_serialization_settings.set_default_header(builder, ::http::header::CONTENT_TYPE, "application/json");
         223  +
            let mut builder = update_http_builder(&input, ::http_1x::request::Builder::new())?;
         224  +
            builder = _header_serialization_settings.set_default_header(builder, ::http_1x::header::CONTENT_TYPE, "application/json");
  225    225   
            builder
  226    226   
        };
  227    227   
        let body = ::aws_smithy_types::body::SdkBody::from(crate::protocol_serde::shape_add_permission::ser_add_permission_input(&input)?);
  228    228   
        if let Some(content_length) = body.content_length() {
  229    229   
            let content_length = content_length.to_string();
  230         -
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http::header::CONTENT_LENGTH, &content_length);
         230  +
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http_1x::header::CONTENT_LENGTH, &content_length);
  231    231   
        }
  232    232   
        ::std::result::Result::Ok(request_builder.body(body).expect("valid request").try_into().unwrap())
  233    233   
    }
  234    234   
}
  235    235   
#[derive(Debug)]
  236    236   
struct AddPermissionEndpointParamsInterceptor;
  237    237   
  238    238   
impl ::aws_smithy_runtime_api::client::interceptors::Intercept for AddPermissionEndpointParamsInterceptor {
  239    239   
    fn name(&self) -> &'static str {
  240    240   
        "AddPermissionEndpointParamsInterceptor"

tmp-codegen-diff/aws-sdk/sdk/lambda/src/operation/create_alias.rs

@@ -174,174 +247,247 @@
  194    194   
                        "cannot be empty or unset",
  195    195   
                    ));
  196    196   
                }
  197    197   
                ::std::write!(output, "/2015-03-31/functions/{FunctionName}/aliases", FunctionName = function_name)
  198    198   
                    .expect("formatting should succeed");
  199    199   
                ::std::result::Result::Ok(())
  200    200   
            }
  201    201   
            #[allow(clippy::unnecessary_wraps)]
  202    202   
            fn update_http_builder(
  203    203   
                input: &crate::operation::create_alias::CreateAliasInput,
  204         -
                builder: ::http::request::Builder,
  205         -
            ) -> ::std::result::Result<::http::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
         204  +
                builder: ::http_1x::request::Builder,
         205  +
            ) -> ::std::result::Result<::http_1x::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
  206    206   
                let mut uri = ::std::string::String::new();
  207    207   
                uri_base(input, &mut uri)?;
  208    208   
                ::std::result::Result::Ok(builder.method("POST").uri(uri))
  209    209   
            }
  210         -
            let mut builder = update_http_builder(&input, ::http::request::Builder::new())?;
  211         -
            builder = _header_serialization_settings.set_default_header(builder, ::http::header::CONTENT_TYPE, "application/json");
         210  +
            let mut builder = update_http_builder(&input, ::http_1x::request::Builder::new())?;
         211  +
            builder = _header_serialization_settings.set_default_header(builder, ::http_1x::header::CONTENT_TYPE, "application/json");
  212    212   
            builder
  213    213   
        };
  214    214   
        let body = ::aws_smithy_types::body::SdkBody::from(crate::protocol_serde::shape_create_alias::ser_create_alias_input(&input)?);
  215    215   
        if let Some(content_length) = body.content_length() {
  216    216   
            let content_length = content_length.to_string();
  217         -
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http::header::CONTENT_LENGTH, &content_length);
         217  +
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http_1x::header::CONTENT_LENGTH, &content_length);
  218    218   
        }
  219    219   
        ::std::result::Result::Ok(request_builder.body(body).expect("valid request").try_into().unwrap())
  220    220   
    }
  221    221   
}
  222    222   
#[derive(Debug)]
  223    223   
struct CreateAliasEndpointParamsInterceptor;
  224    224   
  225    225   
impl ::aws_smithy_runtime_api::client::interceptors::Intercept for CreateAliasEndpointParamsInterceptor {
  226    226   
    fn name(&self) -> &'static str {
  227    227   
        "CreateAliasEndpointParamsInterceptor"

tmp-codegen-diff/aws-sdk/sdk/lambda/src/operation/create_code_signing_config.rs

@@ -165,165 +240,240 @@
  185    185   
                _input: &crate::operation::create_code_signing_config::CreateCodeSigningConfigInput,
  186    186   
                output: &mut ::std::string::String,
  187    187   
            ) -> ::std::result::Result<(), ::aws_smithy_types::error::operation::BuildError> {
  188    188   
                use ::std::fmt::Write as _;
  189    189   
                ::std::write!(output, "/2020-04-22/code-signing-configs").expect("formatting should succeed");
  190    190   
                ::std::result::Result::Ok(())
  191    191   
            }
  192    192   
            #[allow(clippy::unnecessary_wraps)]
  193    193   
            fn update_http_builder(
  194    194   
                input: &crate::operation::create_code_signing_config::CreateCodeSigningConfigInput,
  195         -
                builder: ::http::request::Builder,
  196         -
            ) -> ::std::result::Result<::http::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
         195  +
                builder: ::http_1x::request::Builder,
         196  +
            ) -> ::std::result::Result<::http_1x::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
  197    197   
                let mut uri = ::std::string::String::new();
  198    198   
                uri_base(input, &mut uri)?;
  199    199   
                ::std::result::Result::Ok(builder.method("POST").uri(uri))
  200    200   
            }
  201         -
            let mut builder = update_http_builder(&input, ::http::request::Builder::new())?;
  202         -
            builder = _header_serialization_settings.set_default_header(builder, ::http::header::CONTENT_TYPE, "application/json");
         201  +
            let mut builder = update_http_builder(&input, ::http_1x::request::Builder::new())?;
         202  +
            builder = _header_serialization_settings.set_default_header(builder, ::http_1x::header::CONTENT_TYPE, "application/json");
  203    203   
            builder
  204    204   
        };
  205    205   
        let body = ::aws_smithy_types::body::SdkBody::from(
  206    206   
            crate::protocol_serde::shape_create_code_signing_config::ser_create_code_signing_config_input(&input)?,
  207    207   
        );
  208    208   
        if let Some(content_length) = body.content_length() {
  209    209   
            let content_length = content_length.to_string();
  210         -
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http::header::CONTENT_LENGTH, &content_length);
         210  +
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http_1x::header::CONTENT_LENGTH, &content_length);
  211    211   
        }
  212    212   
        ::std::result::Result::Ok(request_builder.body(body).expect("valid request").try_into().unwrap())
  213    213   
    }
  214    214   
}
  215    215   
#[derive(Debug)]
  216    216   
struct CreateCodeSigningConfigEndpointParamsInterceptor;
  217    217   
  218    218   
impl ::aws_smithy_runtime_api::client::interceptors::Intercept for CreateCodeSigningConfigEndpointParamsInterceptor {
  219    219   
    fn name(&self) -> &'static str {
  220    220   
        "CreateCodeSigningConfigEndpointParamsInterceptor"

tmp-codegen-diff/aws-sdk/sdk/lambda/src/operation/create_event_source_mapping.rs

@@ -165,165 +240,240 @@
  185    185   
                _input: &crate::operation::create_event_source_mapping::CreateEventSourceMappingInput,
  186    186   
                output: &mut ::std::string::String,
  187    187   
            ) -> ::std::result::Result<(), ::aws_smithy_types::error::operation::BuildError> {
  188    188   
                use ::std::fmt::Write as _;
  189    189   
                ::std::write!(output, "/2015-03-31/event-source-mappings").expect("formatting should succeed");
  190    190   
                ::std::result::Result::Ok(())
  191    191   
            }
  192    192   
            #[allow(clippy::unnecessary_wraps)]
  193    193   
            fn update_http_builder(
  194    194   
                input: &crate::operation::create_event_source_mapping::CreateEventSourceMappingInput,
  195         -
                builder: ::http::request::Builder,
  196         -
            ) -> ::std::result::Result<::http::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
         195  +
                builder: ::http_1x::request::Builder,
         196  +
            ) -> ::std::result::Result<::http_1x::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
  197    197   
                let mut uri = ::std::string::String::new();
  198    198   
                uri_base(input, &mut uri)?;
  199    199   
                ::std::result::Result::Ok(builder.method("POST").uri(uri))
  200    200   
            }
  201         -
            let mut builder = update_http_builder(&input, ::http::request::Builder::new())?;
  202         -
            builder = _header_serialization_settings.set_default_header(builder, ::http::header::CONTENT_TYPE, "application/json");
         201  +
            let mut builder = update_http_builder(&input, ::http_1x::request::Builder::new())?;
         202  +
            builder = _header_serialization_settings.set_default_header(builder, ::http_1x::header::CONTENT_TYPE, "application/json");
  203    203   
            builder
  204    204   
        };
  205    205   
        let body = ::aws_smithy_types::body::SdkBody::from(
  206    206   
            crate::protocol_serde::shape_create_event_source_mapping::ser_create_event_source_mapping_input(&input)?,
  207    207   
        );
  208    208   
        if let Some(content_length) = body.content_length() {
  209    209   
            let content_length = content_length.to_string();
  210         -
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http::header::CONTENT_LENGTH, &content_length);
         210  +
            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http_1x::header::CONTENT_LENGTH, &content_length);
  211    211   
        }
  212    212   
        ::std::result::Result::Ok(request_builder.body(body).expect("valid request").try_into().unwrap())
  213    213   
    }
  214    214   
}
  215    215   
#[derive(Debug)]
  216    216   
struct CreateEventSourceMappingEndpointParamsInterceptor;
  217    217   
  218    218   
impl ::aws_smithy_runtime_api::client::interceptors::Intercept for CreateEventSourceMappingEndpointParamsInterceptor {
  219    219   
    fn name(&self) -> &'static str {
  220    220   
        "CreateEventSourceMappingEndpointParamsInterceptor"