Server Test

Server Test

rev. d06a46cae0f385cdae37a9f8264db3469a090ab5 (ignoring whitespace)

Files changed:

tmp-codegen-diff/codegen-server-test/s3-http0x/rust-server-codegen/src/operation.rs

@@ -0,1 +0,946 @@
           1  +
// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
           2  +
::pin_project_lite::pin_project! {
           3  +
    /// A [`Future`](std::future::Future) aggregating the body bytes of a [`Request`] and constructing the
           4  +
    /// [`GetObjectInput`](crate::input::GetObjectInput) using modelled bindings.
           5  +
    pub struct GetObjectInputFuture {
           6  +
        inner: std::pin::Pin<Box<dyn std::future::Future<Output = Result<crate::input::GetObjectInput, ::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError>> + Send>>
           7  +
    }
           8  +
}
           9  +
          10  +
impl std::future::Future for GetObjectInputFuture {
          11  +
    type Output = Result<
          12  +
        crate::input::GetObjectInput,
          13  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError,
          14  +
    >;
          15  +
          16  +
    fn poll(
          17  +
        self: std::pin::Pin<&mut Self>,
          18  +
        cx: &mut std::task::Context<'_>,
          19  +
    ) -> std::task::Poll<Self::Output> {
          20  +
        let this = self.project();
          21  +
        this.inner.as_mut().poll(cx)
          22  +
    }
          23  +
}
          24  +
          25  +
impl<B>
          26  +
    ::aws_smithy_legacy_http_server::request::FromRequest<
          27  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml,
          28  +
        B,
          29  +
    > for crate::input::GetObjectInput
          30  +
where
          31  +
    B: ::aws_smithy_legacy_http_server::body::HttpBody + Send,
          32  +
    B: 'static,
          33  +
          34  +
    B::Data: Send,
          35  +
    ::aws_smithy_legacy_http_server::protocol::rest_xml::rejection::RequestRejection:
          36  +
        From<<B as ::aws_smithy_legacy_http_server::body::HttpBody>::Error>,
          37  +
{
          38  +
    type Rejection =
          39  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError;
          40  +
    type Future = GetObjectInputFuture;
          41  +
          42  +
    fn from_request(request: ::http::Request<B>) -> Self::Future {
          43  +
        let fut = async move {
          44  +
            crate::protocol_serde::shape_get_object::de_get_object_http_request(request).await
          45  +
        };
          46  +
        use ::futures_util::future::TryFutureExt;
          47  +
        let fut = fut.map_err(|e: ::aws_smithy_legacy_http_server::protocol::rest_xml::rejection::RequestRejection| {
          48  +
                        ::tracing::debug!(error = %e, "failed to deserialize request");
          49  +
                        ::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError::from(e)
          50  +
                    });
          51  +
        GetObjectInputFuture {
          52  +
            inner: Box::pin(fut),
          53  +
        }
          54  +
    }
          55  +
}
          56  +
impl
          57  +
    ::aws_smithy_legacy_http_server::response::IntoResponse<
          58  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml,
          59  +
    > for crate::output::GetObjectOutput
          60  +
{
          61  +
    fn into_response(self) -> ::aws_smithy_legacy_http_server::response::Response {
          62  +
        match crate::protocol_serde::shape_get_object::ser_get_object_http_response(self) {
          63  +
            Ok(response) => response,
          64  +
            Err(e) => {
          65  +
                ::tracing::error!(error = %e, "failed to serialize response");
          66  +
                ::aws_smithy_legacy_http_server::response::IntoResponse::<::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml>::into_response(::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError::from(e))
          67  +
            }
          68  +
        }
          69  +
    }
          70  +
}
          71  +
impl
          72  +
    ::aws_smithy_legacy_http_server::response::IntoResponse<
          73  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml,
          74  +
    > for crate::error::GetObjectError
          75  +
{
          76  +
    fn into_response(self) -> ::aws_smithy_legacy_http_server::response::Response {
          77  +
        match crate::protocol_serde::shape_get_object::ser_get_object_http_error(&self) {
          78  +
            Ok(mut response) => {
          79  +
                response.extensions_mut().insert(
          80  +
                    ::aws_smithy_legacy_http_server::extension::ModeledErrorExtension::new(
          81  +
                        self.name(),
          82  +
                    ),
          83  +
                );
          84  +
                response
          85  +
            }
          86  +
            Err(e) => {
          87  +
                ::tracing::error!(error = %e, "failed to serialize response");
          88  +
                ::aws_smithy_legacy_http_server::response::IntoResponse::<::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml>::into_response(::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError::from(e))
          89  +
            }
          90  +
        }
          91  +
    }
          92  +
}
          93  +
          94  +
::pin_project_lite::pin_project! {
          95  +
    /// A [`Future`](std::future::Future) aggregating the body bytes of a [`Request`] and constructing the
          96  +
    /// [`DeleteObjectTaggingInput`](crate::input::DeleteObjectTaggingInput) using modelled bindings.
          97  +
    pub struct DeleteObjectTaggingInputFuture {
          98  +
        inner: std::pin::Pin<Box<dyn std::future::Future<Output = Result<crate::input::DeleteObjectTaggingInput, ::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError>> + Send>>
          99  +
    }
         100  +
}
         101  +
         102  +
impl std::future::Future for DeleteObjectTaggingInputFuture {
         103  +
    type Output = Result<
         104  +
        crate::input::DeleteObjectTaggingInput,
         105  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError,
         106  +
    >;
         107  +
         108  +
    fn poll(
         109  +
        self: std::pin::Pin<&mut Self>,
         110  +
        cx: &mut std::task::Context<'_>,
         111  +
    ) -> std::task::Poll<Self::Output> {
         112  +
        let this = self.project();
         113  +
        this.inner.as_mut().poll(cx)
         114  +
    }
         115  +
}
         116  +
         117  +
impl<B>
         118  +
    ::aws_smithy_legacy_http_server::request::FromRequest<
         119  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml,
         120  +
        B,
         121  +
    > for crate::input::DeleteObjectTaggingInput
         122  +
where
         123  +
    B: ::aws_smithy_legacy_http_server::body::HttpBody + Send,
         124  +
    B: 'static,
         125  +
         126  +
    B::Data: Send,
         127  +
    ::aws_smithy_legacy_http_server::protocol::rest_xml::rejection::RequestRejection:
         128  +
        From<<B as ::aws_smithy_legacy_http_server::body::HttpBody>::Error>,
         129  +
{
         130  +
    type Rejection =
         131  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError;
         132  +
    type Future = DeleteObjectTaggingInputFuture;
         133  +
         134  +
    fn from_request(request: ::http::Request<B>) -> Self::Future {
         135  +
        let fut = async move {
         136  +
            crate::protocol_serde::shape_delete_object_tagging::de_delete_object_tagging_http_request(request)
         137  +
                            .await
         138  +
        };
         139  +
        use ::futures_util::future::TryFutureExt;
         140  +
        let fut = fut.map_err(|e: ::aws_smithy_legacy_http_server::protocol::rest_xml::rejection::RequestRejection| {
         141  +
                        ::tracing::debug!(error = %e, "failed to deserialize request");
         142  +
                        ::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError::from(e)
         143  +
                    });
         144  +
        DeleteObjectTaggingInputFuture {
         145  +
            inner: Box::pin(fut),
         146  +
        }
         147  +
    }
         148  +
}
         149  +
impl
         150  +
    ::aws_smithy_legacy_http_server::response::IntoResponse<
         151  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml,
         152  +
    > for crate::output::DeleteObjectTaggingOutput
         153  +
{
         154  +
    fn into_response(self) -> ::aws_smithy_legacy_http_server::response::Response {
         155  +
        match crate::protocol_serde::shape_delete_object_tagging::ser_delete_object_tagging_http_response(self) {
         156  +
                        Ok(response) => response,
         157  +
                        Err(e) => {
         158  +
                            ::tracing::error!(error = %e, "failed to serialize response");
         159  +
                            ::aws_smithy_legacy_http_server::response::IntoResponse::<::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml>::into_response(::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError::from(e))
         160  +
                        }
         161  +
                    }
         162  +
    }
         163  +
}
         164  +
impl
         165  +
    ::aws_smithy_legacy_http_server::response::IntoResponse<
         166  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml,
         167  +
    > for crate::error::DeleteObjectTaggingError
         168  +
{
         169  +
    fn into_response(self) -> ::aws_smithy_legacy_http_server::response::Response {
         170  +
        match crate::protocol_serde::shape_delete_object_tagging::ser_delete_object_tagging_http_error(&self) {
         171  +
            Ok(mut response) => {
         172  +
                response.extensions_mut().insert(::aws_smithy_legacy_http_server::extension::ModeledErrorExtension::new(self.name()));
         173  +
                response
         174  +
            },
         175  +
            Err(e) => {
         176  +
                ::tracing::error!(error = %e, "failed to serialize response");
         177  +
                ::aws_smithy_legacy_http_server::response::IntoResponse::<::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml>::into_response(::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError::from(e))
         178  +
            }
         179  +
        }
         180  +
    }
         181  +
}
         182  +
         183  +
::pin_project_lite::pin_project! {
         184  +
    /// A [`Future`](std::future::Future) aggregating the body bytes of a [`Request`] and constructing the
         185  +
    /// [`GetBucketLocationInput`](crate::input::GetBucketLocationInput) using modelled bindings.
         186  +
    pub struct GetBucketLocationInputFuture {
         187  +
        inner: std::pin::Pin<Box<dyn std::future::Future<Output = Result<crate::input::GetBucketLocationInput, ::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError>> + Send>>
         188  +
    }
         189  +
}
         190  +
         191  +
impl std::future::Future for GetBucketLocationInputFuture {
         192  +
    type Output = Result<
         193  +
        crate::input::GetBucketLocationInput,
         194  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError,
         195  +
    >;
         196  +
         197  +
    fn poll(
         198  +
        self: std::pin::Pin<&mut Self>,
         199  +
        cx: &mut std::task::Context<'_>,
         200  +
    ) -> std::task::Poll<Self::Output> {
         201  +
        let this = self.project();
         202  +
        this.inner.as_mut().poll(cx)
         203  +
    }
         204  +
}
         205  +
         206  +
impl<B>
         207  +
    ::aws_smithy_legacy_http_server::request::FromRequest<
         208  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml,
         209  +
        B,
         210  +
    > for crate::input::GetBucketLocationInput
         211  +
where
         212  +
    B: ::aws_smithy_legacy_http_server::body::HttpBody + Send,
         213  +
    B: 'static,
         214  +
         215  +
    B::Data: Send,
         216  +
    ::aws_smithy_legacy_http_server::protocol::rest_xml::rejection::RequestRejection:
         217  +
        From<<B as ::aws_smithy_legacy_http_server::body::HttpBody>::Error>,
         218  +
{
         219  +
    type Rejection =
         220  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError;
         221  +
    type Future = GetBucketLocationInputFuture;
         222  +
         223  +
    fn from_request(request: ::http::Request<B>) -> Self::Future {
         224  +
        let fut = async move {
         225  +
            if !::aws_smithy_legacy_http_server::protocol::accept_header_classifier(
         226  +
                request.headers(),
         227  +
                &crate::mimes::CONTENT_TYPE_APPLICATION_XML,
         228  +
            ) {
         229  +
                return Err(::aws_smithy_legacy_http_server::protocol::rest_xml::rejection::RequestRejection::NotAcceptable);
         230  +
            }
         231  +
            crate::protocol_serde::shape_get_bucket_location::de_get_bucket_location_http_request(
         232  +
                request,
         233  +
            )
         234  +
            .await
         235  +
        };
         236  +
        use ::futures_util::future::TryFutureExt;
         237  +
        let fut = fut.map_err(|e: ::aws_smithy_legacy_http_server::protocol::rest_xml::rejection::RequestRejection| {
         238  +
                        ::tracing::debug!(error = %e, "failed to deserialize request");
         239  +
                        ::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError::from(e)
         240  +
                    });
         241  +
        GetBucketLocationInputFuture {
         242  +
            inner: Box::pin(fut),
         243  +
        }
         244  +
    }
         245  +
}
         246  +
impl
         247  +
    ::aws_smithy_legacy_http_server::response::IntoResponse<
         248  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml,
         249  +
    > for crate::output::GetBucketLocationOutput
         250  +
{
         251  +
    fn into_response(self) -> ::aws_smithy_legacy_http_server::response::Response {
         252  +
        match crate::protocol_serde::shape_get_bucket_location::ser_get_bucket_location_http_response(self) {
         253  +
                        Ok(response) => response,
         254  +
                        Err(e) => {
         255  +
                            ::tracing::error!(error = %e, "failed to serialize response");
         256  +
                            ::aws_smithy_legacy_http_server::response::IntoResponse::<::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml>::into_response(::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError::from(e))
         257  +
                        }
         258  +
                    }
         259  +
    }
         260  +
}
         261  +
impl
         262  +
    ::aws_smithy_legacy_http_server::response::IntoResponse<
         263  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml,
         264  +
    > for crate::error::GetBucketLocationError
         265  +
{
         266  +
    fn into_response(self) -> ::aws_smithy_legacy_http_server::response::Response {
         267  +
        match crate::protocol_serde::shape_get_bucket_location::ser_get_bucket_location_http_error(
         268  +
            &self,
         269  +
        ) {
         270  +
            Ok(mut response) => {
         271  +
                response.extensions_mut().insert(
         272  +
                    ::aws_smithy_legacy_http_server::extension::ModeledErrorExtension::new(
         273  +
                        self.name(),
         274  +
                    ),
         275  +
                );
         276  +
                response
         277  +
            }
         278  +
            Err(e) => {
         279  +
                ::tracing::error!(error = %e, "failed to serialize response");
         280  +
                ::aws_smithy_legacy_http_server::response::IntoResponse::<::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml>::into_response(::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError::from(e))
         281  +
            }
         282  +
        }
         283  +
    }
         284  +
}
         285  +
         286  +
#[allow(unreachable_code, unused_variables)]
         287  +
#[cfg(test)]
         288  +
mod get_bucket_location_test {
         289  +
         290  +
    /// S3 clients should use the @s3UnwrappedXmlOutput trait to determine
         291  +
    /// that the response shape is not wrapped in a restxml operation-level XML node.
         292  +
    ///
         293  +
    /// Test ID: GetBucketLocationUnwrappedOutput
         294  +
    #[::tokio::test]
         295  +
    #[::tracing_test::traced_test]
         296  +
    #[should_panic]
         297  +
    async fn get_bucket_location_unwrapped_output_response() {
         298  +
        let output = crate::output::GetBucketLocationOutput {
         299  +
            location_constraint: ::std::option::Option::Some(
         300  +
                "us-west-2"
         301  +
                    .parse::<crate::model::BucketLocationConstraint>()
         302  +
                    .expect("static value validated to member"),
         303  +
            ),
         304  +
        };
         305  +
        use ::aws_smithy_legacy_http_server::response::IntoResponse;
         306  +
        let http_response = output.into_response();
         307  +
        ::pretty_assertions::assert_eq!(
         308  +
            ::http::StatusCode::from_u16(200).expect("invalid expected HTTP status code"),
         309  +
            http_response.status()
         310  +
        );
         311  +
        let body = ::hyper::body::to_bytes(http_response.into_body())
         312  +
            .await
         313  +
            .expect("unable to extract body to bytes");
         314  +
        ::aws_smithy_protocol_test::assert_ok(
         315  +
        ::aws_smithy_protocol_test::validate_body(&body, "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<LocationConstraint xmlns=\"http://s3.amazonaws.com/doc/2006-03-01/\">us-west-2</LocationConstraint>", ::aws_smithy_protocol_test::MediaType::from("unknown"))
         316  +
        );
         317  +
    }
         318  +
}
         319  +
         320  +
::pin_project_lite::pin_project! {
         321  +
    /// A [`Future`](std::future::Future) aggregating the body bytes of a [`Request`] and constructing the
         322  +
    /// [`ListObjectsV2Input`](crate::input::ListObjectsV2Input) using modelled bindings.
         323  +
    pub struct ListObjectsV2InputFuture {
         324  +
        inner: std::pin::Pin<Box<dyn std::future::Future<Output = Result<crate::input::ListObjectsV2Input, ::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError>> + Send>>
         325  +
    }
         326  +
}
         327  +
         328  +
impl std::future::Future for ListObjectsV2InputFuture {
         329  +
    type Output = Result<
         330  +
        crate::input::ListObjectsV2Input,
         331  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError,
         332  +
    >;
         333  +
         334  +
    fn poll(
         335  +
        self: std::pin::Pin<&mut Self>,
         336  +
        cx: &mut std::task::Context<'_>,
         337  +
    ) -> std::task::Poll<Self::Output> {
         338  +
        let this = self.project();
         339  +
        this.inner.as_mut().poll(cx)
         340  +
    }
         341  +
}
         342  +
         343  +
impl<B>
         344  +
    ::aws_smithy_legacy_http_server::request::FromRequest<
         345  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml,
         346  +
        B,
         347  +
    > for crate::input::ListObjectsV2Input
         348  +
where
         349  +
    B: ::aws_smithy_legacy_http_server::body::HttpBody + Send,
         350  +
    B: 'static,
         351  +
         352  +
    B::Data: Send,
         353  +
    ::aws_smithy_legacy_http_server::protocol::rest_xml::rejection::RequestRejection:
         354  +
        From<<B as ::aws_smithy_legacy_http_server::body::HttpBody>::Error>,
         355  +
{
         356  +
    type Rejection =
         357  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError;
         358  +
    type Future = ListObjectsV2InputFuture;
         359  +
         360  +
    fn from_request(request: ::http::Request<B>) -> Self::Future {
         361  +
        let fut = async move {
         362  +
            if !::aws_smithy_legacy_http_server::protocol::accept_header_classifier(
         363  +
                request.headers(),
         364  +
                &crate::mimes::CONTENT_TYPE_APPLICATION_XML,
         365  +
            ) {
         366  +
                return Err(::aws_smithy_legacy_http_server::protocol::rest_xml::rejection::RequestRejection::NotAcceptable);
         367  +
            }
         368  +
            crate::protocol_serde::shape_list_objects_v2::de_list_objects_v2_http_request(request)
         369  +
                .await
         370  +
        };
         371  +
        use ::futures_util::future::TryFutureExt;
         372  +
        let fut = fut.map_err(|e: ::aws_smithy_legacy_http_server::protocol::rest_xml::rejection::RequestRejection| {
         373  +
                        ::tracing::debug!(error = %e, "failed to deserialize request");
         374  +
                        ::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError::from(e)
         375  +
                    });
         376  +
        ListObjectsV2InputFuture {
         377  +
            inner: Box::pin(fut),
         378  +
        }
         379  +
    }
         380  +
}
         381  +
impl
         382  +
    ::aws_smithy_legacy_http_server::response::IntoResponse<
         383  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml,
         384  +
    > for crate::output::ListObjectsV2Output
         385  +
{
         386  +
    fn into_response(self) -> ::aws_smithy_legacy_http_server::response::Response {
         387  +
        match crate::protocol_serde::shape_list_objects_v2::ser_list_objects_v2_http_response(self)
         388  +
        {
         389  +
            Ok(response) => response,
         390  +
            Err(e) => {
         391  +
                ::tracing::error!(error = %e, "failed to serialize response");
         392  +
                ::aws_smithy_legacy_http_server::response::IntoResponse::<::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml>::into_response(::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError::from(e))
         393  +
            }
         394  +
        }
         395  +
    }
         396  +
}
         397  +
impl
         398  +
    ::aws_smithy_legacy_http_server::response::IntoResponse<
         399  +
        ::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml,
         400  +
    > for crate::error::ListObjectsV2Error
         401  +
{
         402  +
    fn into_response(self) -> ::aws_smithy_legacy_http_server::response::Response {
         403  +
        match crate::protocol_serde::shape_list_objects_v2::ser_list_objects_v2_http_error(&self) {
         404  +
            Ok(mut response) => {
         405  +
                response.extensions_mut().insert(
         406  +
                    ::aws_smithy_legacy_http_server::extension::ModeledErrorExtension::new(
         407  +
                        self.name(),
         408  +
                    ),
         409  +
                );
         410  +
                response
         411  +
            }
         412  +
            Err(e) => {
         413  +
                ::tracing::error!(error = %e, "failed to serialize response");
         414  +
                ::aws_smithy_legacy_http_server::response::IntoResponse::<::aws_smithy_legacy_http_server::protocol::rest_xml::RestXml>::into_response(::aws_smithy_legacy_http_server::protocol::rest_xml::runtime_error::RuntimeError::from(e))
         415  +
            }
         416  +
        }
         417  +
    }
         418  +
}
         419  +
         420  +
#[allow(unreachable_code, unused_variables)]
         421  +
#[cfg(test)]
         422  +
mod list_objects_v2_test {
         423  +
         424  +
    /// S3 clients should map the default addressing style to virtual host.
         425  +
    /// Test ID: S3DefaultAddressing
         426  +
    #[::tokio::test]
         427  +
    #[::tracing_test::traced_test]
         428  +
    #[should_panic]
         429  +
    async fn s3_default_addressing_request() {
         430  +
        #[allow(unused_mut)]
         431  +
        let mut http_request = ::http::Request::builder()
         432  +
            .uri("/")
         433  +
            .method("GET")
         434  +
            .body(::aws_smithy_legacy_http_server::body::Body::from(
         435  +
                ::bytes::Bytes::copy_from_slice(&::aws_smithy_protocol_test::decode_body_data(
         436  +
                    "".as_bytes(),
         437  +
                    ::aws_smithy_protocol_test::MediaType::from("unknown"),
         438  +
                )),
         439  +
            ))
         440  +
            .unwrap();
         441  +
        *http_request.uri_mut() = "/?list-type=2".parse().unwrap();
         442  +
        todo!("endpoint trait not supported yet");
         443  +
        #[allow(unused_mut)]
         444  +
        let (sender, mut receiver) = ::tokio::sync::mpsc::channel(1);
         445  +
        let config = crate::service::AmazonS3Config::builder().build();
         446  +
        let service = crate::service::AmazonS3::builder::<::hyper::body::Body, _, _, _>(config)
         447  +
            .list_objects_v2(move |input: crate::input::ListObjectsV2Input| {
         448  +
                let sender = sender.clone();
         449  +
                async move {
         450  +
                    let result = {
         451  +
                        let expected = crate::input::ListObjectsV2Input {
         452  +
                            bucket: "mybucket".to_owned(),
         453  +
                            delimiter: ::std::option::Option::None,
         454  +
                            encoding_type: ::std::option::Option::None,
         455  +
                            max_keys: ::std::option::Option::None,
         456  +
                            prefix: ::std::option::Option::None,
         457  +
                            continuation_token: ::std::option::Option::None,
         458  +
                            fetch_owner: ::std::option::Option::None,
         459  +
                            start_after: ::std::option::Option::None,
         460  +
                            request_payer: ::std::option::Option::None,
         461  +
                            expected_bucket_owner: ::std::option::Option::None,
         462  +
                        };
         463  +
                        ::pretty_assertions::assert_eq!(input, expected);
         464  +
                        let output = crate::output::ListObjectsV2Output {
         465  +
                            is_truncated: ::std::option::Option::None,
         466  +
                            contents: ::std::option::Option::None,
         467  +
                            name: ::std::option::Option::None,
         468  +
                            prefix: ::std::option::Option::None,
         469  +
                            delimiter: ::std::option::Option::None,
         470  +
                            max_keys: ::std::option::Option::None,
         471  +
                            common_prefixes: ::std::option::Option::None,
         472  +
                            encoding_type: ::std::option::Option::None,
         473  +
                            key_count: ::std::option::Option::None,
         474  +
                            continuation_token: ::std::option::Option::None,
         475  +
                            next_continuation_token: ::std::option::Option::None,
         476  +
                            start_after: ::std::option::Option::None,
         477  +
                        };
         478  +
                        Ok(output)
         479  +
                    };
         480  +
                    sender.send(()).await.expect("receiver dropped early");
         481  +
                    result
         482  +
                }
         483  +
            })
         484  +
            .build_unchecked();
         485  +
        let http_response = ::tower::ServiceExt::oneshot(service, http_request)
         486  +
            .await
         487  +
            .expect("unable to make an HTTP request");
         488  +
        assert!(
         489  +
            receiver.recv().await.is_some(),
         490  +
            "we expected operation handler to be invoked but it was not entered"
         491  +
        );
         492  +
    }
         493  +
         494  +
    /// S3 clients should support the explicit virtual host addressing style.
         495  +
    /// Test ID: S3VirtualHostAddressing
         496  +
    #[::tokio::test]
         497  +
    #[::tracing_test::traced_test]
         498  +
    #[should_panic]
         499  +
    async fn s3_virtual_host_addressing_request() {
         500  +
        #[allow(unused_mut)]
         501  +
        let mut http_request = ::http::Request::builder()
         502  +
            .uri("/")
         503  +
            .method("GET")
         504  +
            .body(::aws_smithy_legacy_http_server::body::Body::from(
         505  +
                ::bytes::Bytes::copy_from_slice(&::aws_smithy_protocol_test::decode_body_data(
         506  +
                    "".as_bytes(),
         507  +
                    ::aws_smithy_protocol_test::MediaType::from("unknown"),
         508  +
                )),
         509  +
            ))
         510  +
            .unwrap();
         511  +
        *http_request.uri_mut() = "/?list-type=2".parse().unwrap();
         512  +
        todo!("endpoint trait not supported yet");
         513  +
        #[allow(unused_mut)]
         514  +
        let (sender, mut receiver) = ::tokio::sync::mpsc::channel(1);
         515  +
        let config = crate::service::AmazonS3Config::builder().build();
         516  +
        let service = crate::service::AmazonS3::builder::<::hyper::body::Body, _, _, _>(config)
         517  +
            .list_objects_v2(move |input: crate::input::ListObjectsV2Input| {
         518  +
                let sender = sender.clone();
         519  +
                async move {
         520  +
                    let result = {
         521  +
                        let expected = crate::input::ListObjectsV2Input {
         522  +
                            bucket: "mybucket".to_owned(),
         523  +
                            delimiter: ::std::option::Option::None,
         524  +
                            encoding_type: ::std::option::Option::None,
         525  +
                            max_keys: ::std::option::Option::None,
         526  +
                            prefix: ::std::option::Option::None,
         527  +
                            continuation_token: ::std::option::Option::None,
         528  +
                            fetch_owner: ::std::option::Option::None,
         529  +
                            start_after: ::std::option::Option::None,
         530  +
                            request_payer: ::std::option::Option::None,
         531  +
                            expected_bucket_owner: ::std::option::Option::None,
         532  +
                        };
         533  +
                        ::pretty_assertions::assert_eq!(input, expected);
         534  +
                        let output = crate::output::ListObjectsV2Output {
         535  +
                            is_truncated: ::std::option::Option::None,
         536  +
                            contents: ::std::option::Option::None,
         537  +
                            name: ::std::option::Option::None,
         538  +
                            prefix: ::std::option::Option::None,
         539  +
                            delimiter: ::std::option::Option::None,
         540  +
                            max_keys: ::std::option::Option::None,
         541  +
                            common_prefixes: ::std::option::Option::None,
         542  +
                            encoding_type: ::std::option::Option::None,
         543  +
                            key_count: ::std::option::Option::None,
         544  +
                            continuation_token: ::std::option::Option::None,
         545  +
                            next_continuation_token: ::std::option::Option::None,
         546  +
                            start_after: ::std::option::Option::None,
         547  +
                        };
         548  +
                        Ok(output)
         549  +
                    };
         550  +
                    sender.send(()).await.expect("receiver dropped early");
         551  +
                    result
         552  +
                }
         553  +
            })
         554  +
            .build_unchecked();
         555  +
        let http_response = ::tower::ServiceExt::oneshot(service, http_request)
         556  +
            .await
         557  +
            .expect("unable to make an HTTP request");
         558  +
        assert!(
         559  +
            receiver.recv().await.is_some(),
         560  +
            "we expected operation handler to be invoked but it was not entered"
         561  +
        );
         562  +
    }
         563  +
         564  +
    /// S3 clients should support the explicit path addressing style.
         565  +
    /// Test ID: S3PathAddressing
         566  +
    #[::tokio::test]
         567  +
    #[::tracing_test::traced_test]
         568  +
    #[should_panic]
         569  +
    async fn s3_path_addressing_request() {
         570  +
        #[allow(unused_mut)]
         571  +
        let mut http_request = ::http::Request::builder()
         572  +
            .uri("/mybucket")
         573  +
            .method("GET")
         574  +
            .body(::aws_smithy_legacy_http_server::body::Body::from(
         575  +
                ::bytes::Bytes::copy_from_slice(&::aws_smithy_protocol_test::decode_body_data(
         576  +
                    "".as_bytes(),
         577  +
                    ::aws_smithy_protocol_test::MediaType::from("unknown"),
         578  +
                )),
         579  +
            ))
         580  +
            .unwrap();
         581  +
        *http_request.uri_mut() = "/mybucket?list-type=2".parse().unwrap();
         582  +
        todo!("endpoint trait not supported yet");
         583  +
        #[allow(unused_mut)]
         584  +
        let (sender, mut receiver) = ::tokio::sync::mpsc::channel(1);
         585  +
        let config = crate::service::AmazonS3Config::builder().build();
         586  +
        let service = crate::service::AmazonS3::builder::<::hyper::body::Body, _, _, _>(config)
         587  +
            .list_objects_v2(move |input: crate::input::ListObjectsV2Input| {
         588  +
                let sender = sender.clone();
         589  +
                async move {
         590  +
                    let result = {
         591  +
                        let expected = crate::input::ListObjectsV2Input {
         592  +
                            bucket: "mybucket".to_owned(),
         593  +
                            delimiter: ::std::option::Option::None,
         594  +
                            encoding_type: ::std::option::Option::None,
         595  +
                            max_keys: ::std::option::Option::None,
         596  +
                            prefix: ::std::option::Option::None,
         597  +
                            continuation_token: ::std::option::Option::None,
         598  +
                            fetch_owner: ::std::option::Option::None,
         599  +
                            start_after: ::std::option::Option::None,
         600  +
                            request_payer: ::std::option::Option::None,
         601  +
                            expected_bucket_owner: ::std::option::Option::None,
         602  +
                        };
         603  +
                        ::pretty_assertions::assert_eq!(input, expected);
         604  +
                        let output = crate::output::ListObjectsV2Output {
         605  +
                            is_truncated: ::std::option::Option::None,
         606  +
                            contents: ::std::option::Option::None,
         607  +
                            name: ::std::option::Option::None,
         608  +
                            prefix: ::std::option::Option::None,
         609  +
                            delimiter: ::std::option::Option::None,
         610  +
                            max_keys: ::std::option::Option::None,
         611  +
                            common_prefixes: ::std::option::Option::None,
         612  +
                            encoding_type: ::std::option::Option::None,
         613  +
                            key_count: ::std::option::Option::None,
         614  +
                            continuation_token: ::std::option::Option::None,
         615  +
                            next_continuation_token: ::std::option::Option::None,
         616  +
                            start_after: ::std::option::Option::None,
         617  +
                        };
         618  +
                        Ok(output)
         619  +
                    };
         620  +
                    sender.send(()).await.expect("receiver dropped early");
         621  +
                    result
         622  +
                }
         623  +
            })
         624  +
            .build_unchecked();
         625  +
        let http_response = ::tower::ServiceExt::oneshot(service, http_request)
         626  +
            .await
         627  +
            .expect("unable to make an HTTP request");
         628  +
        assert!(
         629  +
            receiver.recv().await.is_some(),
         630  +
            "we expected operation handler to be invoked but it was not entered"
         631  +
        );
         632  +
    }
         633  +
         634  +
    /// S3 clients should support the explicit virtual host
         635  +
    /// addressing style with Dualstack.
         636  +
    /// Test ID: S3VirtualHostDualstackAddressing
         637  +
    #[::tokio::test]
         638  +
    #[::tracing_test::traced_test]
         639  +
    #[should_panic]
         640  +
    async fn s3_virtual_host_dualstack_addressing_request() {
         641  +
        #[allow(unused_mut)]
         642  +
        let mut http_request = ::http::Request::builder()
         643  +
            .uri("/")
         644  +
            .method("GET")
         645  +
            .body(::aws_smithy_legacy_http_server::body::Body::from(
         646  +
                ::bytes::Bytes::copy_from_slice(&::aws_smithy_protocol_test::decode_body_data(
         647  +
                    "".as_bytes(),
         648  +
                    ::aws_smithy_protocol_test::MediaType::from("unknown"),
         649  +
                )),
         650  +
            ))
         651  +
            .unwrap();
         652  +
        *http_request.uri_mut() = "/?list-type=2".parse().unwrap();
         653  +
        todo!("endpoint trait not supported yet");
         654  +
        #[allow(unused_mut)]
         655  +
        let (sender, mut receiver) = ::tokio::sync::mpsc::channel(1);
         656  +
        let config = crate::service::AmazonS3Config::builder().build();
         657  +
        let service = crate::service::AmazonS3::builder::<::hyper::body::Body, _, _, _>(config)
         658  +
            .list_objects_v2(move |input: crate::input::ListObjectsV2Input| {
         659  +
                let sender = sender.clone();
         660  +
                async move {
         661  +
                    let result = {
         662  +
                        let expected = crate::input::ListObjectsV2Input {
         663  +
                            bucket: "mybucket".to_owned(),
         664  +
                            delimiter: ::std::option::Option::None,
         665  +
                            encoding_type: ::std::option::Option::None,
         666  +
                            max_keys: ::std::option::Option::None,
         667  +
                            prefix: ::std::option::Option::None,
         668  +
                            continuation_token: ::std::option::Option::None,
         669  +
                            fetch_owner: ::std::option::Option::None,
         670  +
                            start_after: ::std::option::Option::None,
         671  +
                            request_payer: ::std::option::Option::None,
         672  +
                            expected_bucket_owner: ::std::option::Option::None,
         673  +
                        };
         674  +
                        ::pretty_assertions::assert_eq!(input, expected);
         675  +
                        let output = crate::output::ListObjectsV2Output {
         676  +
                            is_truncated: ::std::option::Option::None,
         677  +
                            contents: ::std::option::Option::None,
         678  +
                            name: ::std::option::Option::None,
         679  +
                            prefix: ::std::option::Option::None,
         680  +
                            delimiter: ::std::option::Option::None,
         681  +
                            max_keys: ::std::option::Option::None,
         682  +
                            common_prefixes: ::std::option::Option::None,
         683  +
                            encoding_type: ::std::option::Option::None,
         684  +
                            key_count: ::std::option::Option::None,
         685  +
                            continuation_token: ::std::option::Option::None,
         686  +
                            next_continuation_token: ::std::option::Option::None,
         687  +
                            start_after: ::std::option::Option::None,
         688  +
                        };
         689  +
                        Ok(output)
         690  +
                    };
         691  +
                    sender.send(()).await.expect("receiver dropped early");
         692  +
                    result
         693  +
                }
         694  +
            })
         695  +
            .build_unchecked();
         696  +
        let http_response = ::tower::ServiceExt::oneshot(service, http_request)
         697  +
            .await
         698  +
            .expect("unable to make an HTTP request");
         699  +
        assert!(
         700  +
            receiver.recv().await.is_some(),
         701  +
            "we expected operation handler to be invoked but it was not entered"
         702  +
        );
         703  +
    }
         704  +
         705  +
    /// S3 clients should support the explicit virtual host
         706  +
    /// addressing style with S3 Accelerate.
         707  +
    /// Test ID: S3VirtualHostAccelerateAddressing
         708  +
    #[::tokio::test]
         709  +
    #[::tracing_test::traced_test]
         710  +
    #[should_panic]
         711  +
    async fn s3_virtual_host_accelerate_addressing_request() {
         712  +
        #[allow(unused_mut)]
         713  +
        let mut http_request = ::http::Request::builder()
         714  +
            .uri("/")
         715  +
            .method("GET")
         716  +
            .body(::aws_smithy_legacy_http_server::body::Body::from(
         717  +
                ::bytes::Bytes::copy_from_slice(&::aws_smithy_protocol_test::decode_body_data(
         718  +
                    "".as_bytes(),
         719  +
                    ::aws_smithy_protocol_test::MediaType::from("unknown"),
         720  +
                )),
         721  +
            ))
         722  +
            .unwrap();
         723  +
        *http_request.uri_mut() = "/?list-type=2".parse().unwrap();
         724  +
        todo!("endpoint trait not supported yet");
         725  +
        #[allow(unused_mut)]
         726  +
        let (sender, mut receiver) = ::tokio::sync::mpsc::channel(1);
         727  +
        let config = crate::service::AmazonS3Config::builder().build();
         728  +
        let service = crate::service::AmazonS3::builder::<::hyper::body::Body, _, _, _>(config)
         729  +
            .list_objects_v2(move |input: crate::input::ListObjectsV2Input| {
         730  +
                let sender = sender.clone();
         731  +
                async move {
         732  +
                    let result = {
         733  +
                        let expected = crate::input::ListObjectsV2Input {
         734  +
                            bucket: "mybucket".to_owned(),
         735  +
                            delimiter: ::std::option::Option::None,
         736  +
                            encoding_type: ::std::option::Option::None,
         737  +
                            max_keys: ::std::option::Option::None,
         738  +
                            prefix: ::std::option::Option::None,
         739  +
                            continuation_token: ::std::option::Option::None,
         740  +
                            fetch_owner: ::std::option::Option::None,
         741  +
                            start_after: ::std::option::Option::None,
         742  +
                            request_payer: ::std::option::Option::None,
         743  +
                            expected_bucket_owner: ::std::option::Option::None,
         744  +
                        };
         745  +
                        ::pretty_assertions::assert_eq!(input, expected);
         746  +
                        let output = crate::output::ListObjectsV2Output {
         747  +
                            is_truncated: ::std::option::Option::None,
         748  +
                            contents: ::std::option::Option::None,
         749  +
                            name: ::std::option::Option::None,
         750  +
                            prefix: ::std::option::Option::None,
         751  +
                            delimiter: ::std::option::Option::None,
         752  +
                            max_keys: ::std::option::Option::None,
         753  +
                            common_prefixes: ::std::option::Option::None,
         754  +
                            encoding_type: ::std::option::Option::None,
         755  +
                            key_count: ::std::option::Option::None,
         756  +
                            continuation_token: ::std::option::Option::None,
         757  +
                            next_continuation_token: ::std::option::Option::None,
         758  +
                            start_after: ::std::option::Option::None,
         759  +
                        };
         760  +
                        Ok(output)
         761  +
                    };
         762  +
                    sender.send(()).await.expect("receiver dropped early");
         763  +
                    result
         764  +
                }
         765  +
            })
         766  +
            .build_unchecked();
         767  +
        let http_response = ::tower::ServiceExt::oneshot(service, http_request)
         768  +
            .await
         769  +
            .expect("unable to make an HTTP request");
         770  +
        assert!(
         771  +
            receiver.recv().await.is_some(),
         772  +
            "we expected operation handler to be invoked but it was not entered"
         773  +
        );
         774  +
    }
         775  +
         776  +
    /// S3 clients should support the explicit virtual host
         777  +
    /// addressing style with Dualstack and S3 Accelerate.
         778  +
    /// Test ID: S3VirtualHostDualstackAccelerateAddressing
         779  +
    #[::tokio::test]
         780  +
    #[::tracing_test::traced_test]
         781  +
    #[should_panic]
         782  +
    async fn s3_virtual_host_dualstack_accelerate_addressing_request() {
         783  +
        #[allow(unused_mut)]
         784  +
        let mut http_request = ::http::Request::builder()
         785  +
            .uri("/")
         786  +
            .method("GET")
         787  +
            .body(::aws_smithy_legacy_http_server::body::Body::from(
         788  +
                ::bytes::Bytes::copy_from_slice(&::aws_smithy_protocol_test::decode_body_data(
         789  +
                    "".as_bytes(),
         790  +
                    ::aws_smithy_protocol_test::MediaType::from("unknown"),
         791  +
                )),
         792  +
            ))
         793  +
            .unwrap();
         794  +
        *http_request.uri_mut() = "/?list-type=2".parse().unwrap();
         795  +
        todo!("endpoint trait not supported yet");
         796  +
        #[allow(unused_mut)]
         797  +
        let (sender, mut receiver) = ::tokio::sync::mpsc::channel(1);
         798  +
        let config = crate::service::AmazonS3Config::builder().build();
         799  +
        let service = crate::service::AmazonS3::builder::<::hyper::body::Body, _, _, _>(config)
         800  +
            .list_objects_v2(move |input: crate::input::ListObjectsV2Input| {
         801  +
                let sender = sender.clone();
         802  +
                async move {
         803  +
                    let result = {
         804  +
                        let expected = crate::input::ListObjectsV2Input {
         805  +
                            bucket: "mybucket".to_owned(),
         806  +
                            delimiter: ::std::option::Option::None,
         807  +
                            encoding_type: ::std::option::Option::None,
         808  +
                            max_keys: ::std::option::Option::None,
         809  +
                            prefix: ::std::option::Option::None,
         810  +
                            continuation_token: ::std::option::Option::None,
         811  +
                            fetch_owner: ::std::option::Option::None,
         812  +
                            start_after: ::std::option::Option::None,
         813  +
                            request_payer: ::std::option::Option::None,
         814  +
                            expected_bucket_owner: ::std::option::Option::None,
         815  +
                        };
         816  +
                        ::pretty_assertions::assert_eq!(input, expected);
         817  +
                        let output = crate::output::ListObjectsV2Output {
         818  +
                            is_truncated: ::std::option::Option::None,
         819  +
                            contents: ::std::option::Option::None,
         820  +
                            name: ::std::option::Option::None,
         821  +
                            prefix: ::std::option::Option::None,
         822  +
                            delimiter: ::std::option::Option::None,
         823  +
                            max_keys: ::std::option::Option::None,
         824  +
                            common_prefixes: ::std::option::Option::None,
         825  +
                            encoding_type: ::std::option::Option::None,
         826  +
                            key_count: ::std::option::Option::None,
         827  +
                            continuation_token: ::std::option::Option::None,
         828  +
                            next_continuation_token: ::std::option::Option::None,
         829  +
                            start_after: ::std::option::Option::None,
         830  +
                        };
         831  +
                        Ok(output)
         832  +
                    };
         833  +
                    sender.send(()).await.expect("receiver dropped early");
         834  +
                    result
         835  +
                }
         836  +
            })
         837  +
            .build_unchecked();
         838  +
        let http_response = ::tower::ServiceExt::oneshot(service, http_request)
         839  +
            .await
         840  +
            .expect("unable to make an HTTP request");
         841  +
        assert!(
         842  +
            receiver.recv().await.is_some(),
         843  +
            "we expected operation handler to be invoked but it was not entered"
         844  +
        );
         845  +
    }
         846  +
         847  +
    /// S3 clients should resolve to the addressing style of the
         848  +
    /// operation if defined on both the client and operation.
         849  +
    /// Test ID: S3OperationAddressingPreferred
         850  +
    #[::tokio::test]
         851  +
    #[::tracing_test::traced_test]
         852  +
    #[should_panic]
         853  +
    async fn s3_operation_addressing_preferred_request() {
         854  +
        #[allow(unused_mut)]
         855  +
        let mut http_request = ::http::Request::builder()
         856  +
            .uri("/")
         857  +
            .method("GET")
         858  +
            .body(::aws_smithy_legacy_http_server::body::Body::from(
         859  +
                ::bytes::Bytes::copy_from_slice(&::aws_smithy_protocol_test::decode_body_data(
         860  +
                    "".as_bytes(),
         861  +
                    ::aws_smithy_protocol_test::MediaType::from("unknown"),
         862  +
                )),
         863  +
            ))
         864  +
            .unwrap();
         865  +
        *http_request.uri_mut() = "/?list-type=2".parse().unwrap();
         866  +
        todo!("endpoint trait not supported yet");
         867  +
        #[allow(unused_mut)]
         868  +
        let (sender, mut receiver) = ::tokio::sync::mpsc::channel(1);
         869  +
        let config = crate::service::AmazonS3Config::builder().build();
         870  +
        let service = crate::service::AmazonS3::builder::<::hyper::body::Body, _, _, _>(config)
         871  +
            .list_objects_v2(move |input: crate::input::ListObjectsV2Input| {
         872  +
                let sender = sender.clone();
         873  +
                async move {
         874  +
                    let result = {
         875  +
                        let expected = crate::input::ListObjectsV2Input {
         876  +
                            bucket: "mybucket".to_owned(),
         877  +
                            delimiter: ::std::option::Option::None,
         878  +
                            encoding_type: ::std::option::Option::None,
         879  +
                            max_keys: ::std::option::Option::None,
         880  +
                            prefix: ::std::option::Option::None,
         881  +
                            continuation_token: ::std::option::Option::None,
         882  +
                            fetch_owner: ::std::option::Option::None,
         883  +
                            start_after: ::std::option::Option::None,
         884  +
                            request_payer: ::std::option::Option::None,
         885  +
                            expected_bucket_owner: ::std::option::Option::None,
         886  +
                        };
         887  +
                        ::pretty_assertions::assert_eq!(input, expected);
         888  +
                        let output = crate::output::ListObjectsV2Output {
         889  +
                            is_truncated: ::std::option::Option::None,
         890  +
                            contents: ::std::option::Option::None,
         891  +
                            name: ::std::option::Option::None,
         892  +
                            prefix: ::std::option::Option::None,
         893  +
                            delimiter: ::std::option::Option::None,
         894  +
                            max_keys: ::std::option::Option::None,
         895  +
                            common_prefixes: ::std::option::Option::None,
         896  +
                            encoding_type: ::std::option::Option::None,
         897  +
                            key_count: ::std::option::Option::None,
         898  +
                            continuation_token: ::std::option::Option::None,
         899  +
                            next_continuation_token: ::std::option::Option::None,
         900  +
                            start_after: ::std::option::Option::None,
         901  +
                        };
         902  +
                        Ok(output)
         903  +
                    };
         904  +
                    sender.send(()).await.expect("receiver dropped early");
         905  +
                    result
         906  +
                }
         907  +
            })
         908  +
            .build_unchecked();
         909  +
        let http_response = ::tower::ServiceExt::oneshot(service, http_request)
         910  +
            .await
         911  +
            .expect("unable to make an HTTP request");
         912  +
        assert!(
         913  +
            receiver.recv().await.is_some(),
         914  +
            "we expected operation handler to be invoked but it was not entered"
         915  +
        );
         916  +
    }
         917  +
         918  +
    /// S3 operations return Error XML nodes unwrapped by
         919  +
    /// the ErrorResponse XML node.
         920  +
    ///
         921  +
    /// Test ID: S3OperationNoErrorWrappingResponse
         922  +
    #[::tokio::test]
         923  +
    #[::tracing_test::traced_test]
         924  +
    #[should_panic]
         925  +
    async fn s3_operation_no_error_wrapping_response_response() {
         926  +
        let output = crate::error::NoSuchBucket {};
         927  +
        let output = crate::error::ListObjectsV2Error::NoSuchBucket(output);
         928  +
        use ::aws_smithy_legacy_http_server::response::IntoResponse;
         929  +
        let http_response = output.into_response();
         930  +
        ::pretty_assertions::assert_eq!(
         931  +
            ::http::StatusCode::from_u16(400).expect("invalid expected HTTP status code"),
         932  +
            http_response.status()
         933  +
        );
         934  +
        let expected_headers = [("Content-Type", "application/xml")];
         935  +
        ::aws_smithy_protocol_test::assert_ok(::aws_smithy_protocol_test::validate_headers(
         936  +
            http_response.headers(),
         937  +
            expected_headers,
         938  +
        ));
         939  +
        let body = ::hyper::body::to_bytes(http_response.into_body())
         940  +
            .await
         941  +
            .expect("unable to extract body to bytes");
         942  +
        ::aws_smithy_protocol_test::assert_ok(
         943  +
        ::aws_smithy_protocol_test::validate_body(&body, "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<Error>\n\t<Type>Sender</Type>\n\t<Code>NoSuchBucket</Code>\n</Error>", ::aws_smithy_protocol_test::MediaType::from("application/xml"))
         944  +
        );
         945  +
    }
         946  +
}

tmp-codegen-diff/codegen-server-test/s3-http0x/rust-server-codegen/src/operation_shape.rs

@@ -0,1 +0,156 @@
           1  +
// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
           2  +
#[allow(missing_docs)] // documentation missing in model
           3  +
pub struct GetObject;
           4  +
           5  +
impl ::aws_smithy_legacy_http_server::operation::OperationShape for GetObject {
           6  +
    const ID: ::aws_smithy_legacy_http_server::shape_id::ShapeId =
           7  +
        ::aws_smithy_legacy_http_server::shape_id::ShapeId::new(
           8  +
            "com.amazonaws.s3#GetObject",
           9  +
            "com.amazonaws.s3",
          10  +
            "GetObject",
          11  +
        );
          12  +
          13  +
    type Input = crate::input::GetObjectInput;
          14  +
    type Output = crate::output::GetObjectOutput;
          15  +
    type Error = crate::error::GetObjectError;
          16  +
}
          17  +
          18  +
impl ::aws_smithy_legacy_http_server::instrumentation::sensitivity::Sensitivity for GetObject {
          19  +
    type RequestFmt = ::aws_smithy_legacy_http_server::instrumentation::sensitivity::RequestFmt<
          20  +
        ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
          21  +
        ::aws_smithy_legacy_http_server::instrumentation::sensitivity::uri::MakeUri<
          22  +
            ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
          23  +
            ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
          24  +
        >,
          25  +
    >;
          26  +
    type ResponseFmt = ::aws_smithy_legacy_http_server::instrumentation::sensitivity::ResponseFmt<
          27  +
        ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
          28  +
        ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
          29  +
    >;
          30  +
          31  +
    fn request_fmt() -> Self::RequestFmt {
          32  +
        ::aws_smithy_legacy_http_server::instrumentation::sensitivity::RequestFmt::new()
          33  +
    }
          34  +
          35  +
    fn response_fmt() -> Self::ResponseFmt {
          36  +
        ::aws_smithy_legacy_http_server::instrumentation::sensitivity::ResponseFmt::new()
          37  +
    }
          38  +
}
          39  +
          40  +
#[allow(missing_docs)] // documentation missing in model
          41  +
pub struct DeleteObjectTagging;
          42  +
          43  +
impl ::aws_smithy_legacy_http_server::operation::OperationShape for DeleteObjectTagging {
          44  +
    const ID: ::aws_smithy_legacy_http_server::shape_id::ShapeId =
          45  +
        ::aws_smithy_legacy_http_server::shape_id::ShapeId::new(
          46  +
            "com.amazonaws.s3#DeleteObjectTagging",
          47  +
            "com.amazonaws.s3",
          48  +
            "DeleteObjectTagging",
          49  +
        );
          50  +
          51  +
    type Input = crate::input::DeleteObjectTaggingInput;
          52  +
    type Output = crate::output::DeleteObjectTaggingOutput;
          53  +
    type Error = crate::error::DeleteObjectTaggingError;
          54  +
}
          55  +
          56  +
impl ::aws_smithy_legacy_http_server::instrumentation::sensitivity::Sensitivity
          57  +
    for DeleteObjectTagging
          58  +
{
          59  +
    type RequestFmt = ::aws_smithy_legacy_http_server::instrumentation::sensitivity::RequestFmt<
          60  +
        ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
          61  +
        ::aws_smithy_legacy_http_server::instrumentation::sensitivity::uri::MakeUri<
          62  +
            ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
          63  +
            ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
          64  +
        >,
          65  +
    >;
          66  +
    type ResponseFmt = ::aws_smithy_legacy_http_server::instrumentation::sensitivity::ResponseFmt<
          67  +
        ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
          68  +
        ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
          69  +
    >;
          70  +
          71  +
    fn request_fmt() -> Self::RequestFmt {
          72  +
        ::aws_smithy_legacy_http_server::instrumentation::sensitivity::RequestFmt::new()
          73  +
    }
          74  +
          75  +
    fn response_fmt() -> Self::ResponseFmt {
          76  +
        ::aws_smithy_legacy_http_server::instrumentation::sensitivity::ResponseFmt::new()
          77  +
    }
          78  +
}
          79  +
          80  +
#[allow(missing_docs)] // documentation missing in model
          81  +
pub struct GetBucketLocation;
          82  +
          83  +
impl ::aws_smithy_legacy_http_server::operation::OperationShape for GetBucketLocation {
          84  +
    const ID: ::aws_smithy_legacy_http_server::shape_id::ShapeId =
          85  +
        ::aws_smithy_legacy_http_server::shape_id::ShapeId::new(
          86  +
            "com.amazonaws.s3#GetBucketLocation",
          87  +
            "com.amazonaws.s3",
          88  +
            "GetBucketLocation",
          89  +
        );
          90  +
          91  +
    type Input = crate::input::GetBucketLocationInput;
          92  +
    type Output = crate::output::GetBucketLocationOutput;
          93  +
    type Error = crate::error::GetBucketLocationError;
          94  +
}
          95  +
          96  +
impl ::aws_smithy_legacy_http_server::instrumentation::sensitivity::Sensitivity
          97  +
    for GetBucketLocation
          98  +
{
          99  +
    type RequestFmt = ::aws_smithy_legacy_http_server::instrumentation::sensitivity::RequestFmt<
         100  +
        ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
         101  +
        ::aws_smithy_legacy_http_server::instrumentation::sensitivity::uri::MakeUri<
         102  +
            ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
         103  +
            ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
         104  +
        >,
         105  +
    >;
         106  +
    type ResponseFmt = ::aws_smithy_legacy_http_server::instrumentation::sensitivity::ResponseFmt<
         107  +
        ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
         108  +
        ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
         109  +
    >;
         110  +
         111  +
    fn request_fmt() -> Self::RequestFmt {
         112  +
        ::aws_smithy_legacy_http_server::instrumentation::sensitivity::RequestFmt::new()
         113  +
    }
         114  +
         115  +
    fn response_fmt() -> Self::ResponseFmt {
         116  +
        ::aws_smithy_legacy_http_server::instrumentation::sensitivity::ResponseFmt::new()
         117  +
    }
         118  +
}
         119  +
         120  +
#[allow(missing_docs)] // documentation missing in model
         121  +
pub struct ListObjectsV2;
         122  +
         123  +
impl ::aws_smithy_legacy_http_server::operation::OperationShape for ListObjectsV2 {
         124  +
    const ID: ::aws_smithy_legacy_http_server::shape_id::ShapeId =
         125  +
        ::aws_smithy_legacy_http_server::shape_id::ShapeId::new(
         126  +
            "com.amazonaws.s3#ListObjectsV2",
         127  +
            "com.amazonaws.s3",
         128  +
            "ListObjectsV2",
         129  +
        );
         130  +
         131  +
    type Input = crate::input::ListObjectsV2Input;
         132  +
    type Output = crate::output::ListObjectsV2Output;
         133  +
    type Error = crate::error::ListObjectsV2Error;
         134  +
}
         135  +
         136  +
impl ::aws_smithy_legacy_http_server::instrumentation::sensitivity::Sensitivity for ListObjectsV2 {
         137  +
    type RequestFmt = ::aws_smithy_legacy_http_server::instrumentation::sensitivity::RequestFmt<
         138  +
        ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
         139  +
        ::aws_smithy_legacy_http_server::instrumentation::sensitivity::uri::MakeUri<
         140  +
            ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
         141  +
            ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
         142  +
        >,
         143  +
    >;
         144  +
    type ResponseFmt = ::aws_smithy_legacy_http_server::instrumentation::sensitivity::ResponseFmt<
         145  +
        ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
         146  +
        ::aws_smithy_legacy_http_server::instrumentation::MakeIdentity,
         147  +
    >;
         148  +
         149  +
    fn request_fmt() -> Self::RequestFmt {
         150  +
        ::aws_smithy_legacy_http_server::instrumentation::sensitivity::RequestFmt::new()
         151  +
    }
         152  +
         153  +
    fn response_fmt() -> Self::ResponseFmt {
         154  +
        ::aws_smithy_legacy_http_server::instrumentation::sensitivity::ResponseFmt::new()
         155  +
    }
         156  +
}