AWS SDK

AWS SDK

rev. aa190e630077955f0bc8f58dee6a16530c1e0578 (ignoring whitespace)

Files changed:

tmp-codegen-diff/aws-sdk/sdk/ssm/src/types/_command_filter.rs

@@ -0,1 +0,549 @@
           1  +
// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
           2  +
           3  +
/// <p>Describes a command filter.</p><note>
           4  +
/// <p>A managed node ID can't be specified when a command status is <code>Pending</code> because the command hasn't run on the node yet.</p>
           5  +
/// </note>
           6  +
#[non_exhaustive]
           7  +
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::fmt::Debug)]
           8  +
pub struct CommandFilter {
           9  +
    /// <p>The name of the filter.</p><note>
          10  +
    /// <p>The <code>ExecutionStage</code> filter can't be used with the <code>ListCommandInvocations</code> operation, only with <code>ListCommands</code>.</p>
          11  +
    /// </note>
          12  +
    pub key: crate::types::CommandFilterKey,
          13  +
    /// <p>The filter value. Valid values for each filter key are as follows:</p>
          14  +
    /// <ul>
          15  +
    /// <li>
          16  +
    /// <p><b>InvokedAfter</b>: Specify a timestamp to limit your results. For example, specify <code>2024-07-07T00:00:00Z</code> to see a list of command executions occurring July 7, 2021, and later.</p></li>
          17  +
    /// <li>
          18  +
    /// <p><b>InvokedBefore</b>: Specify a timestamp to limit your results. For example, specify <code>2024-07-07T00:00:00Z</code> to see a list of command executions from before July 7, 2021.</p></li>
          19  +
    /// <li>
          20  +
    /// <p><b>Status</b>: Specify a valid command status to see a list of all command executions with that status. The status choices depend on the API you call.</p>
          21  +
    /// <p>The status values you can specify for <code>ListCommands</code> are:</p>
          22  +
    /// <ul>
          23  +
    /// <li>
          24  +
    /// <p><code>Pending</code></p></li>
          25  +
    /// <li>
          26  +
    /// <p><code>InProgress</code></p></li>
          27  +
    /// <li>
          28  +
    /// <p><code>Success</code></p></li>
          29  +
    /// <li>
          30  +
    /// <p><code>Cancelled</code></p></li>
          31  +
    /// <li>
          32  +
    /// <p><code>Failed</code></p></li>
          33  +
    /// <li>
          34  +
    /// <p><code>TimedOut</code> (this includes both Delivery and Execution time outs)</p></li>
          35  +
    /// <li>
          36  +
    /// <p><code>AccessDenied</code></p></li>
          37  +
    /// <li>
          38  +
    /// <p><code>DeliveryTimedOut</code></p></li>
          39  +
    /// <li>
          40  +
    /// <p><code>ExecutionTimedOut</code></p></li>
          41  +
    /// <li>
          42  +
    /// <p><code>Incomplete</code></p></li>
          43  +
    /// <li>
          44  +
    /// <p><code>NoInstancesInTag</code></p></li>
          45  +
    /// <li>
          46  +
    /// <p><code>LimitExceeded</code></p></li>
          47  +
    /// </ul>
          48  +
    /// <p>The status values you can specify for <code>ListCommandInvocations</code> are:</p>
          49  +
    /// <ul>
          50  +
    /// <li>
          51  +
    /// <p><code>Pending</code></p></li>
          52  +
    /// <li>
          53  +
    /// <p><code>InProgress</code></p></li>
          54  +
    /// <li>
          55  +
    /// <p><code>Delayed</code></p></li>
          56  +
    /// <li>
          57  +
    /// <p><code>Success</code></p></li>
          58  +
    /// <li>
          59  +
    /// <p><code>Cancelled</code></p></li>
          60  +
    /// <li>
          61  +
    /// <p><code>Failed</code></p></li>
          62  +
    /// <li>
          63  +
    /// <p><code>TimedOut</code> (this includes both Delivery and Execution time outs)</p></li>
          64  +
    /// <li>
          65  +
    /// <p><code>AccessDenied</code></p></li>
          66  +
    /// <li>
          67  +
    /// <p><code>DeliveryTimedOut</code></p></li>
          68  +
    /// <li>
          69  +
    /// <p><code>ExecutionTimedOut</code></p></li>
          70  +
    /// <li>
          71  +
    /// <p><code>Undeliverable</code></p></li>
          72  +
    /// <li>
          73  +
    /// <p><code>InvalidPlatform</code></p></li>
          74  +
    /// <li>
          75  +
    /// <p><code>Terminated</code></p></li>
          76  +
    /// </ul></li>
          77  +
    /// <li>
          78  +
    /// <p><b>DocumentName</b>: Specify name of the Amazon Web Services Systems Manager document (SSM document) for which you want to see command execution results. For example, specify <code>AWS-RunPatchBaseline</code> to see command executions that used this SSM document to perform security patching operations on managed nodes.</p></li>
          79  +
    /// <li>
          80  +
    /// <p><b>ExecutionStage</b>: Specify one of the following values (<code>ListCommands</code> operations only):</p>
          81  +
    /// <ul>
          82  +
    /// <li>
          83  +
    /// <p><code>Executing</code>: Returns a list of command executions that are currently still running.</p></li>
          84  +
    /// <li>
          85  +
    /// <p><code>Complete</code>: Returns a list of command executions that have already completed.</p></li>
          86  +
    /// </ul></li>
          87  +
    /// </ul>
          88  +
    pub value: ::std::string::String,
          89  +
}
          90  +
impl CommandFilter {
          91  +
    /// <p>The name of the filter.</p><note>
          92  +
    /// <p>The <code>ExecutionStage</code> filter can't be used with the <code>ListCommandInvocations</code> operation, only with <code>ListCommands</code>.</p>
          93  +
    /// </note>
          94  +
    pub fn key(&self) -> &crate::types::CommandFilterKey {
          95  +
        &self.key
          96  +
    }
          97  +
    /// <p>The filter value. Valid values for each filter key are as follows:</p>
          98  +
    /// <ul>
          99  +
    /// <li>
         100  +
    /// <p><b>InvokedAfter</b>: Specify a timestamp to limit your results. For example, specify <code>2024-07-07T00:00:00Z</code> to see a list of command executions occurring July 7, 2021, and later.</p></li>
         101  +
    /// <li>
         102  +
    /// <p><b>InvokedBefore</b>: Specify a timestamp to limit your results. For example, specify <code>2024-07-07T00:00:00Z</code> to see a list of command executions from before July 7, 2021.</p></li>
         103  +
    /// <li>
         104  +
    /// <p><b>Status</b>: Specify a valid command status to see a list of all command executions with that status. The status choices depend on the API you call.</p>
         105  +
    /// <p>The status values you can specify for <code>ListCommands</code> are:</p>
         106  +
    /// <ul>
         107  +
    /// <li>
         108  +
    /// <p><code>Pending</code></p></li>
         109  +
    /// <li>
         110  +
    /// <p><code>InProgress</code></p></li>
         111  +
    /// <li>
         112  +
    /// <p><code>Success</code></p></li>
         113  +
    /// <li>
         114  +
    /// <p><code>Cancelled</code></p></li>
         115  +
    /// <li>
         116  +
    /// <p><code>Failed</code></p></li>
         117  +
    /// <li>
         118  +
    /// <p><code>TimedOut</code> (this includes both Delivery and Execution time outs)</p></li>
         119  +
    /// <li>
         120  +
    /// <p><code>AccessDenied</code></p></li>
         121  +
    /// <li>
         122  +
    /// <p><code>DeliveryTimedOut</code></p></li>
         123  +
    /// <li>
         124  +
    /// <p><code>ExecutionTimedOut</code></p></li>
         125  +
    /// <li>
         126  +
    /// <p><code>Incomplete</code></p></li>
         127  +
    /// <li>
         128  +
    /// <p><code>NoInstancesInTag</code></p></li>
         129  +
    /// <li>
         130  +
    /// <p><code>LimitExceeded</code></p></li>
         131  +
    /// </ul>
         132  +
    /// <p>The status values you can specify for <code>ListCommandInvocations</code> are:</p>
         133  +
    /// <ul>
         134  +
    /// <li>
         135  +
    /// <p><code>Pending</code></p></li>
         136  +
    /// <li>
         137  +
    /// <p><code>InProgress</code></p></li>
         138  +
    /// <li>
         139  +
    /// <p><code>Delayed</code></p></li>
         140  +
    /// <li>
         141  +
    /// <p><code>Success</code></p></li>
         142  +
    /// <li>
         143  +
    /// <p><code>Cancelled</code></p></li>
         144  +
    /// <li>
         145  +
    /// <p><code>Failed</code></p></li>
         146  +
    /// <li>
         147  +
    /// <p><code>TimedOut</code> (this includes both Delivery and Execution time outs)</p></li>
         148  +
    /// <li>
         149  +
    /// <p><code>AccessDenied</code></p></li>
         150  +
    /// <li>
         151  +
    /// <p><code>DeliveryTimedOut</code></p></li>
         152  +
    /// <li>
         153  +
    /// <p><code>ExecutionTimedOut</code></p></li>
         154  +
    /// <li>
         155  +
    /// <p><code>Undeliverable</code></p></li>
         156  +
    /// <li>
         157  +
    /// <p><code>InvalidPlatform</code></p></li>
         158  +
    /// <li>
         159  +
    /// <p><code>Terminated</code></p></li>
         160  +
    /// </ul></li>
         161  +
    /// <li>
         162  +
    /// <p><b>DocumentName</b>: Specify name of the Amazon Web Services Systems Manager document (SSM document) for which you want to see command execution results. For example, specify <code>AWS-RunPatchBaseline</code> to see command executions that used this SSM document to perform security patching operations on managed nodes.</p></li>
         163  +
    /// <li>
         164  +
    /// <p><b>ExecutionStage</b>: Specify one of the following values (<code>ListCommands</code> operations only):</p>
         165  +
    /// <ul>
         166  +
    /// <li>
         167  +
    /// <p><code>Executing</code>: Returns a list of command executions that are currently still running.</p></li>
         168  +
    /// <li>
         169  +
    /// <p><code>Complete</code>: Returns a list of command executions that have already completed.</p></li>
         170  +
    /// </ul></li>
         171  +
    /// </ul>
         172  +
    pub fn value(&self) -> &str {
         173  +
        use std::ops::Deref;
         174  +
        self.value.deref()
         175  +
    }
         176  +
}
         177  +
static COMMANDFILTER_MEMBER_KEY: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         178  +
    ::aws_smithy_schema::ShapeId::from_parts("com.amazonaws.ssm#CommandFilter$key", "com.amazonaws.ssm", "CommandFilter"),
         179  +
    ::aws_smithy_schema::ShapeType::String,
         180  +
    "key",
         181  +
    0,
         182  +
);
         183  +
static COMMANDFILTER_MEMBER_VALUE: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         184  +
    ::aws_smithy_schema::ShapeId::from_parts("com.amazonaws.ssm#CommandFilter$value", "com.amazonaws.ssm", "CommandFilter"),
         185  +
    ::aws_smithy_schema::ShapeType::String,
         186  +
    "value",
         187  +
    1,
         188  +
);
         189  +
static COMMANDFILTER_SCHEMA: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_struct(
         190  +
    ::aws_smithy_schema::ShapeId::from_parts("com.amazonaws.ssm#CommandFilter", "com.amazonaws.ssm", "CommandFilter"),
         191  +
    ::aws_smithy_schema::ShapeType::Structure,
         192  +
    &[&COMMANDFILTER_MEMBER_KEY, &COMMANDFILTER_MEMBER_VALUE],
         193  +
);
         194  +
impl CommandFilter {
         195  +
    /// The schema for this shape.
         196  +
    pub const SCHEMA: &'static ::aws_smithy_schema::Schema<'static> = &COMMANDFILTER_SCHEMA;
         197  +
}
         198  +
impl ::aws_smithy_schema::serde::SerializableStruct for CommandFilter {
         199  +
    #[allow(unused_variables, clippy::diverging_sub_expression)]
         200  +
    fn serialize_members(
         201  +
        &self,
         202  +
        ser: &mut dyn ::aws_smithy_schema::serde::ShapeSerializer,
         203  +
    ) -> ::std::result::Result<(), ::aws_smithy_schema::serde::SerdeError> {
         204  +
        {
         205  +
            let val = &self.key;
         206  +
            ser.write_string(&COMMANDFILTER_MEMBER_KEY, val.as_str())?;
         207  +
        }
         208  +
        {
         209  +
            let val = &self.value;
         210  +
            ser.write_string(&COMMANDFILTER_MEMBER_VALUE, val)?;
         211  +
        }
         212  +
        Ok(())
         213  +
    }
         214  +
}
         215  +
impl CommandFilter {
         216  +
    /// Deserializes this structure from a [`ShapeDeserializer`].
         217  +
    pub fn deserialize(
         218  +
        deserializer: &mut dyn ::aws_smithy_schema::serde::ShapeDeserializer,
         219  +
    ) -> ::std::result::Result<Self, ::aws_smithy_schema::serde::SerdeError> {
         220  +
        #[allow(unused_variables, unused_mut)]
         221  +
        let mut builder = Self::builder();
         222  +
        #[allow(
         223  +
            unused_variables,
         224  +
            unreachable_code,
         225  +
            clippy::single_match,
         226  +
            clippy::match_single_binding,
         227  +
            clippy::diverging_sub_expression
         228  +
        )]
         229  +
        deserializer.read_struct(&COMMANDFILTER_SCHEMA, &mut |member, deser| {
         230  +
            match member.member_index() {
         231  +
                Some(0) => {
         232  +
                    builder.key = Some(crate::types::CommandFilterKey::from(deser.read_string(member)?.as_str()));
         233  +
                }
         234  +
                Some(1) => {
         235  +
                    builder.value = Some(deser.read_string(member)?);
         236  +
                }
         237  +
                _ => {}
         238  +
            }
         239  +
            Ok(())
         240  +
        })?;
         241  +
        builder.value = builder.value.or(Some(String::new()));
         242  +
        builder.build().map_err(|e| aws_smithy_schema::serde::SerdeError::custom(e.to_string()))
         243  +
    }
         244  +
}
         245  +
impl CommandFilter {
         246  +
    /// Deserializes this structure from a body deserializer and HTTP response.
         247  +
    pub fn deserialize_with_response(
         248  +
        deserializer: &mut dyn ::aws_smithy_schema::serde::ShapeDeserializer,
         249  +
        _headers: &::aws_smithy_runtime_api::http::Headers,
         250  +
        _status: u16,
         251  +
        _body: &[u8],
         252  +
    ) -> ::std::result::Result<Self, ::aws_smithy_schema::serde::SerdeError> {
         253  +
        Self::deserialize(deserializer)
         254  +
    }
         255  +
}
         256  +
impl CommandFilter {
         257  +
    /// Creates a new builder-style object to manufacture [`CommandFilter`](crate::types::CommandFilter).
         258  +
    pub fn builder() -> crate::types::builders::CommandFilterBuilder {
         259  +
        crate::types::builders::CommandFilterBuilder::default()
         260  +
    }
         261  +
}
         262  +
         263  +
/// A builder for [`CommandFilter`](crate::types::CommandFilter).
         264  +
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::default::Default, ::std::fmt::Debug)]
         265  +
#[non_exhaustive]
         266  +
pub struct CommandFilterBuilder {
         267  +
    pub(crate) key: ::std::option::Option<crate::types::CommandFilterKey>,
         268  +
    pub(crate) value: ::std::option::Option<::std::string::String>,
         269  +
}
         270  +
impl CommandFilterBuilder {
         271  +
    /// <p>The name of the filter.</p><note>
         272  +
    /// <p>The <code>ExecutionStage</code> filter can't be used with the <code>ListCommandInvocations</code> operation, only with <code>ListCommands</code>.</p>
         273  +
    /// </note>
         274  +
    /// This field is required.
         275  +
    pub fn key(mut self, input: crate::types::CommandFilterKey) -> Self {
         276  +
        self.key = ::std::option::Option::Some(input);
         277  +
        self
         278  +
    }
         279  +
    /// <p>The name of the filter.</p><note>
         280  +
    /// <p>The <code>ExecutionStage</code> filter can't be used with the <code>ListCommandInvocations</code> operation, only with <code>ListCommands</code>.</p>
         281  +
    /// </note>
         282  +
    pub fn set_key(mut self, input: ::std::option::Option<crate::types::CommandFilterKey>) -> Self {
         283  +
        self.key = input;
         284  +
        self
         285  +
    }
         286  +
    /// <p>The name of the filter.</p><note>
         287  +
    /// <p>The <code>ExecutionStage</code> filter can't be used with the <code>ListCommandInvocations</code> operation, only with <code>ListCommands</code>.</p>
         288  +
    /// </note>
         289  +
    pub fn get_key(&self) -> &::std::option::Option<crate::types::CommandFilterKey> {
         290  +
        &self.key
         291  +
    }
         292  +
    /// <p>The filter value. Valid values for each filter key are as follows:</p>
         293  +
    /// <ul>
         294  +
    /// <li>
         295  +
    /// <p><b>InvokedAfter</b>: Specify a timestamp to limit your results. For example, specify <code>2024-07-07T00:00:00Z</code> to see a list of command executions occurring July 7, 2021, and later.</p></li>
         296  +
    /// <li>
         297  +
    /// <p><b>InvokedBefore</b>: Specify a timestamp to limit your results. For example, specify <code>2024-07-07T00:00:00Z</code> to see a list of command executions from before July 7, 2021.</p></li>
         298  +
    /// <li>
         299  +
    /// <p><b>Status</b>: Specify a valid command status to see a list of all command executions with that status. The status choices depend on the API you call.</p>
         300  +
    /// <p>The status values you can specify for <code>ListCommands</code> are:</p>
         301  +
    /// <ul>
         302  +
    /// <li>
         303  +
    /// <p><code>Pending</code></p></li>
         304  +
    /// <li>
         305  +
    /// <p><code>InProgress</code></p></li>
         306  +
    /// <li>
         307  +
    /// <p><code>Success</code></p></li>
         308  +
    /// <li>
         309  +
    /// <p><code>Cancelled</code></p></li>
         310  +
    /// <li>
         311  +
    /// <p><code>Failed</code></p></li>
         312  +
    /// <li>
         313  +
    /// <p><code>TimedOut</code> (this includes both Delivery and Execution time outs)</p></li>
         314  +
    /// <li>
         315  +
    /// <p><code>AccessDenied</code></p></li>
         316  +
    /// <li>
         317  +
    /// <p><code>DeliveryTimedOut</code></p></li>
         318  +
    /// <li>
         319  +
    /// <p><code>ExecutionTimedOut</code></p></li>
         320  +
    /// <li>
         321  +
    /// <p><code>Incomplete</code></p></li>
         322  +
    /// <li>
         323  +
    /// <p><code>NoInstancesInTag</code></p></li>
         324  +
    /// <li>
         325  +
    /// <p><code>LimitExceeded</code></p></li>
         326  +
    /// </ul>
         327  +
    /// <p>The status values you can specify for <code>ListCommandInvocations</code> are:</p>
         328  +
    /// <ul>
         329  +
    /// <li>
         330  +
    /// <p><code>Pending</code></p></li>
         331  +
    /// <li>
         332  +
    /// <p><code>InProgress</code></p></li>
         333  +
    /// <li>
         334  +
    /// <p><code>Delayed</code></p></li>
         335  +
    /// <li>
         336  +
    /// <p><code>Success</code></p></li>
         337  +
    /// <li>
         338  +
    /// <p><code>Cancelled</code></p></li>
         339  +
    /// <li>
         340  +
    /// <p><code>Failed</code></p></li>
         341  +
    /// <li>
         342  +
    /// <p><code>TimedOut</code> (this includes both Delivery and Execution time outs)</p></li>
         343  +
    /// <li>
         344  +
    /// <p><code>AccessDenied</code></p></li>
         345  +
    /// <li>
         346  +
    /// <p><code>DeliveryTimedOut</code></p></li>
         347  +
    /// <li>
         348  +
    /// <p><code>ExecutionTimedOut</code></p></li>
         349  +
    /// <li>
         350  +
    /// <p><code>Undeliverable</code></p></li>
         351  +
    /// <li>
         352  +
    /// <p><code>InvalidPlatform</code></p></li>
         353  +
    /// <li>
         354  +
    /// <p><code>Terminated</code></p></li>
         355  +
    /// </ul></li>
         356  +
    /// <li>
         357  +
    /// <p><b>DocumentName</b>: Specify name of the Amazon Web Services Systems Manager document (SSM document) for which you want to see command execution results. For example, specify <code>AWS-RunPatchBaseline</code> to see command executions that used this SSM document to perform security patching operations on managed nodes.</p></li>
         358  +
    /// <li>
         359  +
    /// <p><b>ExecutionStage</b>: Specify one of the following values (<code>ListCommands</code> operations only):</p>
         360  +
    /// <ul>
         361  +
    /// <li>
         362  +
    /// <p><code>Executing</code>: Returns a list of command executions that are currently still running.</p></li>
         363  +
    /// <li>
         364  +
    /// <p><code>Complete</code>: Returns a list of command executions that have already completed.</p></li>
         365  +
    /// </ul></li>
         366  +
    /// </ul>
         367  +
    /// This field is required.
         368  +
    pub fn value(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
         369  +
        self.value = ::std::option::Option::Some(input.into());
         370  +
        self
         371  +
    }
         372  +
    /// <p>The filter value. Valid values for each filter key are as follows:</p>
         373  +
    /// <ul>
         374  +
    /// <li>
         375  +
    /// <p><b>InvokedAfter</b>: Specify a timestamp to limit your results. For example, specify <code>2024-07-07T00:00:00Z</code> to see a list of command executions occurring July 7, 2021, and later.</p></li>
         376  +
    /// <li>
         377  +
    /// <p><b>InvokedBefore</b>: Specify a timestamp to limit your results. For example, specify <code>2024-07-07T00:00:00Z</code> to see a list of command executions from before July 7, 2021.</p></li>
         378  +
    /// <li>
         379  +
    /// <p><b>Status</b>: Specify a valid command status to see a list of all command executions with that status. The status choices depend on the API you call.</p>
         380  +
    /// <p>The status values you can specify for <code>ListCommands</code> are:</p>
         381  +
    /// <ul>
         382  +
    /// <li>
         383  +
    /// <p><code>Pending</code></p></li>
         384  +
    /// <li>
         385  +
    /// <p><code>InProgress</code></p></li>
         386  +
    /// <li>
         387  +
    /// <p><code>Success</code></p></li>
         388  +
    /// <li>
         389  +
    /// <p><code>Cancelled</code></p></li>
         390  +
    /// <li>
         391  +
    /// <p><code>Failed</code></p></li>
         392  +
    /// <li>
         393  +
    /// <p><code>TimedOut</code> (this includes both Delivery and Execution time outs)</p></li>
         394  +
    /// <li>
         395  +
    /// <p><code>AccessDenied</code></p></li>
         396  +
    /// <li>
         397  +
    /// <p><code>DeliveryTimedOut</code></p></li>
         398  +
    /// <li>
         399  +
    /// <p><code>ExecutionTimedOut</code></p></li>
         400  +
    /// <li>
         401  +
    /// <p><code>Incomplete</code></p></li>
         402  +
    /// <li>
         403  +
    /// <p><code>NoInstancesInTag</code></p></li>
         404  +
    /// <li>
         405  +
    /// <p><code>LimitExceeded</code></p></li>
         406  +
    /// </ul>
         407  +
    /// <p>The status values you can specify for <code>ListCommandInvocations</code> are:</p>
         408  +
    /// <ul>
         409  +
    /// <li>
         410  +
    /// <p><code>Pending</code></p></li>
         411  +
    /// <li>
         412  +
    /// <p><code>InProgress</code></p></li>
         413  +
    /// <li>
         414  +
    /// <p><code>Delayed</code></p></li>
         415  +
    /// <li>
         416  +
    /// <p><code>Success</code></p></li>
         417  +
    /// <li>
         418  +
    /// <p><code>Cancelled</code></p></li>
         419  +
    /// <li>
         420  +
    /// <p><code>Failed</code></p></li>
         421  +
    /// <li>
         422  +
    /// <p><code>TimedOut</code> (this includes both Delivery and Execution time outs)</p></li>
         423  +
    /// <li>
         424  +
    /// <p><code>AccessDenied</code></p></li>
         425  +
    /// <li>
         426  +
    /// <p><code>DeliveryTimedOut</code></p></li>
         427  +
    /// <li>
         428  +
    /// <p><code>ExecutionTimedOut</code></p></li>
         429  +
    /// <li>
         430  +
    /// <p><code>Undeliverable</code></p></li>
         431  +
    /// <li>
         432  +
    /// <p><code>InvalidPlatform</code></p></li>
         433  +
    /// <li>
         434  +
    /// <p><code>Terminated</code></p></li>
         435  +
    /// </ul></li>
         436  +
    /// <li>
         437  +
    /// <p><b>DocumentName</b>: Specify name of the Amazon Web Services Systems Manager document (SSM document) for which you want to see command execution results. For example, specify <code>AWS-RunPatchBaseline</code> to see command executions that used this SSM document to perform security patching operations on managed nodes.</p></li>
         438  +
    /// <li>
         439  +
    /// <p><b>ExecutionStage</b>: Specify one of the following values (<code>ListCommands</code> operations only):</p>
         440  +
    /// <ul>
         441  +
    /// <li>
         442  +
    /// <p><code>Executing</code>: Returns a list of command executions that are currently still running.</p></li>
         443  +
    /// <li>
         444  +
    /// <p><code>Complete</code>: Returns a list of command executions that have already completed.</p></li>
         445  +
    /// </ul></li>
         446  +
    /// </ul>
         447  +
    pub fn set_value(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
         448  +
        self.value = input;
         449  +
        self
         450  +
    }
         451  +
    /// <p>The filter value. Valid values for each filter key are as follows:</p>
         452  +
    /// <ul>
         453  +
    /// <li>
         454  +
    /// <p><b>InvokedAfter</b>: Specify a timestamp to limit your results. For example, specify <code>2024-07-07T00:00:00Z</code> to see a list of command executions occurring July 7, 2021, and later.</p></li>
         455  +
    /// <li>
         456  +
    /// <p><b>InvokedBefore</b>: Specify a timestamp to limit your results. For example, specify <code>2024-07-07T00:00:00Z</code> to see a list of command executions from before July 7, 2021.</p></li>
         457  +
    /// <li>
         458  +
    /// <p><b>Status</b>: Specify a valid command status to see a list of all command executions with that status. The status choices depend on the API you call.</p>
         459  +
    /// <p>The status values you can specify for <code>ListCommands</code> are:</p>
         460  +
    /// <ul>
         461  +
    /// <li>
         462  +
    /// <p><code>Pending</code></p></li>
         463  +
    /// <li>
         464  +
    /// <p><code>InProgress</code></p></li>
         465  +
    /// <li>
         466  +
    /// <p><code>Success</code></p></li>
         467  +
    /// <li>
         468  +
    /// <p><code>Cancelled</code></p></li>
         469  +
    /// <li>
         470  +
    /// <p><code>Failed</code></p></li>
         471  +
    /// <li>
         472  +
    /// <p><code>TimedOut</code> (this includes both Delivery and Execution time outs)</p></li>
         473  +
    /// <li>
         474  +
    /// <p><code>AccessDenied</code></p></li>
         475  +
    /// <li>
         476  +
    /// <p><code>DeliveryTimedOut</code></p></li>
         477  +
    /// <li>
         478  +
    /// <p><code>ExecutionTimedOut</code></p></li>
         479  +
    /// <li>
         480  +
    /// <p><code>Incomplete</code></p></li>
         481  +
    /// <li>
         482  +
    /// <p><code>NoInstancesInTag</code></p></li>
         483  +
    /// <li>
         484  +
    /// <p><code>LimitExceeded</code></p></li>
         485  +
    /// </ul>
         486  +
    /// <p>The status values you can specify for <code>ListCommandInvocations</code> are:</p>
         487  +
    /// <ul>
         488  +
    /// <li>
         489  +
    /// <p><code>Pending</code></p></li>
         490  +
    /// <li>
         491  +
    /// <p><code>InProgress</code></p></li>
         492  +
    /// <li>
         493  +
    /// <p><code>Delayed</code></p></li>
         494  +
    /// <li>
         495  +
    /// <p><code>Success</code></p></li>
         496  +
    /// <li>
         497  +
    /// <p><code>Cancelled</code></p></li>
         498  +
    /// <li>
         499  +
    /// <p><code>Failed</code></p></li>
         500  +
    /// <li>
         501  +
    /// <p><code>TimedOut</code> (this includes both Delivery and Execution time outs)</p></li>
         502  +
    /// <li>
         503  +
    /// <p><code>AccessDenied</code></p></li>
         504  +
    /// <li>
         505  +
    /// <p><code>DeliveryTimedOut</code></p></li>
         506  +
    /// <li>
         507  +
    /// <p><code>ExecutionTimedOut</code></p></li>
         508  +
    /// <li>
         509  +
    /// <p><code>Undeliverable</code></p></li>
         510  +
    /// <li>
         511  +
    /// <p><code>InvalidPlatform</code></p></li>
         512  +
    /// <li>
         513  +
    /// <p><code>Terminated</code></p></li>
         514  +
    /// </ul></li>
         515  +
    /// <li>
         516  +
    /// <p><b>DocumentName</b>: Specify name of the Amazon Web Services Systems Manager document (SSM document) for which you want to see command execution results. For example, specify <code>AWS-RunPatchBaseline</code> to see command executions that used this SSM document to perform security patching operations on managed nodes.</p></li>
         517  +
    /// <li>
         518  +
    /// <p><b>ExecutionStage</b>: Specify one of the following values (<code>ListCommands</code> operations only):</p>
         519  +
    /// <ul>
         520  +
    /// <li>
         521  +
    /// <p><code>Executing</code>: Returns a list of command executions that are currently still running.</p></li>
         522  +
    /// <li>
         523  +
    /// <p><code>Complete</code>: Returns a list of command executions that have already completed.</p></li>
         524  +
    /// </ul></li>
         525  +
    /// </ul>
         526  +
    pub fn get_value(&self) -> &::std::option::Option<::std::string::String> {
         527  +
        &self.value
         528  +
    }
         529  +
    /// Consumes the builder and constructs a [`CommandFilter`](crate::types::CommandFilter).
         530  +
    /// This method will fail if any of the following fields are not set:
         531  +
    /// - [`key`](crate::types::builders::CommandFilterBuilder::key)
         532  +
    /// - [`value`](crate::types::builders::CommandFilterBuilder::value)
         533  +
    pub fn build(self) -> ::std::result::Result<crate::types::CommandFilter, ::aws_smithy_types::error::operation::BuildError> {
         534  +
        ::std::result::Result::Ok(crate::types::CommandFilter {
         535  +
            key: self.key.ok_or_else(|| {
         536  +
                ::aws_smithy_types::error::operation::BuildError::missing_field(
         537  +
                    "key",
         538  +
                    "key was not specified but it is required when building CommandFilter",
         539  +
                )
         540  +
            })?,
         541  +
            value: self.value.ok_or_else(|| {
         542  +
                ::aws_smithy_types::error::operation::BuildError::missing_field(
         543  +
                    "value",
         544  +
                    "value was not specified but it is required when building CommandFilter",
         545  +
                )
         546  +
            })?,
         547  +
        })
         548  +
    }
         549  +
}

tmp-codegen-diff/aws-sdk/sdk/ssm/src/types/_command_filter_key.rs

@@ -0,1 +0,126 @@
           1  +
// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
           2  +
           3  +
/// When writing a match expression against `CommandFilterKey`, it is important to ensure
           4  +
/// your code is forward-compatible. That is, if a match arm handles a case for a
           5  +
/// feature that is supported by the service but has not been represented as an enum
           6  +
/// variant in a current version of SDK, your code should continue to work when you
           7  +
/// upgrade SDK to a future version in which the enum does include a variant for that
           8  +
/// feature.
           9  +
///
          10  +
/// Here is an example of how you can make a match expression forward-compatible:
          11  +
///
          12  +
/// ```text
          13  +
/// # let commandfilterkey = unimplemented!();
          14  +
/// match commandfilterkey {
          15  +
///     CommandFilterKey::DocumentName => { /* ... */ },
          16  +
///     CommandFilterKey::ExecutionStage => { /* ... */ },
          17  +
///     CommandFilterKey::InvokedAfter => { /* ... */ },
          18  +
///     CommandFilterKey::InvokedBefore => { /* ... */ },
          19  +
///     CommandFilterKey::Status => { /* ... */ },
          20  +
///     other @ _ if other.as_str() == "NewFeature" => { /* handles a case for `NewFeature` */ },
          21  +
///     _ => { /* ... */ },
          22  +
/// }
          23  +
/// ```
          24  +
/// The above code demonstrates that when `commandfilterkey` represents
          25  +
/// `NewFeature`, the execution path will lead to the second last match arm,
          26  +
/// even though the enum does not contain a variant `CommandFilterKey::NewFeature`
          27  +
/// in the current version of SDK. The reason is that the variable `other`,
          28  +
/// created by the `@` operator, is bound to
          29  +
/// `CommandFilterKey::Unknown(UnknownVariantValue("NewFeature".to_owned()))`
          30  +
/// and calling `as_str` on it yields `"NewFeature"`.
          31  +
/// This match expression is forward-compatible when executed with a newer
          32  +
/// version of SDK where the variant `CommandFilterKey::NewFeature` is defined.
          33  +
/// Specifically, when `commandfilterkey` represents `NewFeature`,
          34  +
/// the execution path will hit the second last match arm as before by virtue of
          35  +
/// calling `as_str` on `CommandFilterKey::NewFeature` also yielding `"NewFeature"`.
          36  +
///
          37  +
/// Explicitly matching on the `Unknown` variant should
          38  +
/// be avoided for two reasons:
          39  +
/// - The inner data `UnknownVariantValue` is opaque, and no further information can be extracted.
          40  +
/// - It might inadvertently shadow other intended match arms.
          41  +
///
          42  +
#[allow(missing_docs)] // documentation missing in model
          43  +
#[non_exhaustive]
          44  +
#[derive(
          45  +
    ::std::clone::Clone, ::std::cmp::Eq, ::std::cmp::Ord, ::std::cmp::PartialEq, ::std::cmp::PartialOrd, ::std::fmt::Debug, ::std::hash::Hash,
          46  +
)]
          47  +
pub enum CommandFilterKey {
          48  +
    #[allow(missing_docs)] // documentation missing in model
          49  +
    DocumentName,
          50  +
    #[allow(missing_docs)] // documentation missing in model
          51  +
    ExecutionStage,
          52  +
    #[allow(missing_docs)] // documentation missing in model
          53  +
    InvokedAfter,
          54  +
    #[allow(missing_docs)] // documentation missing in model
          55  +
    InvokedBefore,
          56  +
    #[allow(missing_docs)] // documentation missing in model
          57  +
    Status,
          58  +
    /// `Unknown` contains new variants that have been added since this code was generated.
          59  +
    #[deprecated(note = "Don't directly match on `Unknown`. See the docs on this enum for the correct way to handle unknown variants.")]
          60  +
    Unknown(crate::primitives::sealed_enum_unknown::UnknownVariantValue),
          61  +
}
          62  +
impl ::std::convert::From<&str> for CommandFilterKey {
          63  +
    fn from(s: &str) -> Self {
          64  +
        match s {
          65  +
            "DocumentName" => CommandFilterKey::DocumentName,
          66  +
            "ExecutionStage" => CommandFilterKey::ExecutionStage,
          67  +
            "InvokedAfter" => CommandFilterKey::InvokedAfter,
          68  +
            "InvokedBefore" => CommandFilterKey::InvokedBefore,
          69  +
            "Status" => CommandFilterKey::Status,
          70  +
            other => CommandFilterKey::Unknown(crate::primitives::sealed_enum_unknown::UnknownVariantValue(other.to_owned())),
          71  +
        }
          72  +
    }
          73  +
}
          74  +
impl ::std::str::FromStr for CommandFilterKey {
          75  +
    type Err = ::std::convert::Infallible;
          76  +
          77  +
    fn from_str(s: &str) -> ::std::result::Result<Self, <Self as ::std::str::FromStr>::Err> {
          78  +
        ::std::result::Result::Ok(CommandFilterKey::from(s))
          79  +
    }
          80  +
}
          81  +
impl CommandFilterKey {
          82  +
    /// Returns the `&str` value of the enum member.
          83  +
    pub fn as_str(&self) -> &str {
          84  +
        match self {
          85  +
            CommandFilterKey::DocumentName => "DocumentName",
          86  +
            CommandFilterKey::ExecutionStage => "ExecutionStage",
          87  +
            CommandFilterKey::InvokedAfter => "InvokedAfter",
          88  +
            CommandFilterKey::InvokedBefore => "InvokedBefore",
          89  +
            CommandFilterKey::Status => "Status",
          90  +
            CommandFilterKey::Unknown(value) => value.as_str(),
          91  +
        }
          92  +
    }
          93  +
    /// Returns all the `&str` representations of the enum members.
          94  +
    pub const fn values() -> &'static [&'static str] {
          95  +
        &["DocumentName", "ExecutionStage", "InvokedAfter", "InvokedBefore", "Status"]
          96  +
    }
          97  +
}
          98  +
impl ::std::convert::AsRef<str> for CommandFilterKey {
          99  +
    fn as_ref(&self) -> &str {
         100  +
        self.as_str()
         101  +
    }
         102  +
}
         103  +
impl CommandFilterKey {
         104  +
    /// Parses the enum value while disallowing unknown variants.
         105  +
    ///
         106  +
    /// Unknown variants will result in an error.
         107  +
    pub fn try_parse(value: &str) -> ::std::result::Result<Self, crate::error::UnknownVariantError> {
         108  +
        match Self::from(value) {
         109  +
            #[allow(deprecated)]
         110  +
            Self::Unknown(_) => ::std::result::Result::Err(crate::error::UnknownVariantError::new(value)),
         111  +
            known => Ok(known),
         112  +
        }
         113  +
    }
         114  +
}
         115  +
impl ::std::fmt::Display for CommandFilterKey {
         116  +
    fn fmt(&self, f: &mut ::std::fmt::Formatter) -> ::std::fmt::Result {
         117  +
        match self {
         118  +
            CommandFilterKey::DocumentName => write!(f, "DocumentName"),
         119  +
            CommandFilterKey::ExecutionStage => write!(f, "ExecutionStage"),
         120  +
            CommandFilterKey::InvokedAfter => write!(f, "InvokedAfter"),
         121  +
            CommandFilterKey::InvokedBefore => write!(f, "InvokedBefore"),
         122  +
            CommandFilterKey::Status => write!(f, "Status"),
         123  +
            CommandFilterKey::Unknown(value) => write!(f, "{value}"),
         124  +
        }
         125  +
    }
         126  +
}

tmp-codegen-diff/aws-sdk/sdk/ssm/src/types/_command_invocation.rs

@@ -0,1 +0,893 @@
           1  +
// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
           2  +
           3  +
/// <p>An invocation is a copy of a command sent to a specific managed node. A command can apply to one or more managed nodes. A command invocation applies to one managed node. For example, if a user runs <code>SendCommand</code> against three managed nodes, then a command invocation is created for each requested managed node ID. A command invocation returns status and detail information about a command you ran.</p>
           4  +
#[non_exhaustive]
           5  +
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::fmt::Debug)]
           6  +
pub struct CommandInvocation {
           7  +
    /// <p>The command against which this invocation was requested.</p>
           8  +
    pub command_id: ::std::option::Option<::std::string::String>,
           9  +
    /// <p>The managed node ID in which this invocation was requested.</p>
          10  +
    pub instance_id: ::std::option::Option<::std::string::String>,
          11  +
    /// <p>The fully qualified host name of the managed node.</p>
          12  +
    pub instance_name: ::std::option::Option<::std::string::String>,
          13  +
    /// <p>User-specified information about the command, such as a brief description of what the command should do.</p>
          14  +
    pub comment: ::std::option::Option<::std::string::String>,
          15  +
    /// <p>The document name that was requested for execution.</p>
          16  +
    pub document_name: ::std::option::Option<::std::string::String>,
          17  +
    /// <p>The Systems Manager document (SSM document) version.</p>
          18  +
    pub document_version: ::std::option::Option<::std::string::String>,
          19  +
    /// <p>The time and date the request was sent to this managed node.</p>
          20  +
    pub requested_date_time: ::std::option::Option<::aws_smithy_types::DateTime>,
          21  +
    /// <p>Whether or not the invocation succeeded, failed, or is pending.</p>
          22  +
    pub status: ::std::option::Option<crate::types::CommandInvocationStatus>,
          23  +
    /// <p>A detailed status of the command execution for each invocation (each managed node targeted by the command). StatusDetails includes more information than Status because it includes states resulting from error and concurrency control parameters. StatusDetails can show different results than Status. For more information about these statuses, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/monitor-commands.html">Understanding command statuses</a> in the <i>Amazon Web Services Systems Manager User Guide</i>. StatusDetails can be one of the following values:</p>
          24  +
    /// <ul>
          25  +
    /// <li>
          26  +
    /// <p>Pending: The command hasn't been sent to the managed node.</p></li>
          27  +
    /// <li>
          28  +
    /// <p>In Progress: The command has been sent to the managed node but hasn't reached a terminal state.</p></li>
          29  +
    /// <li>
          30  +
    /// <p>Success: The execution of the command or plugin was successfully completed. This is a terminal state.</p></li>
          31  +
    /// <li>
          32  +
    /// <p>Delivery Timed Out: The command wasn't delivered to the managed node before the delivery timeout expired. Delivery timeouts don't count against the parent command's <code>MaxErrors</code> limit, but they do contribute to whether the parent command status is Success or Incomplete. This is a terminal state.</p></li>
          33  +
    /// <li>
          34  +
    /// <p>Execution Timed Out: Command execution started on the managed node, but the execution wasn't complete before the execution timeout expired. Execution timeouts count against the <code>MaxErrors</code> limit of the parent command. This is a terminal state.</p></li>
          35  +
    /// <li>
          36  +
    /// <p>Failed: The command wasn't successful on the managed node. For a plugin, this indicates that the result code wasn't zero. For a command invocation, this indicates that the result code for one or more plugins wasn't zero. Invocation failures count against the <code>MaxErrors</code> limit of the parent command. This is a terminal state.</p></li>
          37  +
    /// <li>
          38  +
    /// <p>Cancelled: The command was terminated before it was completed. This is a terminal state.</p></li>
          39  +
    /// <li>
          40  +
    /// <p>Undeliverable: The command can't be delivered to the managed node. The managed node might not exist or might not be responding. Undeliverable invocations don't count against the parent command's MaxErrors limit and don't contribute to whether the parent command status is Success or Incomplete. This is a terminal state.</p></li>
          41  +
    /// <li>
          42  +
    /// <p>Terminated: The parent command exceeded its MaxErrors limit and subsequent command invocations were canceled by the system. This is a terminal state.</p></li>
          43  +
    /// <li>
          44  +
    /// <p>Delayed: The system attempted to send the command to the managed node but wasn't successful. The system retries again.</p></li>
          45  +
    /// </ul>
          46  +
    pub status_details: ::std::option::Option<::std::string::String>,
          47  +
    /// <p>Gets the trace output sent by the agent.</p>
          48  +
    pub trace_output: ::std::option::Option<::std::string::String>,
          49  +
    /// <p>The URL to the plugin's StdOut file in Amazon Simple Storage Service (Amazon S3), if the S3 bucket was defined for the parent command. For an invocation, <code>StandardOutputUrl</code> is populated if there is just one plugin defined for the command, and the S3 bucket was defined for the command.</p>
          50  +
    pub standard_output_url: ::std::option::Option<::std::string::String>,
          51  +
    /// <p>The URL to the plugin's StdErr file in Amazon Simple Storage Service (Amazon S3), if the S3 bucket was defined for the parent command. For an invocation, <code>StandardErrorUrl</code> is populated if there is just one plugin defined for the command, and the S3 bucket was defined for the command.</p>
          52  +
    pub standard_error_url: ::std::option::Option<::std::string::String>,
          53  +
    /// <p>Plugins processed by the command.</p>
          54  +
    pub command_plugins: ::std::option::Option<::std::vec::Vec<crate::types::CommandPlugin>>,
          55  +
    /// <p>The Identity and Access Management (IAM) service role that Run Command, a tool in Amazon Web Services Systems Manager, uses to act on your behalf when sending notifications about command status changes on a per managed node basis.</p>
          56  +
    pub service_role: ::std::option::Option<::std::string::String>,
          57  +
    /// <p>Configurations for sending notifications about command status changes on a per managed node basis.</p>
          58  +
    pub notification_config: ::std::option::Option<crate::types::NotificationConfig>,
          59  +
    /// <p>Amazon CloudWatch Logs information where you want Amazon Web Services Systems Manager to send the command output.</p>
          60  +
    pub cloud_watch_output_config: ::std::option::Option<crate::types::CloudWatchOutputConfig>,
          61  +
}
          62  +
impl CommandInvocation {
          63  +
    /// <p>The command against which this invocation was requested.</p>
          64  +
    pub fn command_id(&self) -> ::std::option::Option<&str> {
          65  +
        self.command_id.as_deref()
          66  +
    }
          67  +
    /// <p>The managed node ID in which this invocation was requested.</p>
          68  +
    pub fn instance_id(&self) -> ::std::option::Option<&str> {
          69  +
        self.instance_id.as_deref()
          70  +
    }
          71  +
    /// <p>The fully qualified host name of the managed node.</p>
          72  +
    pub fn instance_name(&self) -> ::std::option::Option<&str> {
          73  +
        self.instance_name.as_deref()
          74  +
    }
          75  +
    /// <p>User-specified information about the command, such as a brief description of what the command should do.</p>
          76  +
    pub fn comment(&self) -> ::std::option::Option<&str> {
          77  +
        self.comment.as_deref()
          78  +
    }
          79  +
    /// <p>The document name that was requested for execution.</p>
          80  +
    pub fn document_name(&self) -> ::std::option::Option<&str> {
          81  +
        self.document_name.as_deref()
          82  +
    }
          83  +
    /// <p>The Systems Manager document (SSM document) version.</p>
          84  +
    pub fn document_version(&self) -> ::std::option::Option<&str> {
          85  +
        self.document_version.as_deref()
          86  +
    }
          87  +
    /// <p>The time and date the request was sent to this managed node.</p>
          88  +
    pub fn requested_date_time(&self) -> ::std::option::Option<&::aws_smithy_types::DateTime> {
          89  +
        self.requested_date_time.as_ref()
          90  +
    }
          91  +
    /// <p>Whether or not the invocation succeeded, failed, or is pending.</p>
          92  +
    pub fn status(&self) -> ::std::option::Option<&crate::types::CommandInvocationStatus> {
          93  +
        self.status.as_ref()
          94  +
    }
          95  +
    /// <p>A detailed status of the command execution for each invocation (each managed node targeted by the command). StatusDetails includes more information than Status because it includes states resulting from error and concurrency control parameters. StatusDetails can show different results than Status. For more information about these statuses, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/monitor-commands.html">Understanding command statuses</a> in the <i>Amazon Web Services Systems Manager User Guide</i>. StatusDetails can be one of the following values:</p>
          96  +
    /// <ul>
          97  +
    /// <li>
          98  +
    /// <p>Pending: The command hasn't been sent to the managed node.</p></li>
          99  +
    /// <li>
         100  +
    /// <p>In Progress: The command has been sent to the managed node but hasn't reached a terminal state.</p></li>
         101  +
    /// <li>
         102  +
    /// <p>Success: The execution of the command or plugin was successfully completed. This is a terminal state.</p></li>
         103  +
    /// <li>
         104  +
    /// <p>Delivery Timed Out: The command wasn't delivered to the managed node before the delivery timeout expired. Delivery timeouts don't count against the parent command's <code>MaxErrors</code> limit, but they do contribute to whether the parent command status is Success or Incomplete. This is a terminal state.</p></li>
         105  +
    /// <li>
         106  +
    /// <p>Execution Timed Out: Command execution started on the managed node, but the execution wasn't complete before the execution timeout expired. Execution timeouts count against the <code>MaxErrors</code> limit of the parent command. This is a terminal state.</p></li>
         107  +
    /// <li>
         108  +
    /// <p>Failed: The command wasn't successful on the managed node. For a plugin, this indicates that the result code wasn't zero. For a command invocation, this indicates that the result code for one or more plugins wasn't zero. Invocation failures count against the <code>MaxErrors</code> limit of the parent command. This is a terminal state.</p></li>
         109  +
    /// <li>
         110  +
    /// <p>Cancelled: The command was terminated before it was completed. This is a terminal state.</p></li>
         111  +
    /// <li>
         112  +
    /// <p>Undeliverable: The command can't be delivered to the managed node. The managed node might not exist or might not be responding. Undeliverable invocations don't count against the parent command's MaxErrors limit and don't contribute to whether the parent command status is Success or Incomplete. This is a terminal state.</p></li>
         113  +
    /// <li>
         114  +
    /// <p>Terminated: The parent command exceeded its MaxErrors limit and subsequent command invocations were canceled by the system. This is a terminal state.</p></li>
         115  +
    /// <li>
         116  +
    /// <p>Delayed: The system attempted to send the command to the managed node but wasn't successful. The system retries again.</p></li>
         117  +
    /// </ul>
         118  +
    pub fn status_details(&self) -> ::std::option::Option<&str> {
         119  +
        self.status_details.as_deref()
         120  +
    }
         121  +
    /// <p>Gets the trace output sent by the agent.</p>
         122  +
    pub fn trace_output(&self) -> ::std::option::Option<&str> {
         123  +
        self.trace_output.as_deref()
         124  +
    }
         125  +
    /// <p>The URL to the plugin's StdOut file in Amazon Simple Storage Service (Amazon S3), if the S3 bucket was defined for the parent command. For an invocation, <code>StandardOutputUrl</code> is populated if there is just one plugin defined for the command, and the S3 bucket was defined for the command.</p>
         126  +
    pub fn standard_output_url(&self) -> ::std::option::Option<&str> {
         127  +
        self.standard_output_url.as_deref()
         128  +
    }
         129  +
    /// <p>The URL to the plugin's StdErr file in Amazon Simple Storage Service (Amazon S3), if the S3 bucket was defined for the parent command. For an invocation, <code>StandardErrorUrl</code> is populated if there is just one plugin defined for the command, and the S3 bucket was defined for the command.</p>
         130  +
    pub fn standard_error_url(&self) -> ::std::option::Option<&str> {
         131  +
        self.standard_error_url.as_deref()
         132  +
    }
         133  +
    /// <p>Plugins processed by the command.</p>
         134  +
    ///
         135  +
    /// If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use `.command_plugins.is_none()`.
         136  +
    pub fn command_plugins(&self) -> &[crate::types::CommandPlugin] {
         137  +
        self.command_plugins.as_deref().unwrap_or_default()
         138  +
    }
         139  +
    /// <p>The Identity and Access Management (IAM) service role that Run Command, a tool in Amazon Web Services Systems Manager, uses to act on your behalf when sending notifications about command status changes on a per managed node basis.</p>
         140  +
    pub fn service_role(&self) -> ::std::option::Option<&str> {
         141  +
        self.service_role.as_deref()
         142  +
    }
         143  +
    /// <p>Configurations for sending notifications about command status changes on a per managed node basis.</p>
         144  +
    pub fn notification_config(&self) -> ::std::option::Option<&crate::types::NotificationConfig> {
         145  +
        self.notification_config.as_ref()
         146  +
    }
         147  +
    /// <p>Amazon CloudWatch Logs information where you want Amazon Web Services Systems Manager to send the command output.</p>
         148  +
    pub fn cloud_watch_output_config(&self) -> ::std::option::Option<&crate::types::CloudWatchOutputConfig> {
         149  +
        self.cloud_watch_output_config.as_ref()
         150  +
    }
         151  +
}
         152  +
static COMMANDINVOCATION_MEMBER_COMMAND_ID: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         153  +
    ::aws_smithy_schema::ShapeId::from_parts("com.amazonaws.ssm#CommandInvocation$CommandId", "com.amazonaws.ssm", "CommandInvocation"),
         154  +
    ::aws_smithy_schema::ShapeType::String,
         155  +
    "CommandId",
         156  +
    0,
         157  +
);
         158  +
static COMMANDINVOCATION_MEMBER_INSTANCE_ID: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         159  +
    ::aws_smithy_schema::ShapeId::from_parts("com.amazonaws.ssm#CommandInvocation$InstanceId", "com.amazonaws.ssm", "CommandInvocation"),
         160  +
    ::aws_smithy_schema::ShapeType::String,
         161  +
    "InstanceId",
         162  +
    1,
         163  +
);
         164  +
static COMMANDINVOCATION_MEMBER_INSTANCE_NAME: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         165  +
    ::aws_smithy_schema::ShapeId::from_parts(
         166  +
        "com.amazonaws.ssm#CommandInvocation$InstanceName",
         167  +
        "com.amazonaws.ssm",
         168  +
        "CommandInvocation",
         169  +
    ),
         170  +
    ::aws_smithy_schema::ShapeType::String,
         171  +
    "InstanceName",
         172  +
    2,
         173  +
);
         174  +
static COMMANDINVOCATION_MEMBER_COMMENT: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         175  +
    ::aws_smithy_schema::ShapeId::from_parts("com.amazonaws.ssm#CommandInvocation$Comment", "com.amazonaws.ssm", "CommandInvocation"),
         176  +
    ::aws_smithy_schema::ShapeType::String,
         177  +
    "Comment",
         178  +
    3,
         179  +
);
         180  +
static COMMANDINVOCATION_MEMBER_DOCUMENT_NAME: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         181  +
    ::aws_smithy_schema::ShapeId::from_parts(
         182  +
        "com.amazonaws.ssm#CommandInvocation$DocumentName",
         183  +
        "com.amazonaws.ssm",
         184  +
        "CommandInvocation",
         185  +
    ),
         186  +
    ::aws_smithy_schema::ShapeType::String,
         187  +
    "DocumentName",
         188  +
    4,
         189  +
);
         190  +
static COMMANDINVOCATION_MEMBER_DOCUMENT_VERSION: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         191  +
    ::aws_smithy_schema::ShapeId::from_parts(
         192  +
        "com.amazonaws.ssm#CommandInvocation$DocumentVersion",
         193  +
        "com.amazonaws.ssm",
         194  +
        "CommandInvocation",
         195  +
    ),
         196  +
    ::aws_smithy_schema::ShapeType::String,
         197  +
    "DocumentVersion",
         198  +
    5,
         199  +
);
         200  +
static COMMANDINVOCATION_MEMBER_REQUESTED_DATE_TIME: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         201  +
    ::aws_smithy_schema::ShapeId::from_parts(
         202  +
        "com.amazonaws.ssm#CommandInvocation$RequestedDateTime",
         203  +
        "com.amazonaws.ssm",
         204  +
        "CommandInvocation",
         205  +
    ),
         206  +
    ::aws_smithy_schema::ShapeType::Timestamp,
         207  +
    "RequestedDateTime",
         208  +
    6,
         209  +
);
         210  +
static COMMANDINVOCATION_MEMBER_STATUS: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         211  +
    ::aws_smithy_schema::ShapeId::from_parts("com.amazonaws.ssm#CommandInvocation$Status", "com.amazonaws.ssm", "CommandInvocation"),
         212  +
    ::aws_smithy_schema::ShapeType::String,
         213  +
    "Status",
         214  +
    7,
         215  +
);
         216  +
static COMMANDINVOCATION_MEMBER_STATUS_DETAILS: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         217  +
    ::aws_smithy_schema::ShapeId::from_parts(
         218  +
        "com.amazonaws.ssm#CommandInvocation$StatusDetails",
         219  +
        "com.amazonaws.ssm",
         220  +
        "CommandInvocation",
         221  +
    ),
         222  +
    ::aws_smithy_schema::ShapeType::String,
         223  +
    "StatusDetails",
         224  +
    8,
         225  +
);
         226  +
static COMMANDINVOCATION_MEMBER_TRACE_OUTPUT: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         227  +
    ::aws_smithy_schema::ShapeId::from_parts(
         228  +
        "com.amazonaws.ssm#CommandInvocation$TraceOutput",
         229  +
        "com.amazonaws.ssm",
         230  +
        "CommandInvocation",
         231  +
    ),
         232  +
    ::aws_smithy_schema::ShapeType::String,
         233  +
    "TraceOutput",
         234  +
    9,
         235  +
);
         236  +
static COMMANDINVOCATION_MEMBER_STANDARD_OUTPUT_URL: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         237  +
    ::aws_smithy_schema::ShapeId::from_parts(
         238  +
        "com.amazonaws.ssm#CommandInvocation$StandardOutputUrl",
         239  +
        "com.amazonaws.ssm",
         240  +
        "CommandInvocation",
         241  +
    ),
         242  +
    ::aws_smithy_schema::ShapeType::String,
         243  +
    "StandardOutputUrl",
         244  +
    10,
         245  +
);
         246  +
static COMMANDINVOCATION_MEMBER_STANDARD_ERROR_URL: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         247  +
    ::aws_smithy_schema::ShapeId::from_parts(
         248  +
        "com.amazonaws.ssm#CommandInvocation$StandardErrorUrl",
         249  +
        "com.amazonaws.ssm",
         250  +
        "CommandInvocation",
         251  +
    ),
         252  +
    ::aws_smithy_schema::ShapeType::String,
         253  +
    "StandardErrorUrl",
         254  +
    11,
         255  +
);
         256  +
static COMMANDINVOCATION_MEMBER_COMMAND_PLUGINS_MEMBER: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         257  +
    ::aws_smithy_schema::ShapeId::from_parts("com.amazonaws.ssm#CommandPluginList$member", "com.amazonaws.ssm", "CommandPluginList"),
         258  +
    ::aws_smithy_schema::ShapeType::Structure,
         259  +
    "member",
         260  +
    0,
         261  +
);
         262  +
static COMMANDINVOCATION_MEMBER_COMMAND_PLUGINS: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         263  +
    ::aws_smithy_schema::ShapeId::from_parts(
         264  +
        "com.amazonaws.ssm#CommandInvocation$CommandPlugins",
         265  +
        "com.amazonaws.ssm",
         266  +
        "CommandInvocation",
         267  +
    ),
         268  +
    ::aws_smithy_schema::ShapeType::List,
         269  +
    "CommandPlugins",
         270  +
    12,
         271  +
)
         272  +
.with_list_member(&COMMANDINVOCATION_MEMBER_COMMAND_PLUGINS_MEMBER);
         273  +
static COMMANDINVOCATION_MEMBER_SERVICE_ROLE: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         274  +
    ::aws_smithy_schema::ShapeId::from_parts(
         275  +
        "com.amazonaws.ssm#CommandInvocation$ServiceRole",
         276  +
        "com.amazonaws.ssm",
         277  +
        "CommandInvocation",
         278  +
    ),
         279  +
    ::aws_smithy_schema::ShapeType::String,
         280  +
    "ServiceRole",
         281  +
    13,
         282  +
);
         283  +
static COMMANDINVOCATION_MEMBER_NOTIFICATION_CONFIG: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         284  +
    ::aws_smithy_schema::ShapeId::from_parts(
         285  +
        "com.amazonaws.ssm#CommandInvocation$NotificationConfig",
         286  +
        "com.amazonaws.ssm",
         287  +
        "CommandInvocation",
         288  +
    ),
         289  +
    ::aws_smithy_schema::ShapeType::Structure,
         290  +
    "NotificationConfig",
         291  +
    14,
         292  +
);
         293  +
static COMMANDINVOCATION_MEMBER_CLOUD_WATCH_OUTPUT_CONFIG: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_member(
         294  +
    ::aws_smithy_schema::ShapeId::from_parts(
         295  +
        "com.amazonaws.ssm#CommandInvocation$CloudWatchOutputConfig",
         296  +
        "com.amazonaws.ssm",
         297  +
        "CommandInvocation",
         298  +
    ),
         299  +
    ::aws_smithy_schema::ShapeType::Structure,
         300  +
    "CloudWatchOutputConfig",
         301  +
    15,
         302  +
);
         303  +
static COMMANDINVOCATION_SCHEMA: ::aws_smithy_schema::Schema<'static> = ::aws_smithy_schema::Schema::new_struct(
         304  +
    ::aws_smithy_schema::ShapeId::from_parts("com.amazonaws.ssm#CommandInvocation", "com.amazonaws.ssm", "CommandInvocation"),
         305  +
    ::aws_smithy_schema::ShapeType::Structure,
         306  +
    &[
         307  +
        &COMMANDINVOCATION_MEMBER_COMMAND_ID,
         308  +
        &COMMANDINVOCATION_MEMBER_INSTANCE_ID,
         309  +
        &COMMANDINVOCATION_MEMBER_INSTANCE_NAME,
         310  +
        &COMMANDINVOCATION_MEMBER_COMMENT,
         311  +
        &COMMANDINVOCATION_MEMBER_DOCUMENT_NAME,
         312  +
        &COMMANDINVOCATION_MEMBER_DOCUMENT_VERSION,
         313  +
        &COMMANDINVOCATION_MEMBER_REQUESTED_DATE_TIME,
         314  +
        &COMMANDINVOCATION_MEMBER_STATUS,
         315  +
        &COMMANDINVOCATION_MEMBER_STATUS_DETAILS,
         316  +
        &COMMANDINVOCATION_MEMBER_TRACE_OUTPUT,
         317  +
        &COMMANDINVOCATION_MEMBER_STANDARD_OUTPUT_URL,
         318  +
        &COMMANDINVOCATION_MEMBER_STANDARD_ERROR_URL,
         319  +
        &COMMANDINVOCATION_MEMBER_COMMAND_PLUGINS,
         320  +
        &COMMANDINVOCATION_MEMBER_SERVICE_ROLE,
         321  +
        &COMMANDINVOCATION_MEMBER_NOTIFICATION_CONFIG,
         322  +
        &COMMANDINVOCATION_MEMBER_CLOUD_WATCH_OUTPUT_CONFIG,
         323  +
    ],
         324  +
);
         325  +
impl CommandInvocation {
         326  +
    /// The schema for this shape.
         327  +
    pub const SCHEMA: &'static ::aws_smithy_schema::Schema<'static> = &COMMANDINVOCATION_SCHEMA;
         328  +
}
         329  +
impl ::aws_smithy_schema::serde::SerializableStruct for CommandInvocation {
         330  +
    #[allow(unused_variables, clippy::diverging_sub_expression)]
         331  +
    fn serialize_members(
         332  +
        &self,
         333  +
        ser: &mut dyn ::aws_smithy_schema::serde::ShapeSerializer,
         334  +
    ) -> ::std::result::Result<(), ::aws_smithy_schema::serde::SerdeError> {
         335  +
        if let Some(ref val) = self.command_id {
         336  +
            ser.write_string(&COMMANDINVOCATION_MEMBER_COMMAND_ID, val)?;
         337  +
        }
         338  +
        if let Some(ref val) = self.instance_id {
         339  +
            ser.write_string(&COMMANDINVOCATION_MEMBER_INSTANCE_ID, val)?;
         340  +
        }
         341  +
        if let Some(ref val) = self.instance_name {
         342  +
            ser.write_string(&COMMANDINVOCATION_MEMBER_INSTANCE_NAME, val)?;
         343  +
        }
         344  +
        if let Some(ref val) = self.comment {
         345  +
            ser.write_string(&COMMANDINVOCATION_MEMBER_COMMENT, val)?;
         346  +
        }
         347  +
        if let Some(ref val) = self.document_name {
         348  +
            ser.write_string(&COMMANDINVOCATION_MEMBER_DOCUMENT_NAME, val)?;
         349  +
        }
         350  +
        if let Some(ref val) = self.document_version {
         351  +
            ser.write_string(&COMMANDINVOCATION_MEMBER_DOCUMENT_VERSION, val)?;
         352  +
        }
         353  +
        if let Some(ref val) = self.requested_date_time {
         354  +
            ser.write_timestamp(&COMMANDINVOCATION_MEMBER_REQUESTED_DATE_TIME, val)?;
         355  +
        }
         356  +
        if let Some(ref val) = self.status {
         357  +
            ser.write_string(&COMMANDINVOCATION_MEMBER_STATUS, val.as_str())?;
         358  +
        }
         359  +
        if let Some(ref val) = self.status_details {
         360  +
            ser.write_string(&COMMANDINVOCATION_MEMBER_STATUS_DETAILS, val)?;
         361  +
        }
         362  +
        if let Some(ref val) = self.trace_output {
         363  +
            ser.write_string(&COMMANDINVOCATION_MEMBER_TRACE_OUTPUT, val)?;
         364  +
        }
         365  +
        if let Some(ref val) = self.standard_output_url {
         366  +
            ser.write_string(&COMMANDINVOCATION_MEMBER_STANDARD_OUTPUT_URL, val)?;
         367  +
        }
         368  +
        if let Some(ref val) = self.standard_error_url {
         369  +
            ser.write_string(&COMMANDINVOCATION_MEMBER_STANDARD_ERROR_URL, val)?;
         370  +
        }
         371  +
        if let Some(ref val) = self.command_plugins {
         372  +
            ser.write_list(
         373  +
                &COMMANDINVOCATION_MEMBER_COMMAND_PLUGINS,
         374  +
                &|ser: &mut dyn ::aws_smithy_schema::serde::ShapeSerializer| {
         375  +
                    for item in val {
         376  +
                        ser.write_struct(crate::types::CommandPlugin::SCHEMA, item)?;
         377  +
                    }
         378  +
                    Ok(())
         379  +
                },
         380  +
            )?;
         381  +
        }
         382  +
        if let Some(ref val) = self.service_role {
         383  +
            ser.write_string(&COMMANDINVOCATION_MEMBER_SERVICE_ROLE, val)?;
         384  +
        }
         385  +
        if let Some(ref val) = self.notification_config {
         386  +
            ser.write_struct(&COMMANDINVOCATION_MEMBER_NOTIFICATION_CONFIG, val)?;
         387  +
        }
         388  +
        if let Some(ref val) = self.cloud_watch_output_config {
         389  +
            ser.write_struct(&COMMANDINVOCATION_MEMBER_CLOUD_WATCH_OUTPUT_CONFIG, val)?;
         390  +
        }
         391  +
        Ok(())
         392  +
    }
         393  +
}
         394  +
impl CommandInvocation {
         395  +
    /// Deserializes this structure from a [`ShapeDeserializer`].
         396  +
    pub fn deserialize(
         397  +
        deserializer: &mut dyn ::aws_smithy_schema::serde::ShapeDeserializer,
         398  +
    ) -> ::std::result::Result<Self, ::aws_smithy_schema::serde::SerdeError> {
         399  +
        #[allow(unused_variables, unused_mut)]
         400  +
        let mut builder = Self::builder();
         401  +
        #[allow(
         402  +
            unused_variables,
         403  +
            unreachable_code,
         404  +
            clippy::single_match,
         405  +
            clippy::match_single_binding,
         406  +
            clippy::diverging_sub_expression
         407  +
        )]
         408  +
        deserializer.read_struct(&COMMANDINVOCATION_SCHEMA, &mut |member, deser| {
         409  +
            match member.member_index() {
         410  +
                Some(0) => {
         411  +
                    if deser.is_null() {
         412  +
                        deser.read_null()?;
         413  +
                    } else {
         414  +
                        builder.command_id = Some(deser.read_string(member)?);
         415  +
                    }
         416  +
                }
         417  +
                Some(1) => {
         418  +
                    if deser.is_null() {
         419  +
                        deser.read_null()?;
         420  +
                    } else {
         421  +
                        builder.instance_id = Some(deser.read_string(member)?);
         422  +
                    }
         423  +
                }
         424  +
                Some(2) => {
         425  +
                    if deser.is_null() {
         426  +
                        deser.read_null()?;
         427  +
                    } else {
         428  +
                        builder.instance_name = Some(deser.read_string(member)?);
         429  +
                    }
         430  +
                }
         431  +
                Some(3) => {
         432  +
                    if deser.is_null() {
         433  +
                        deser.read_null()?;
         434  +
                    } else {
         435  +
                        builder.comment = Some(deser.read_string(member)?);
         436  +
                    }
         437  +
                }
         438  +
                Some(4) => {
         439  +
                    if deser.is_null() {
         440  +
                        deser.read_null()?;
         441  +
                    } else {
         442  +
                        builder.document_name = Some(deser.read_string(member)?);
         443  +
                    }
         444  +
                }
         445  +
                Some(5) => {
         446  +
                    if deser.is_null() {
         447  +
                        deser.read_null()?;
         448  +
                    } else {
         449  +
                        builder.document_version = Some(deser.read_string(member)?);
         450  +
                    }
         451  +
                }
         452  +
                Some(6) => {
         453  +
                    if deser.is_null() {
         454  +
                        deser.read_null()?;
         455  +
                    } else {
         456  +
                        builder.requested_date_time = Some(deser.read_timestamp(member)?);
         457  +
                    }
         458  +
                }
         459  +
                Some(7) => {
         460  +
                    if deser.is_null() {
         461  +
                        deser.read_null()?;
         462  +
                    } else {
         463  +
                        builder.status = Some(crate::types::CommandInvocationStatus::from(deser.read_string(member)?.as_str()));
         464  +
                    }
         465  +
                }
         466  +
                Some(8) => {
         467  +
                    if deser.is_null() {
         468  +
                        deser.read_null()?;
         469  +
                    } else {
         470  +
                        builder.status_details = Some(deser.read_string(member)?);
         471  +
                    }
         472  +
                }
         473  +
                Some(9) => {
         474  +
                    if deser.is_null() {
         475  +
                        deser.read_null()?;
         476  +
                    } else {
         477  +
                        builder.trace_output = Some(deser.read_string(member)?);
         478  +
                    }
         479  +
                }
         480  +
                Some(10) => {
         481  +
                    if deser.is_null() {
         482  +
                        deser.read_null()?;
         483  +
                    } else {
         484  +
                        builder.standard_output_url = Some(deser.read_string(member)?);
         485  +
                    }
         486  +
                }
         487  +
                Some(11) => {
         488  +
                    if deser.is_null() {
         489  +
                        deser.read_null()?;
         490  +
                    } else {
         491  +
                        builder.standard_error_url = Some(deser.read_string(member)?);
         492  +
                    }
         493  +
                }
         494  +
                Some(12) => {
         495  +
                    if deser.is_null() {
         496  +
                        deser.read_null()?;
         497  +
                    } else {
         498  +
                        builder.command_plugins = Some({
         499  +
                            let mut container = Vec::new();
         500  +
                            deser.read_list(member, &mut |deser| {
         501  +
                                container.push(crate::types::CommandPlugin::deserialize(deser)?);
         502  +
                                Ok(())
         503  +
                            })?;
         504  +
                            container
         505  +
                        });
         506  +
                    }
         507  +
                }
         508  +
                Some(13) => {
         509  +
                    if deser.is_null() {
         510  +
                        deser.read_null()?;
         511  +
                    } else {
         512  +
                        builder.service_role = Some(deser.read_string(member)?);
         513  +
                    }
         514  +
                }
         515  +
                Some(14) => {
         516  +
                    if deser.is_null() {
         517  +
                        deser.read_null()?;
         518  +
                    } else {
         519  +
                        builder.notification_config = Some(crate::types::NotificationConfig::deserialize(deser)?);
         520  +
                    }
         521  +
                }
         522  +
                Some(15) => {
         523  +
                    if deser.is_null() {
         524  +
                        deser.read_null()?;
         525  +
                    } else {
         526  +
                        builder.cloud_watch_output_config = Some(crate::types::CloudWatchOutputConfig::deserialize(deser)?);
         527  +
                    }
         528  +
                }
         529  +
                _ => {}
         530  +
            }
         531  +
            Ok(())
         532  +
        })?;
         533  +
        Ok(builder.build())
         534  +
    }
         535  +
}
         536  +
impl CommandInvocation {
         537  +
    /// Deserializes this structure from a body deserializer and HTTP response.
         538  +
    pub fn deserialize_with_response(
         539  +
        deserializer: &mut dyn ::aws_smithy_schema::serde::ShapeDeserializer,
         540  +
        _headers: &::aws_smithy_runtime_api::http::Headers,
         541  +
        _status: u16,
         542  +
        _body: &[u8],
         543  +
    ) -> ::std::result::Result<Self, ::aws_smithy_schema::serde::SerdeError> {
         544  +
        Self::deserialize(deserializer)
         545  +
    }
         546  +
}
         547  +
impl CommandInvocation {
         548  +
    /// Creates a new builder-style object to manufacture [`CommandInvocation`](crate::types::CommandInvocation).
         549  +
    pub fn builder() -> crate::types::builders::CommandInvocationBuilder {
         550  +
        crate::types::builders::CommandInvocationBuilder::default()
         551  +
    }
         552  +
}
         553  +
         554  +
/// A builder for [`CommandInvocation`](crate::types::CommandInvocation).
         555  +
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::default::Default, ::std::fmt::Debug)]
         556  +
#[non_exhaustive]
         557  +
pub struct CommandInvocationBuilder {
         558  +
    pub(crate) command_id: ::std::option::Option<::std::string::String>,
         559  +
    pub(crate) instance_id: ::std::option::Option<::std::string::String>,
         560  +
    pub(crate) instance_name: ::std::option::Option<::std::string::String>,
         561  +
    pub(crate) comment: ::std::option::Option<::std::string::String>,
         562  +
    pub(crate) document_name: ::std::option::Option<::std::string::String>,
         563  +
    pub(crate) document_version: ::std::option::Option<::std::string::String>,
         564  +
    pub(crate) requested_date_time: ::std::option::Option<::aws_smithy_types::DateTime>,
         565  +
    pub(crate) status: ::std::option::Option<crate::types::CommandInvocationStatus>,
         566  +
    pub(crate) status_details: ::std::option::Option<::std::string::String>,
         567  +
    pub(crate) trace_output: ::std::option::Option<::std::string::String>,
         568  +
    pub(crate) standard_output_url: ::std::option::Option<::std::string::String>,
         569  +
    pub(crate) standard_error_url: ::std::option::Option<::std::string::String>,
         570  +
    pub(crate) command_plugins: ::std::option::Option<::std::vec::Vec<crate::types::CommandPlugin>>,
         571  +
    pub(crate) service_role: ::std::option::Option<::std::string::String>,
         572  +
    pub(crate) notification_config: ::std::option::Option<crate::types::NotificationConfig>,
         573  +
    pub(crate) cloud_watch_output_config: ::std::option::Option<crate::types::CloudWatchOutputConfig>,
         574  +
}
         575  +
impl CommandInvocationBuilder {
         576  +
    /// <p>The command against which this invocation was requested.</p>
         577  +
    pub fn command_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
         578  +
        self.command_id = ::std::option::Option::Some(input.into());
         579  +
        self
         580  +
    }
         581  +
    /// <p>The command against which this invocation was requested.</p>
         582  +
    pub fn set_command_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
         583  +
        self.command_id = input;
         584  +
        self
         585  +
    }
         586  +
    /// <p>The command against which this invocation was requested.</p>
         587  +
    pub fn get_command_id(&self) -> &::std::option::Option<::std::string::String> {
         588  +
        &self.command_id
         589  +
    }
         590  +
    /// <p>The managed node ID in which this invocation was requested.</p>
         591  +
    pub fn instance_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
         592  +
        self.instance_id = ::std::option::Option::Some(input.into());
         593  +
        self
         594  +
    }
         595  +
    /// <p>The managed node ID in which this invocation was requested.</p>
         596  +
    pub fn set_instance_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
         597  +
        self.instance_id = input;
         598  +
        self
         599  +
    }
         600  +
    /// <p>The managed node ID in which this invocation was requested.</p>
         601  +
    pub fn get_instance_id(&self) -> &::std::option::Option<::std::string::String> {
         602  +
        &self.instance_id
         603  +
    }
         604  +
    /// <p>The fully qualified host name of the managed node.</p>
         605  +
    pub fn instance_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
         606  +
        self.instance_name = ::std::option::Option::Some(input.into());
         607  +
        self
         608  +
    }
         609  +
    /// <p>The fully qualified host name of the managed node.</p>
         610  +
    pub fn set_instance_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
         611  +
        self.instance_name = input;
         612  +
        self
         613  +
    }
         614  +
    /// <p>The fully qualified host name of the managed node.</p>
         615  +
    pub fn get_instance_name(&self) -> &::std::option::Option<::std::string::String> {
         616  +
        &self.instance_name
         617  +
    }
         618  +
    /// <p>User-specified information about the command, such as a brief description of what the command should do.</p>
         619  +
    pub fn comment(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
         620  +
        self.comment = ::std::option::Option::Some(input.into());
         621  +
        self
         622  +
    }
         623  +
    /// <p>User-specified information about the command, such as a brief description of what the command should do.</p>
         624  +
    pub fn set_comment(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
         625  +
        self.comment = input;
         626  +
        self
         627  +
    }
         628  +
    /// <p>User-specified information about the command, such as a brief description of what the command should do.</p>
         629  +
    pub fn get_comment(&self) -> &::std::option::Option<::std::string::String> {
         630  +
        &self.comment
         631  +
    }
         632  +
    /// <p>The document name that was requested for execution.</p>
         633  +
    pub fn document_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
         634  +
        self.document_name = ::std::option::Option::Some(input.into());
         635  +
        self
         636  +
    }
         637  +
    /// <p>The document name that was requested for execution.</p>
         638  +
    pub fn set_document_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
         639  +
        self.document_name = input;
         640  +
        self
         641  +
    }
         642  +
    /// <p>The document name that was requested for execution.</p>
         643  +
    pub fn get_document_name(&self) -> &::std::option::Option<::std::string::String> {
         644  +
        &self.document_name
         645  +
    }
         646  +
    /// <p>The Systems Manager document (SSM document) version.</p>
         647  +
    pub fn document_version(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
         648  +
        self.document_version = ::std::option::Option::Some(input.into());
         649  +
        self
         650  +
    }
         651  +
    /// <p>The Systems Manager document (SSM document) version.</p>
         652  +
    pub fn set_document_version(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
         653  +
        self.document_version = input;
         654  +
        self
         655  +
    }
         656  +
    /// <p>The Systems Manager document (SSM document) version.</p>
         657  +
    pub fn get_document_version(&self) -> &::std::option::Option<::std::string::String> {
         658  +
        &self.document_version
         659  +
    }
         660  +
    /// <p>The time and date the request was sent to this managed node.</p>
         661  +
    pub fn requested_date_time(mut self, input: ::aws_smithy_types::DateTime) -> Self {
         662  +
        self.requested_date_time = ::std::option::Option::Some(input);
         663  +
        self
         664  +
    }
         665  +
    /// <p>The time and date the request was sent to this managed node.</p>
         666  +
    pub fn set_requested_date_time(mut self, input: ::std::option::Option<::aws_smithy_types::DateTime>) -> Self {
         667  +
        self.requested_date_time = input;
         668  +
        self
         669  +
    }
         670  +
    /// <p>The time and date the request was sent to this managed node.</p>
         671  +
    pub fn get_requested_date_time(&self) -> &::std::option::Option<::aws_smithy_types::DateTime> {
         672  +
        &self.requested_date_time
         673  +
    }
         674  +
    /// <p>Whether or not the invocation succeeded, failed, or is pending.</p>
         675  +
    pub fn status(mut self, input: crate::types::CommandInvocationStatus) -> Self {
         676  +
        self.status = ::std::option::Option::Some(input);
         677  +
        self
         678  +
    }
         679  +
    /// <p>Whether or not the invocation succeeded, failed, or is pending.</p>
         680  +
    pub fn set_status(mut self, input: ::std::option::Option<crate::types::CommandInvocationStatus>) -> Self {
         681  +
        self.status = input;
         682  +
        self
         683  +
    }
         684  +
    /// <p>Whether or not the invocation succeeded, failed, or is pending.</p>
         685  +
    pub fn get_status(&self) -> &::std::option::Option<crate::types::CommandInvocationStatus> {
         686  +
        &self.status
         687  +
    }
         688  +
    /// <p>A detailed status of the command execution for each invocation (each managed node targeted by the command). StatusDetails includes more information than Status because it includes states resulting from error and concurrency control parameters. StatusDetails can show different results than Status. For more information about these statuses, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/monitor-commands.html">Understanding command statuses</a> in the <i>Amazon Web Services Systems Manager User Guide</i>. StatusDetails can be one of the following values:</p>
         689  +
    /// <ul>
         690  +
    /// <li>
         691  +
    /// <p>Pending: The command hasn't been sent to the managed node.</p></li>
         692  +
    /// <li>
         693  +
    /// <p>In Progress: The command has been sent to the managed node but hasn't reached a terminal state.</p></li>
         694  +
    /// <li>
         695  +
    /// <p>Success: The execution of the command or plugin was successfully completed. This is a terminal state.</p></li>
         696  +
    /// <li>
         697  +
    /// <p>Delivery Timed Out: The command wasn't delivered to the managed node before the delivery timeout expired. Delivery timeouts don't count against the parent command's <code>MaxErrors</code> limit, but they do contribute to whether the parent command status is Success or Incomplete. This is a terminal state.</p></li>
         698  +
    /// <li>
         699  +
    /// <p>Execution Timed Out: Command execution started on the managed node, but the execution wasn't complete before the execution timeout expired. Execution timeouts count against the <code>MaxErrors</code> limit of the parent command. This is a terminal state.</p></li>
         700  +
    /// <li>
         701  +
    /// <p>Failed: The command wasn't successful on the managed node. For a plugin, this indicates that the result code wasn't zero. For a command invocation, this indicates that the result code for one or more plugins wasn't zero. Invocation failures count against the <code>MaxErrors</code> limit of the parent command. This is a terminal state.</p></li>
         702  +
    /// <li>
         703  +
    /// <p>Cancelled: The command was terminated before it was completed. This is a terminal state.</p></li>
         704  +
    /// <li>
         705  +
    /// <p>Undeliverable: The command can't be delivered to the managed node. The managed node might not exist or might not be responding. Undeliverable invocations don't count against the parent command's MaxErrors limit and don't contribute to whether the parent command status is Success or Incomplete. This is a terminal state.</p></li>
         706  +
    /// <li>
         707  +
    /// <p>Terminated: The parent command exceeded its MaxErrors limit and subsequent command invocations were canceled by the system. This is a terminal state.</p></li>
         708  +
    /// <li>
         709  +
    /// <p>Delayed: The system attempted to send the command to the managed node but wasn't successful. The system retries again.</p></li>
         710  +
    /// </ul>
         711  +
    pub fn status_details(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
         712  +
        self.status_details = ::std::option::Option::Some(input.into());
         713  +
        self
         714  +
    }
         715  +
    /// <p>A detailed status of the command execution for each invocation (each managed node targeted by the command). StatusDetails includes more information than Status because it includes states resulting from error and concurrency control parameters. StatusDetails can show different results than Status. For more information about these statuses, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/monitor-commands.html">Understanding command statuses</a> in the <i>Amazon Web Services Systems Manager User Guide</i>. StatusDetails can be one of the following values:</p>
         716  +
    /// <ul>
         717  +
    /// <li>
         718  +
    /// <p>Pending: The command hasn't been sent to the managed node.</p></li>
         719  +
    /// <li>
         720  +
    /// <p>In Progress: The command has been sent to the managed node but hasn't reached a terminal state.</p></li>
         721  +
    /// <li>
         722  +
    /// <p>Success: The execution of the command or plugin was successfully completed. This is a terminal state.</p></li>
         723  +
    /// <li>
         724  +
    /// <p>Delivery Timed Out: The command wasn't delivered to the managed node before the delivery timeout expired. Delivery timeouts don't count against the parent command's <code>MaxErrors</code> limit, but they do contribute to whether the parent command status is Success or Incomplete. This is a terminal state.</p></li>
         725  +
    /// <li>
         726  +
    /// <p>Execution Timed Out: Command execution started on the managed node, but the execution wasn't complete before the execution timeout expired. Execution timeouts count against the <code>MaxErrors</code> limit of the parent command. This is a terminal state.</p></li>
         727  +
    /// <li>
         728  +
    /// <p>Failed: The command wasn't successful on the managed node. For a plugin, this indicates that the result code wasn't zero. For a command invocation, this indicates that the result code for one or more plugins wasn't zero. Invocation failures count against the <code>MaxErrors</code> limit of the parent command. This is a terminal state.</p></li>
         729  +
    /// <li>
         730  +
    /// <p>Cancelled: The command was terminated before it was completed. This is a terminal state.</p></li>
         731  +
    /// <li>
         732  +
    /// <p>Undeliverable: The command can't be delivered to the managed node. The managed node might not exist or might not be responding. Undeliverable invocations don't count against the parent command's MaxErrors limit and don't contribute to whether the parent command status is Success or Incomplete. This is a terminal state.</p></li>
         733  +
    /// <li>
         734  +
    /// <p>Terminated: The parent command exceeded its MaxErrors limit and subsequent command invocations were canceled by the system. This is a terminal state.</p></li>
         735  +
    /// <li>
         736  +
    /// <p>Delayed: The system attempted to send the command to the managed node but wasn't successful. The system retries again.</p></li>
         737  +
    /// </ul>
         738  +
    pub fn set_status_details(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
         739  +
        self.status_details = input;
         740  +
        self
         741  +
    }
         742  +
    /// <p>A detailed status of the command execution for each invocation (each managed node targeted by the command). StatusDetails includes more information than Status because it includes states resulting from error and concurrency control parameters. StatusDetails can show different results than Status. For more information about these statuses, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/monitor-commands.html">Understanding command statuses</a> in the <i>Amazon Web Services Systems Manager User Guide</i>. StatusDetails can be one of the following values:</p>
         743  +
    /// <ul>
         744  +
    /// <li>
         745  +
    /// <p>Pending: The command hasn't been sent to the managed node.</p></li>
         746  +
    /// <li>
         747  +
    /// <p>In Progress: The command has been sent to the managed node but hasn't reached a terminal state.</p></li>
         748  +
    /// <li>
         749  +
    /// <p>Success: The execution of the command or plugin was successfully completed. This is a terminal state.</p></li>
         750  +
    /// <li>
         751  +
    /// <p>Delivery Timed Out: The command wasn't delivered to the managed node before the delivery timeout expired. Delivery timeouts don't count against the parent command's <code>MaxErrors</code> limit, but they do contribute to whether the parent command status is Success or Incomplete. This is a terminal state.</p></li>
         752  +
    /// <li>
         753  +
    /// <p>Execution Timed Out: Command execution started on the managed node, but the execution wasn't complete before the execution timeout expired. Execution timeouts count against the <code>MaxErrors</code> limit of the parent command. This is a terminal state.</p></li>
         754  +
    /// <li>
         755  +
    /// <p>Failed: The command wasn't successful on the managed node. For a plugin, this indicates that the result code wasn't zero. For a command invocation, this indicates that the result code for one or more plugins wasn't zero. Invocation failures count against the <code>MaxErrors</code> limit of the parent command. This is a terminal state.</p></li>
         756  +
    /// <li>
         757  +
    /// <p>Cancelled: The command was terminated before it was completed. This is a terminal state.</p></li>
         758  +
    /// <li>
         759  +
    /// <p>Undeliverable: The command can't be delivered to the managed node. The managed node might not exist or might not be responding. Undeliverable invocations don't count against the parent command's MaxErrors limit and don't contribute to whether the parent command status is Success or Incomplete. This is a terminal state.</p></li>
         760  +
    /// <li>
         761  +
    /// <p>Terminated: The parent command exceeded its MaxErrors limit and subsequent command invocations were canceled by the system. This is a terminal state.</p></li>
         762  +
    /// <li>
         763  +
    /// <p>Delayed: The system attempted to send the command to the managed node but wasn't successful. The system retries again.</p></li>
         764  +
    /// </ul>
         765  +
    pub fn get_status_details(&self) -> &::std::option::Option<::std::string::String> {
         766  +
        &self.status_details
         767  +
    }
         768  +
    /// <p>Gets the trace output sent by the agent.</p>
         769  +
    pub fn trace_output(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
         770  +
        self.trace_output = ::std::option::Option::Some(input.into());
         771  +
        self
         772  +
    }
         773  +
    /// <p>Gets the trace output sent by the agent.</p>
         774  +
    pub fn set_trace_output(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
         775  +
        self.trace_output = input;
         776  +
        self
         777  +
    }
         778  +
    /// <p>Gets the trace output sent by the agent.</p>
         779  +
    pub fn get_trace_output(&self) -> &::std::option::Option<::std::string::String> {
         780  +
        &self.trace_output
         781  +
    }
         782  +
    /// <p>The URL to the plugin's StdOut file in Amazon Simple Storage Service (Amazon S3), if the S3 bucket was defined for the parent command. For an invocation, <code>StandardOutputUrl</code> is populated if there is just one plugin defined for the command, and the S3 bucket was defined for the command.</p>
         783  +
    pub fn standard_output_url(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
         784  +
        self.standard_output_url = ::std::option::Option::Some(input.into());
         785  +
        self
         786  +
    }
         787  +
    /// <p>The URL to the plugin's StdOut file in Amazon Simple Storage Service (Amazon S3), if the S3 bucket was defined for the parent command. For an invocation, <code>StandardOutputUrl</code> is populated if there is just one plugin defined for the command, and the S3 bucket was defined for the command.</p>
         788  +
    pub fn set_standard_output_url(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
         789  +
        self.standard_output_url = input;
         790  +
        self
         791  +
    }
         792  +
    /// <p>The URL to the plugin's StdOut file in Amazon Simple Storage Service (Amazon S3), if the S3 bucket was defined for the parent command. For an invocation, <code>StandardOutputUrl</code> is populated if there is just one plugin defined for the command, and the S3 bucket was defined for the command.</p>
         793  +
    pub fn get_standard_output_url(&self) -> &::std::option::Option<::std::string::String> {
         794  +
        &self.standard_output_url
         795  +
    }
         796  +
    /// <p>The URL to the plugin's StdErr file in Amazon Simple Storage Service (Amazon S3), if the S3 bucket was defined for the parent command. For an invocation, <code>StandardErrorUrl</code> is populated if there is just one plugin defined for the command, and the S3 bucket was defined for the command.</p>
         797  +
    pub fn standard_error_url(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
         798  +
        self.standard_error_url = ::std::option::Option::Some(input.into());
         799  +
        self
         800  +
    }
         801  +
    /// <p>The URL to the plugin's StdErr file in Amazon Simple Storage Service (Amazon S3), if the S3 bucket was defined for the parent command. For an invocation, <code>StandardErrorUrl</code> is populated if there is just one plugin defined for the command, and the S3 bucket was defined for the command.</p>
         802  +
    pub fn set_standard_error_url(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
         803  +
        self.standard_error_url = input;
         804  +
        self
         805  +
    }
         806  +
    /// <p>The URL to the plugin's StdErr file in Amazon Simple Storage Service (Amazon S3), if the S3 bucket was defined for the parent command. For an invocation, <code>StandardErrorUrl</code> is populated if there is just one plugin defined for the command, and the S3 bucket was defined for the command.</p>
         807  +
    pub fn get_standard_error_url(&self) -> &::std::option::Option<::std::string::String> {
         808  +
        &self.standard_error_url
         809  +
    }
         810  +
    /// Appends an item to `command_plugins`.
         811  +
    ///
         812  +
    /// To override the contents of this collection use [`set_command_plugins`](Self::set_command_plugins).
         813  +
    ///
         814  +
    /// <p>Plugins processed by the command.</p>
         815  +
    pub fn command_plugins(mut self, input: crate::types::CommandPlugin) -> Self {
         816  +
        let mut v = self.command_plugins.unwrap_or_default();
         817  +
        v.push(input);
         818  +
        self.command_plugins = ::std::option::Option::Some(v);
         819  +
        self
         820  +
    }
         821  +
    /// <p>Plugins processed by the command.</p>
         822  +
    pub fn set_command_plugins(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::CommandPlugin>>) -> Self {
         823  +
        self.command_plugins = input;
         824  +
        self
         825  +
    }
         826  +
    /// <p>Plugins processed by the command.</p>
         827  +
    pub fn get_command_plugins(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::CommandPlugin>> {
         828  +
        &self.command_plugins
         829  +
    }
         830  +
    /// <p>The Identity and Access Management (IAM) service role that Run Command, a tool in Amazon Web Services Systems Manager, uses to act on your behalf when sending notifications about command status changes on a per managed node basis.</p>
         831  +
    pub fn service_role(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
         832  +
        self.service_role = ::std::option::Option::Some(input.into());
         833  +
        self
         834  +
    }
         835  +
    /// <p>The Identity and Access Management (IAM) service role that Run Command, a tool in Amazon Web Services Systems Manager, uses to act on your behalf when sending notifications about command status changes on a per managed node basis.</p>
         836  +
    pub fn set_service_role(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
         837  +
        self.service_role = input;
         838  +
        self
         839  +
    }
         840  +
    /// <p>The Identity and Access Management (IAM) service role that Run Command, a tool in Amazon Web Services Systems Manager, uses to act on your behalf when sending notifications about command status changes on a per managed node basis.</p>
         841  +
    pub fn get_service_role(&self) -> &::std::option::Option<::std::string::String> {
         842  +
        &self.service_role
         843  +
    }
         844  +
    /// <p>Configurations for sending notifications about command status changes on a per managed node basis.</p>
         845  +
    pub fn notification_config(mut self, input: crate::types::NotificationConfig) -> Self {
         846  +
        self.notification_config = ::std::option::Option::Some(input);
         847  +
        self
         848  +
    }
         849  +
    /// <p>Configurations for sending notifications about command status changes on a per managed node basis.</p>
         850  +
    pub fn set_notification_config(mut self, input: ::std::option::Option<crate::types::NotificationConfig>) -> Self {
         851  +
        self.notification_config = input;
         852  +
        self
         853  +
    }
         854  +
    /// <p>Configurations for sending notifications about command status changes on a per managed node basis.</p>
         855  +
    pub fn get_notification_config(&self) -> &::std::option::Option<crate::types::NotificationConfig> {
         856  +
        &self.notification_config
         857  +
    }
         858  +
    /// <p>Amazon CloudWatch Logs information where you want Amazon Web Services Systems Manager to send the command output.</p>
         859  +
    pub fn cloud_watch_output_config(mut self, input: crate::types::CloudWatchOutputConfig) -> Self {
         860  +
        self.cloud_watch_output_config = ::std::option::Option::Some(input);
         861  +
        self
         862  +
    }
         863  +
    /// <p>Amazon CloudWatch Logs information where you want Amazon Web Services Systems Manager to send the command output.</p>
         864  +
    pub fn set_cloud_watch_output_config(mut self, input: ::std::option::Option<crate::types::CloudWatchOutputConfig>) -> Self {
         865  +
        self.cloud_watch_output_config = input;
         866  +
        self
         867  +
    }
         868  +
    /// <p>Amazon CloudWatch Logs information where you want Amazon Web Services Systems Manager to send the command output.</p>
         869  +
    pub fn get_cloud_watch_output_config(&self) -> &::std::option::Option<crate::types::CloudWatchOutputConfig> {
         870  +
        &self.cloud_watch_output_config
         871  +
    }
         872  +
    /// Consumes the builder and constructs a [`CommandInvocation`](crate::types::CommandInvocation).
         873  +
    pub fn build(self) -> crate::types::CommandInvocation {
         874  +
        crate::types::CommandInvocation {
         875  +
            command_id: self.command_id,
         876  +
            instance_id: self.instance_id,
         877  +
            instance_name: self.instance_name,
         878  +
            comment: self.comment,
         879  +
            document_name: self.document_name,
         880  +
            document_version: self.document_version,
         881  +
            requested_date_time: self.requested_date_time,
         882  +
            status: self.status,
         883  +
            status_details: self.status_details,
         884  +
            trace_output: self.trace_output,
         885  +
            standard_output_url: self.standard_output_url,
         886  +
            standard_error_url: self.standard_error_url,
         887  +
            command_plugins: self.command_plugins,
         888  +
            service_role: self.service_role,
         889  +
            notification_config: self.notification_config,
         890  +
            cloud_watch_output_config: self.cloud_watch_output_config,
         891  +
        }
         892  +
    }
         893  +
}