AWS SDK

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl super::Client {

    /// Constructs a fluent builder for the [`CompleteMultipartUpload`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder) operation.

    ///

    /// - The fluent builder is configurable:

    ///   - [`key(impl Into<String>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::key) / [`set_key(Option<String>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::set_key):<br>required: **true**<br><p>Object key for which the multipart upload was initiated.</p><br>

    ///   - [`multipart_upload(CompletedMultipartUpload)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::multipart_upload) / [`set_multipart_upload(Option<CompletedMultipartUpload>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::set_multipart_upload):<br>required: **false**<br><p>The container for the multipart upload request information.</p><br>

    ///   - [`upload_id(impl Into<String>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::upload_id) / [`set_upload_id(Option<String>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::set_upload_id):<br>required: **true**<br><p>ID for the initiated multipart upload.</p><br>

    ///   - [`checksum_crc32(impl Into<String>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::checksum_crc32) / [`set_checksum_crc32(Option<String>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::set_checksum_crc32):<br>required: **false**<br><p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p><br>

    ///   - [`checksum_crc32_c(impl Into<String>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::checksum_crc32_c) / [`set_checksum_crc32_c(Option<String>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::set_checksum_crc32_c):<br>required: **false**<br><p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p><br>

    ///   - [`checksum_sha1(impl Into<String>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::checksum_sha1) / [`set_checksum_sha1(Option<String>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::set_checksum_sha1):<br>required: **false**<br><p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p><br>

    ///   - [`checksum_sha256(impl Into<String>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::checksum_sha256) / [`set_checksum_sha256(Option<String>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::set_checksum_sha256):<br>required: **false**<br><p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p><br>

    ///   - [`request_payer(RequestPayer)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::request_payer) / [`set_request_payer(Option<RequestPayer>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::set_request_payer):<br>required: **false**<br><p>Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html">Downloading Objects in Requester Pays Buckets</a> in the <i>Amazon S3 User Guide</i>.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`expected_bucket_owner(impl Into<String>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::expected_bucket_owner) / [`set_expected_bucket_owner(Option<String>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::set_expected_bucket_owner):<br>required: **false**<br><p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p><br>

    ///   - [`sse_customer_algorithm(impl Into<String>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::sse_customer_algorithm) / [`set_sse_customer_algorithm(Option<String>)`](crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadFluentBuilder::set_sse_customer_algorithm):<br>required: **false**<br><p>The server-side encryption (SSE) algorithm used to encrypt the object. This parameter is required only when the object was created using a checksum algorithm or if your bucket policy requires the use of SSE-C. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/ServerSideEncryptionCustomerKeys.html#ssec-require-condition-key">Protecting data using SSE-C keys</a> in the <i>Amazon S3 User Guide</i>.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl super::Client {

    /// Constructs a fluent builder for the [`CopyObject`](crate::operation::copy_object::builders::CopyObjectFluentBuilder) operation.

    ///

    /// - The fluent builder is configurable:

    ///   - [`acl(ObjectCannedAcl)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::acl) / [`set_acl(Option<ObjectCannedAcl>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::set_acl):<br>required: **false**<br><p>The canned access control list (ACL) to apply to the object.</p> <p>When you copy an object, the ACL metadata is not preserved and is set to <code>private</code> by default. Only the owner has full access control. To override the default ACL setting, specify a new ACL when you generate a copy request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/S3_ACLs_UsingACLs.html">Using ACLs</a>.</p> <p>If the destination bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept <code>PUT</code> requests that don't specify an ACL or <code>PUT</code> requests that specify bucket owner full control ACLs, such as the <code>bucket-owner-full-control</code> canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/about-object-ownership.html">Controlling ownership of objects and disabling ACLs</a> in the <i>Amazon S3 User Guide</i>.</p><note>  <ul>   <li>    <p>If your destination bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.</p></li>   <li>    <p>This functionality is not supported for directory buckets.</p></li>   <li>    <p>This functionality is not supported for Amazon S3 on Outposts.</p></li>  </ul> </note><br>

    ///   - [`cache_control(impl Into<String>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::cache_control) / [`set_cache_control(Option<String>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::set_cache_control):<br>required: **false**<br><p>Specifies the caching behavior along the request/reply chain.</p><br>

    ///   - [`checksum_algorithm(ChecksumAlgorithm)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::checksum_algorithm) / [`set_checksum_algorithm(Option<ChecksumAlgorithm>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::set_checksum_algorithm):<br>required: **false**<br><p>Indicates the algorithm that you want Amazon S3 to use to create the checksum for the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p> <p>When you copy an object, if the source object has a checksum, that checksum value will be copied to the new object by default. If the <code>CopyObject</code> request does not include this <code>x-amz-checksum-algorithm</code> header, the checksum algorithm will be copied from the source object to the destination object (if it's present on the source object). You can optionally specify a different checksum algorithm to use with the <code>x-amz-checksum-algorithm</code> header. Unrecognized or unsupported values will respond with the HTTP status code <code>400 Bad Request</code>.</p><note>  <p>For directory buckets, when you use Amazon Web Services SDKs, <code>CRC32</code> is the default checksum algorithm that's used for performance.</p> </note><br>

    ///   - [`content_disposition(impl Into<String>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::content_disposition) / [`set_content_disposition(Option<String>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::set_content_disposition):<br>required: **false**<br><p>Specifies presentational information for the object. Indicates whether an object should be displayed in a web browser or downloaded as a file. It allows specifying the desired filename for the downloaded file.</p><br>

    ///   - [`content_encoding(impl Into<String>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::content_encoding) / [`set_content_encoding(Option<String>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::set_content_encoding):<br>required: **false**<br><p>Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.</p><note>  <p>For directory buckets, only the <code>aws-chunked</code> value is supported in this header field.</p> </note><br>

    ///   - [`content_language(impl Into<String>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::content_language) / [`set_content_language(Option<String>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::set_content_language):<br>required: **false**<br><p>The language the content is in.</p><br>

    ///   - [`content_type(impl Into<String>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::content_type) / [`set_content_type(Option<String>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::set_content_type):<br>required: **false**<br><p>A standard MIME type that describes the format of the object data.</p><br>

    ///   - [`copy_source(impl Into<String>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::copy_source) / [`set_copy_source(Option<String>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::set_copy_source):<br>required: **true**<br><p>Specifies the source object for the copy operation. The source object can be up to 5 GB. If the source object is an object that was uploaded by using a multipart upload, the object copy will be a single part object after the source object is copied to the destination bucket.</p> <p>You specify the value of the copy source in one of two formats, depending on whether you want to access the source object through an <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/access-points.html">access point</a>:</p> <ul>  <li>   <p>For objects not accessed through an access point, specify the name of the source bucket and the key of the source object, separated by a slash (/). For example, to copy the object <code>reports/january.pdf</code> from the general purpose bucket <code>awsexamplebucket</code>, use <code>awsexamplebucket/reports/january.pdf</code>. The value must be URL-encoded. To copy the object <code>reports/january.pdf</code> from the directory bucket <code>awsexamplebucket--use1-az5--x-s3</code>, use <code>awsexamplebucket--use1-az5--x-s3/reports/january.pdf</code>. The value must be URL-encoded.</p></li>  <li>   <p>For objects accessed through access points, specify the Amazon Resource Name (ARN) of the object as accessed through the access point, in the format <code>arn:aws:s3:<region>      :      <account-id>       :accesspoint/       <access-point-name>        /object/        <key></key>       </access-point-name>      </account-id>     </region></code>. For example, to copy the object <code>reports/january.pdf</code> through access point <code>my-access-point</code> owned by account <code>123456789012</code> in Region <code>us-west-2</code>, use the URL encoding of <code>arn:aws:s3:us-west-2:123456789012:accesspoint/my-access-point/object/reports/january.pdf</code>. The value must be URL encoded.</p><note>    <ul>     <li>      <p>Amazon S3 supports copy operations using Access points only when the source and destination buckets are in the same Amazon Web Services Region.</p></li>     <li>      <p>Access points are not supported by directory buckets.</p></li>    </ul>   </note>   <p>Alternatively, for objects accessed through Amazon S3 on Outposts, specify the ARN of the object as accessed in the format <code>arn:aws:s3-outposts:<region>      :      <account-id>       :outpost/       <outpost-id>        /object/        <key></key>       </outpost-id>      </account-id>     </region></code>. For example, to copy the object <code>reports/january.pdf</code> through outpost <code>my-outpost</code> owned by account <code>123456789012</code> in Region <code>us-west-2</code>, use the URL encoding of <code>arn:aws:s3-outposts:us-west-2:123456789012:outpost/my-outpost/object/reports/january.pdf</code>. The value must be URL-encoded.</p></li> </ul> <p>If your source bucket versioning is enabled, the <code>x-amz-copy-source</code> header by default identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the <code>versionId</code> query parameter. Specifically, append <code>?versionId=<version-id></version-id></code> to the value (for example, <code>awsexamplebucket/reports/january.pdf?versionId=QUpfdndhfd8438MNFDN93jdnJFkdmqnh893</code>). If you don't specify a version ID, Amazon S3 copies the latest version of the source object.</p> <p>If you enable versioning on the destination bucket, Amazon S3 generates a unique version ID for the copied object. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the <code>x-amz-version-id</code> response header in the response.</p> <p>If you do not enable versioning or suspend it on the destination bucket, the version ID that Amazon S3 generates in the <code>x-amz-version-id</code> response header is always null.</p><note>  <p><b>Directory buckets</b> - S3 Versioning isn't enabled and supported for directory buckets.</p> </note><br>

    ///   - [`copy_source_if_match(impl Into<String>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::copy_source_if_match) / [`set_copy_source_if_match(Option<String>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::set_copy_source_if_match):<br>required: **false**<br><p>Copies the object if its entity tag (ETag) matches the specified tag.</p> <p>If both the <code>x-amz-copy-source-if-match</code> and <code>x-amz-copy-source-if-unmodified-since</code> headers are present in the request and evaluate as follows, Amazon S3 returns <code>200 OK</code> and copies the data:</p> <ul>  <li>   <p><code>x-amz-copy-source-if-match</code> condition evaluates to true</p></li>  <li>   <p><code>x-amz-copy-source-if-unmodified-since</code> condition evaluates to false</p></li> </ul><br>

    ///   - [`copy_source_if_modified_since(DateTime)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::copy_source_if_modified_since) / [`set_copy_source_if_modified_since(Option<DateTime>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::set_copy_source_if_modified_since):<br>required: **false**<br><p>Copies the object if it has been modified since the specified time.</p> <p>If both the <code>x-amz-copy-source-if-none-match</code> and <code>x-amz-copy-source-if-modified-since</code> headers are present in the request and evaluate as follows, Amazon S3 returns the <code>412 Precondition Failed</code> response code:</p> <ul>  <li>   <p><code>x-amz-copy-source-if-none-match</code> condition evaluates to false</p></li>  <li>   <p><code>x-amz-copy-source-if-modified-since</code> condition evaluates to true</p></li> </ul><br>

    ///   - [`copy_source_if_none_match(impl Into<String>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::copy_source_if_none_match) / [`set_copy_source_if_none_match(Option<String>)`](crate::operation::copy_object::builders::CopyObjectFluentBuilder::set_copy_source_if_none_match):<br>required: **false**<br><p>Copies the object if its entity tag (ETag) is different than the specified ETag.</p> <p>If both the <code>x-amz-copy-source-if-none-match</code> and <code>x-amz-copy-source-if-modified-since</code> headers are present in the request and evaluate as follows, Amazon S3 returns the <code>412 Precondition Failed</code> response code:</p> <ul>  <li>   <p><code>x-amz-copy-source-if-none-match</code> condition evaluates to false</p></li>  <li>   <p><code>x-amz-copy-source-if-modified-since</code> condition evaluates to true</p></li> </ul><br>

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl super::Client {

    /// Constructs a fluent builder for the [`CreateBucket`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder) operation.

    ///

    /// - The fluent builder is configurable:

    ///   - [`acl(BucketCannedAcl)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::acl) / [`set_acl(Option<BucketCannedAcl>)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::set_acl):<br>required: **false**<br><p>The canned ACL to apply to the bucket.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`create_bucket_configuration(CreateBucketConfiguration)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::create_bucket_configuration) / [`set_create_bucket_configuration(Option<CreateBucketConfiguration>)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::set_create_bucket_configuration):<br>required: **false**<br><p>The configuration information for the bucket.</p><br>

    ///   - [`grant_full_control(impl Into<String>)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::grant_full_control) / [`set_grant_full_control(Option<String>)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::set_grant_full_control):<br>required: **false**<br><p>Allows grantee the read, write, read ACP, and write ACP permissions on the bucket.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`grant_read(impl Into<String>)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::grant_read) / [`set_grant_read(Option<String>)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::set_grant_read):<br>required: **false**<br><p>Allows grantee to list the objects in the bucket.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`grant_read_acp(impl Into<String>)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::grant_read_acp) / [`set_grant_read_acp(Option<String>)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::set_grant_read_acp):<br>required: **false**<br><p>Allows grantee to read the bucket ACL.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`grant_write(impl Into<String>)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::grant_write) / [`set_grant_write(Option<String>)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::set_grant_write):<br>required: **false**<br><p>Allows grantee to create new objects in the bucket.</p> <p>For the bucket and object owners of existing objects, also allows deletions and overwrites of those objects.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`grant_write_acp(impl Into<String>)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::grant_write_acp) / [`set_grant_write_acp(Option<String>)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::set_grant_write_acp):<br>required: **false**<br><p>Allows grantee to write the ACL for the applicable bucket.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`object_lock_enabled_for_bucket(bool)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::object_lock_enabled_for_bucket) / [`set_object_lock_enabled_for_bucket(Option<bool>)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::set_object_lock_enabled_for_bucket):<br>required: **false**<br><p>Specifies whether you want S3 Object Lock to be enabled for the new bucket.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`object_ownership(ObjectOwnership)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::object_ownership) / [`set_object_ownership(Option<ObjectOwnership>)`](crate::operation::create_bucket::builders::CreateBucketFluentBuilder::set_object_ownership):<br>required: **false**<br><p>The container element for object ownership for a bucket's ownership controls.</p> <p><code>BucketOwnerPreferred</code> - Objects uploaded to the bucket change ownership to the bucket owner if the objects are uploaded with the <code>bucket-owner-full-control</code> canned ACL.</p> <p><code>ObjectWriter</code> - The uploading account will own the object if the object is uploaded with the <code>bucket-owner-full-control</code> canned ACL.</p> <p><code>BucketOwnerEnforced</code> - Access control lists (ACLs) are disabled and no longer affect permissions. The bucket owner automatically owns and has full control over every object in the bucket. The bucket only accepts PUT requests that don't specify an ACL or specify bucket owner full control ACLs (such as the predefined <code>bucket-owner-full-control</code> canned ACL or a custom ACL in XML format that grants the same permissions).</p> <p>By default, <code>ObjectOwnership</code> is set to <code>BucketOwnerEnforced</code> and ACLs are disabled. We recommend keeping ACLs disabled, except in uncommon use cases where you must control access for each object individually. For more information about S3 Object Ownership, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/about-object-ownership.html">Controlling ownership of objects and disabling ACLs for your bucket</a> in the <i>Amazon S3 User Guide</i>.</p><note>  <p>This functionality is not supported for directory buckets. Directory buckets use the bucket owner enforced setting for S3 Object Ownership.</p> </note><br>

    /// - On success, responds with [`CreateBucketOutput`](crate::operation::create_bucket::CreateBucketOutput) with field(s):

    ///   - [`location(Option<String>)`](crate::operation::create_bucket::CreateBucketOutput::location): <p>A forward slash followed by the name of the bucket.</p>

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl super::Client {

    /// Constructs a fluent builder for the [`CreateMultipartUpload`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder) operation.

    ///

    /// - The fluent builder is configurable:

    ///   - [`acl(ObjectCannedAcl)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::acl) / [`set_acl(Option<ObjectCannedAcl>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::set_acl):<br>required: **false**<br><p>The canned ACL to apply to the object. Amazon S3 supports a set of predefined ACLs, known as <i>canned ACLs</i>. Each canned ACL has a predefined set of grantees and permissions. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#CannedACL">Canned ACL</a> in the <i>Amazon S3 User Guide</i>.</p> <p>By default, all objects are private. Only the owner has full access control. When uploading an object, you can grant access permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the access control list (ACL) on the new object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/S3_ACLs_UsingACLs.html">Using ACLs</a>. One way to grant the permissions using the request headers is to specify a canned ACL with the <code>x-amz-acl</code> request header.</p><note>  <ul>   <li>    <p>This functionality is not supported for directory buckets.</p></li>   <li>    <p>This functionality is not supported for Amazon S3 on Outposts.</p></li>  </ul> </note><br>

    ///   - [`cache_control(impl Into<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::cache_control) / [`set_cache_control(Option<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::set_cache_control):<br>required: **false**<br><p>Specifies caching behavior along the request/reply chain.</p><br>

    ///   - [`content_disposition(impl Into<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::content_disposition) / [`set_content_disposition(Option<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::set_content_disposition):<br>required: **false**<br><p>Specifies presentational information for the object.</p><br>

    ///   - [`content_encoding(impl Into<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::content_encoding) / [`set_content_encoding(Option<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::set_content_encoding):<br>required: **false**<br><p>Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.</p><note>  <p>For directory buckets, only the <code>aws-chunked</code> value is supported in this header field.</p> </note><br>

    ///   - [`content_language(impl Into<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::content_language) / [`set_content_language(Option<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::set_content_language):<br>required: **false**<br><p>The language that the content is in.</p><br>

    ///   - [`content_type(impl Into<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::content_type) / [`set_content_type(Option<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::set_content_type):<br>required: **false**<br><p>A standard MIME type describing the format of the object data.</p><br>

    ///   - [`expires(DateTime)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::expires) / [`set_expires(Option<DateTime>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::set_expires):<br>required: **false**<br><p>The date and time at which the object is no longer cacheable.</p><br>

    ///   - [`grant_full_control(impl Into<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::grant_full_control) / [`set_grant_full_control(Option<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::set_grant_full_control):<br>required: **false**<br><p>Specify access permissions explicitly to give the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.</p> <p>By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html">Access Control List (ACL) Overview</a> in the <i>Amazon S3 User Guide</i>.</p> <p>You specify each grantee as a type=value pair, where the type is one of the following:</p> <ul>  <li>   <p><code>id</code> – if the value specified is the canonical user ID of an Amazon Web Services account</p></li>  <li>   <p><code>uri</code> – if you are granting permissions to a predefined group</p></li>  <li>   <p><code>emailAddress</code> – if the value specified is the email address of an Amazon Web Services account</p><note>    <p>Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:</p>    <ul>     <li>      <p>US East (N. Virginia)</p></li>     <li>      <p>US West (N. California)</p></li>     <li>      <p>US West (Oregon)</p></li>     <li>      <p>Asia Pacific (Singapore)</p></li>     <li>      <p>Asia Pacific (Sydney)</p></li>     <li>      <p>Asia Pacific (Tokyo)</p></li>     <li>      <p>Europe (Ireland)</p></li>     <li>      <p>South America (São Paulo)</p></li>    </ul>    <p>For a list of all the Amazon S3 supported Regions and endpoints, see <a href="https://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region">Regions and Endpoints</a> in the Amazon Web Services General Reference.</p>   </note></li> </ul> <p>For example, the following <code>x-amz-grant-read</code> header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:</p> <p><code>x-amz-grant-read: id="11112222333", id="444455556666" </code></p><note>  <ul>   <li>    <p>This functionality is not supported for directory buckets.</p></li>   <li>    <p>This functionality is not supported for Amazon S3 on Outposts.</p></li>  </ul> </note><br>

    ///   - [`grant_read(impl Into<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::grant_read) / [`set_grant_read(Option<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::set_grant_read):<br>required: **false**<br><p>Specify access permissions explicitly to allow grantee to read the object data and its metadata.</p> <p>By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html">Access Control List (ACL) Overview</a> in the <i>Amazon S3 User Guide</i>.</p> <p>You specify each grantee as a type=value pair, where the type is one of the following:</p> <ul>  <li>   <p><code>id</code> – if the value specified is the canonical user ID of an Amazon Web Services account</p></li>  <li>   <p><code>uri</code> – if you are granting permissions to a predefined group</p></li>  <li>   <p><code>emailAddress</code> – if the value specified is the email address of an Amazon Web Services account</p><note>    <p>Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:</p>    <ul>     <li>      <p>US East (N. Virginia)</p></li>     <li>      <p>US West (N. California)</p></li>     <li>      <p>US West (Oregon)</p></li>     <li>      <p>Asia Pacific (Singapore)</p></li>     <li>      <p>Asia Pacific (Sydney)</p></li>     <li>      <p>Asia Pacific (Tokyo)</p></li>     <li>      <p>Europe (Ireland)</p></li>     <li>      <p>South America (São Paulo)</p></li>    </ul>    <p>For a list of all the Amazon S3 supported Regions and endpoints, see <a href="https://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region">Regions and Endpoints</a> in the Amazon Web Services General Reference.</p>   </note></li> </ul> <p>For example, the following <code>x-amz-grant-read</code> header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:</p> <p><code>x-amz-grant-read: id="11112222333", id="444455556666" </code></p><note>  <ul>   <li>    <p>This functionality is not supported for directory buckets.</p></li>   <li>    <p>This functionality is not supported for Amazon S3 on Outposts.</p></li>  </ul> </note><br>

    ///   - [`grant_read_acp(impl Into<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::grant_read_acp) / [`set_grant_read_acp(Option<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::set_grant_read_acp):<br>required: **false**<br><p>Specify access permissions explicitly to allows grantee to read the object ACL.</p> <p>By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html">Access Control List (ACL) Overview</a> in the <i>Amazon S3 User Guide</i>.</p> <p>You specify each grantee as a type=value pair, where the type is one of the following:</p> <ul>  <li>   <p><code>id</code> – if the value specified is the canonical user ID of an Amazon Web Services account</p></li>  <li>   <p><code>uri</code> – if you are granting permissions to a predefined group</p></li>  <li>   <p><code>emailAddress</code> – if the value specified is the email address of an Amazon Web Services account</p><note>    <p>Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:</p>    <ul>     <li>      <p>US East (N. Virginia)</p></li>     <li>      <p>US West (N. California)</p></li>     <li>      <p>US West (Oregon)</p></li>     <li>      <p>Asia Pacific (Singapore)</p></li>     <li>      <p>Asia Pacific (Sydney)</p></li>     <li>      <p>Asia Pacific (Tokyo)</p></li>     <li>      <p>Europe (Ireland)</p></li>     <li>      <p>South America (São Paulo)</p></li>    </ul>    <p>For a list of all the Amazon S3 supported Regions and endpoints, see <a href="https://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region">Regions and Endpoints</a> in the Amazon Web Services General Reference.</p>   </note></li> </ul> <p>For example, the following <code>x-amz-grant-read</code> header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:</p> <p><code>x-amz-grant-read: id="11112222333", id="444455556666" </code></p><note>  <ul>   <li>    <p>This functionality is not supported for directory buckets.</p></li>   <li>    <p>This functionality is not supported for Amazon S3 on Outposts.</p></li>  </ul> </note><br>

    ///   - [`grant_write_acp(impl Into<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::grant_write_acp) / [`set_grant_write_acp(Option<String>)`](crate::operation::create_multipart_upload::builders::CreateMultipartUploadFluentBuilder::set_grant_write_acp):<br>required: **false**<br><p>Specify access permissions explicitly to allows grantee to allow grantee to write the ACL for the applicable object.</p> <p>By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html">Access Control List (ACL) Overview</a> in the <i>Amazon S3 User Guide</i>.</p> <p>You specify each grantee as a type=value pair, where the type is one of the following:</p> <ul>  <li>   <p><code>id</code> – if the value specified is the canonical user ID of an Amazon Web Services account</p></li>  <li>   <p><code>uri</code> – if you are granting permissions to a predefined group</p></li>  <li>   <p><code>emailAddress</code> – if the value specified is the email address of an Amazon Web Services account</p><note>    <p>Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:</p>    <ul>     <li>      <p>US East (N. Virginia)</p></li>     <li>      <p>US West (N. California)</p></li>     <li>      <p>US West (Oregon)</p></li>     <li>      <p>Asia Pacific (Singapore)</p></li>     <li>      <p>Asia Pacific (Sydney)</p></li>     <li>      <p>Asia Pacific (Tokyo)</p></li>     <li>      <p>Europe (Ireland)</p></li>     <li>      <p>South America (São Paulo)</p></li>    </ul>    <p>For a list of all the Amazon S3 supported Regions and endpoints, see <a href="https://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region">Regions and Endpoints</a> in the Amazon Web Services General Reference.</p>   </note></li> </ul> <p>For example, the following <code>x-amz-grant-read</code> header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:</p> <p><code>x-amz-grant-read: id="11112222333", id="444455556666" </code></p><note>  <ul>   <li>    <p>This functionality is not supported for directory buckets.</p></li>   <li>    <p>This functionality is not supported for Amazon S3 on Outposts.</p></li>  </ul> </note><br>

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl super::Client {

    /// Constructs a fluent builder for the [`DeleteBucket`](crate::operation::delete_bucket::builders::DeleteBucketFluentBuilder) operation.

    ///

    /// - The fluent builder is configurable:

    ///   - [`expected_bucket_owner(impl Into<String>)`](crate::operation::delete_bucket::builders::DeleteBucketFluentBuilder::expected_bucket_owner) / [`set_expected_bucket_owner(Option<String>)`](crate::operation::delete_bucket::builders::DeleteBucketFluentBuilder::set_expected_bucket_owner):<br>required: **false**<br><p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p><note>  <p>For directory buckets, this header is not supported in this API operation. If you specify this header, the request fails with the HTTP status code <code>501 Not Implemented</code>.</p> </note><br>

    /// - On success, responds with [`DeleteBucketOutput`](crate::operation::delete_bucket::DeleteBucketOutput)

    /// - On failure, responds with [`SdkError<DeleteBucketError>`](crate::operation::delete_bucket::DeleteBucketError)

    pub fn delete_bucket(&self) -> crate::operation::delete_bucket::builders::DeleteBucketFluentBuilder {

        crate::operation::delete_bucket::builders::DeleteBucketFluentBuilder::new(self.handle.clone())

    }

}

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl super::Client {

    /// Constructs a fluent builder for the [`DeleteBucketPolicy`](crate::operation::delete_bucket_policy::builders::DeleteBucketPolicyFluentBuilder) operation.

    ///

    /// - The fluent builder is configurable:

    ///   - [`expected_bucket_owner(impl Into<String>)`](crate::operation::delete_bucket_policy::builders::DeleteBucketPolicyFluentBuilder::expected_bucket_owner) / [`set_expected_bucket_owner(Option<String>)`](crate::operation::delete_bucket_policy::builders::DeleteBucketPolicyFluentBuilder::set_expected_bucket_owner):<br>required: **false**<br><p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p><note>  <p>For directory buckets, this header is not supported in this API operation. If you specify this header, the request fails with the HTTP status code <code>501 Not Implemented</code>.</p> </note><br>

    /// - On success, responds with [`DeleteBucketPolicyOutput`](crate::operation::delete_bucket_policy::DeleteBucketPolicyOutput)

    /// - On failure, responds with [`SdkError<DeleteBucketPolicyError>`](crate::operation::delete_bucket_policy::DeleteBucketPolicyError)

    pub fn delete_bucket_policy(&self) -> crate::operation::delete_bucket_policy::builders::DeleteBucketPolicyFluentBuilder {

        crate::operation::delete_bucket_policy::builders::DeleteBucketPolicyFluentBuilder::new(self.handle.clone())

    }

}

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl super::Client {

    /// Constructs a fluent builder for the [`DeleteObject`](crate::operation::delete_object::builders::DeleteObjectFluentBuilder) operation.

    ///

    /// - The fluent builder is configurable:

    ///   - [`key(impl Into<String>)`](crate::operation::delete_object::builders::DeleteObjectFluentBuilder::key) / [`set_key(Option<String>)`](crate::operation::delete_object::builders::DeleteObjectFluentBuilder::set_key):<br>required: **true**<br><p>Key name of the object to delete.</p><br>

    ///   - [`mfa(impl Into<String>)`](crate::operation::delete_object::builders::DeleteObjectFluentBuilder::mfa) / [`set_mfa(Option<String>)`](crate::operation::delete_object::builders::DeleteObjectFluentBuilder::set_mfa):<br>required: **false**<br><p>The concatenation of the authentication device's serial number, a space, and the value that is displayed on your authentication device. Required to permanently delete a versioned object if versioning is configured with MFA delete enabled.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`version_id(impl Into<String>)`](crate::operation::delete_object::builders::DeleteObjectFluentBuilder::version_id) / [`set_version_id(Option<String>)`](crate::operation::delete_object::builders::DeleteObjectFluentBuilder::set_version_id):<br>required: **false**<br><p>Version ID used to reference a specific version of the object.</p><note>  <p>For directory buckets in this API operation, only the <code>null</code> value of the version ID is supported.</p> </note><br>

    ///   - [`request_payer(RequestPayer)`](crate::operation::delete_object::builders::DeleteObjectFluentBuilder::request_payer) / [`set_request_payer(Option<RequestPayer>)`](crate::operation::delete_object::builders::DeleteObjectFluentBuilder::set_request_payer):<br>required: **false**<br><p>Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html">Downloading Objects in Requester Pays Buckets</a> in the <i>Amazon S3 User Guide</i>.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`bypass_governance_retention(bool)`](crate::operation::delete_object::builders::DeleteObjectFluentBuilder::bypass_governance_retention) / [`set_bypass_governance_retention(Option<bool>)`](crate::operation::delete_object::builders::DeleteObjectFluentBuilder::set_bypass_governance_retention):<br>required: **false**<br><p>Indicates whether S3 Object Lock should bypass Governance-mode restrictions to process this operation. To use this header, you must have the <code>s3:BypassGovernanceRetention</code> permission.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`expected_bucket_owner(impl Into<String>)`](crate::operation::delete_object::builders::DeleteObjectFluentBuilder::expected_bucket_owner) / [`set_expected_bucket_owner(Option<String>)`](crate::operation::delete_object::builders::DeleteObjectFluentBuilder::set_expected_bucket_owner):<br>required: **false**<br><p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p><br>

    /// - On success, responds with [`DeleteObjectOutput`](crate::operation::delete_object::DeleteObjectOutput) with field(s):

    ///   - [`delete_marker(Option<bool>)`](crate::operation::delete_object::DeleteObjectOutput::delete_marker): <p>Indicates whether the specified object version that was permanently deleted was (true) or was not (false) a delete marker before deletion. In a simple DELETE, this header indicates whether (true) or not (false) the current version of the object is a delete marker.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note>

    ///   - [`version_id(Option<String>)`](crate::operation::delete_object::DeleteObjectOutput::version_id): <p>Returns the version ID of the delete marker created as a result of the DELETE operation.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note>

    ///   - [`request_charged(Option<RequestCharged>)`](crate::operation::delete_object::DeleteObjectOutput::request_charged): <p>If present, indicates that the requester was successfully charged for the request.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note>

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl super::Client {

    /// Constructs a fluent builder for the [`DeleteObjects`](crate::operation::delete_objects::builders::DeleteObjectsFluentBuilder) operation.

    ///

    /// - The fluent builder is configurable:

    ///   - [`delete(Delete)`](crate::operation::delete_objects::builders::DeleteObjectsFluentBuilder::delete) / [`set_delete(Option<Delete>)`](crate::operation::delete_objects::builders::DeleteObjectsFluentBuilder::set_delete):<br>required: **true**<br><p>Container for the request.</p><br>

    ///   - [`mfa(impl Into<String>)`](crate::operation::delete_objects::builders::DeleteObjectsFluentBuilder::mfa) / [`set_mfa(Option<String>)`](crate::operation::delete_objects::builders::DeleteObjectsFluentBuilder::set_mfa):<br>required: **false**<br><p>The concatenation of the authentication device's serial number, a space, and the value that is displayed on your authentication device. Required to permanently delete a versioned object if versioning is configured with MFA delete enabled.</p> <p>When performing the <code>DeleteObjects</code> operation on an MFA delete enabled bucket, which attempts to delete the specified versioned objects, you must include an MFA token. If you don't provide an MFA token, the entire request will fail, even if there are non-versioned objects that you are trying to delete. If you provide an invalid token, whether there are versioned object keys in the request or not, the entire Multi-Object Delete request will fail. For information about MFA Delete, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/Versioning.html#MultiFactorAuthenticationDelete"> MFA Delete</a> in the <i>Amazon S3 User Guide</i>.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`request_payer(RequestPayer)`](crate::operation::delete_objects::builders::DeleteObjectsFluentBuilder::request_payer) / [`set_request_payer(Option<RequestPayer>)`](crate::operation::delete_objects::builders::DeleteObjectsFluentBuilder::set_request_payer):<br>required: **false**<br><p>Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html">Downloading Objects in Requester Pays Buckets</a> in the <i>Amazon S3 User Guide</i>.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`bypass_governance_retention(bool)`](crate::operation::delete_objects::builders::DeleteObjectsFluentBuilder::bypass_governance_retention) / [`set_bypass_governance_retention(Option<bool>)`](crate::operation::delete_objects::builders::DeleteObjectsFluentBuilder::set_bypass_governance_retention):<br>required: **false**<br><p>Specifies whether you want to delete this object even if it has a Governance-type Object Lock in place. To use this header, you must have the <code>s3:BypassGovernanceRetention</code> permission.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`expected_bucket_owner(impl Into<String>)`](crate::operation::delete_objects::builders::DeleteObjectsFluentBuilder::expected_bucket_owner) / [`set_expected_bucket_owner(Option<String>)`](crate::operation::delete_objects::builders::DeleteObjectsFluentBuilder::set_expected_bucket_owner):<br>required: **false**<br><p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p><br>

    ///   - [`checksum_algorithm(ChecksumAlgorithm)`](crate::operation::delete_objects::builders::DeleteObjectsFluentBuilder::checksum_algorithm) / [`set_checksum_algorithm(Option<ChecksumAlgorithm>)`](crate::operation::delete_objects::builders::DeleteObjectsFluentBuilder::set_checksum_algorithm):<br>required: **false**<br><p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum-<i>algorithm</i> </code> or <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>.</p> <p>For the <code>x-amz-checksum-<i>algorithm</i> </code> header, replace <code> <i>algorithm</i> </code> with the supported algorithm from the following list:</p> <ul>  <li>   <p>CRC32</p></li>  <li>   <p>CRC32C</p></li>  <li>   <p>SHA1</p></li>  <li>   <p>SHA256</p></li> </ul> <p>For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p> <p>If the individual checksum value you provide through <code>x-amz-checksum-<i>algorithm</i> </code> doesn't match the checksum algorithm you set through <code>x-amz-sdk-checksum-algorithm</code>, Amazon S3 ignores any provided <code>ChecksumAlgorithm</code> parameter and uses the checksum algorithm that matches the provided value in <code>x-amz-checksum-<i>algorithm</i> </code>.</p> <p>If you provide an individual checksum, Amazon S3 ignores any provided <code>ChecksumAlgorithm</code> parameter.</p><br>

    /// - On success, responds with [`DeleteObjectsOutput`](crate::operation::delete_objects::DeleteObjectsOutput) with field(s):

    ///   - [`deleted(Option<Vec::<DeletedObject>>)`](crate::operation::delete_objects::DeleteObjectsOutput::deleted): <p>Container element for a successful delete. It identifies the object that was successfully deleted.</p>

    ///   - [`request_charged(Option<RequestCharged>)`](crate::operation::delete_objects::DeleteObjectsOutput::request_charged): <p>If present, indicates that the requester was successfully charged for the request.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note>

    ///   - [`errors(Option<Vec::<Error>>)`](crate::operation::delete_objects::DeleteObjectsOutput::errors): <p>Container for a failed delete action that describes the object that Amazon S3 attempted to delete and the error it encountered.</p>

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl super::Client {

    /// Constructs a fluent builder for the [`GetBucketPolicy`](crate::operation::get_bucket_policy::builders::GetBucketPolicyFluentBuilder) operation.

    ///

    /// - The fluent builder is configurable:

    ///   - [`expected_bucket_owner(impl Into<String>)`](crate::operation::get_bucket_policy::builders::GetBucketPolicyFluentBuilder::expected_bucket_owner) / [`set_expected_bucket_owner(Option<String>)`](crate::operation::get_bucket_policy::builders::GetBucketPolicyFluentBuilder::set_expected_bucket_owner):<br>required: **false**<br><p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p><note>  <p>For directory buckets, this header is not supported in this API operation. If you specify this header, the request fails with the HTTP status code <code>501 Not Implemented</code>.</p> </note><br>

    /// - On success, responds with [`GetBucketPolicyOutput`](crate::operation::get_bucket_policy::GetBucketPolicyOutput) with field(s):

    ///   - [`policy(Option<String>)`](crate::operation::get_bucket_policy::GetBucketPolicyOutput::policy): <p>The bucket policy as a JSON document.</p>

    /// - On failure, responds with [`SdkError<GetBucketPolicyError>`](crate::operation::get_bucket_policy::GetBucketPolicyError)

    pub fn get_bucket_policy(&self) -> crate::operation::get_bucket_policy::builders::GetBucketPolicyFluentBuilder {

        crate::operation::get_bucket_policy::builders::GetBucketPolicyFluentBuilder::new(self.handle.clone())

    }

}

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl super::Client {

    /// Constructs a fluent builder for the [`GetObject`](crate::operation::get_object::builders::GetObjectFluentBuilder) operation.

    ///

    /// - The fluent builder is configurable:

    ///   - [`if_match(impl Into<String>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::if_match) / [`set_if_match(Option<String>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::set_if_match):<br>required: **false**<br><p>Return the object only if its entity tag (ETag) is the same as the one specified in this header; otherwise, return a <code>412 Precondition Failed</code> error.</p> <p>If both of the <code>If-Match</code> and <code>If-Unmodified-Since</code> headers are present in the request as follows: <code>If-Match</code> condition evaluates to <code>true</code>, and; <code>If-Unmodified-Since</code> condition evaluates to <code>false</code>; then, S3 returns <code>200 OK</code> and the data requested.</p> <p>For more information about conditional requests, see <a href="https://tools.ietf.org/html/rfc7232">RFC 7232</a>.</p><br>

    ///   - [`if_modified_since(DateTime)`](crate::operation::get_object::builders::GetObjectFluentBuilder::if_modified_since) / [`set_if_modified_since(Option<DateTime>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::set_if_modified_since):<br>required: **false**<br><p>Return the object only if it has been modified since the specified time; otherwise, return a <code>304 Not Modified</code> error.</p> <p>If both of the <code>If-None-Match</code> and <code>If-Modified-Since</code> headers are present in the request as follows:<code> If-None-Match</code> condition evaluates to <code>false</code>, and; <code>If-Modified-Since</code> condition evaluates to <code>true</code>; then, S3 returns <code>304 Not Modified</code> status code.</p> <p>For more information about conditional requests, see <a href="https://tools.ietf.org/html/rfc7232">RFC 7232</a>.</p><br>

    ///   - [`if_none_match(impl Into<String>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::if_none_match) / [`set_if_none_match(Option<String>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::set_if_none_match):<br>required: **false**<br><p>Return the object only if its entity tag (ETag) is different from the one specified in this header; otherwise, return a <code>304 Not Modified</code> error.</p> <p>If both of the <code>If-None-Match</code> and <code>If-Modified-Since</code> headers are present in the request as follows:<code> If-None-Match</code> condition evaluates to <code>false</code>, and; <code>If-Modified-Since</code> condition evaluates to <code>true</code>; then, S3 returns <code>304 Not Modified</code> HTTP status code.</p> <p>For more information about conditional requests, see <a href="https://tools.ietf.org/html/rfc7232">RFC 7232</a>.</p><br>

    ///   - [`if_unmodified_since(DateTime)`](crate::operation::get_object::builders::GetObjectFluentBuilder::if_unmodified_since) / [`set_if_unmodified_since(Option<DateTime>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::set_if_unmodified_since):<br>required: **false**<br><p>Return the object only if it has not been modified since the specified time; otherwise, return a <code>412 Precondition Failed</code> error.</p> <p>If both of the <code>If-Match</code> and <code>If-Unmodified-Since</code> headers are present in the request as follows: <code>If-Match</code> condition evaluates to <code>true</code>, and; <code>If-Unmodified-Since</code> condition evaluates to <code>false</code>; then, S3 returns <code>200 OK</code> and the data requested.</p> <p>For more information about conditional requests, see <a href="https://tools.ietf.org/html/rfc7232">RFC 7232</a>.</p><br>

    ///   - [`key(impl Into<String>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::key) / [`set_key(Option<String>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::set_key):<br>required: **true**<br><p>Key of the object to get.</p><br>

    ///   - [`range(impl Into<String>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::range) / [`set_range(Option<String>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::set_range):<br>required: **false**<br><p>Downloads the specified byte range of an object. For more information about the HTTP Range header, see <a href="https://www.rfc-editor.org/rfc/rfc9110.html#name-range">https://www.rfc-editor.org/rfc/rfc9110.html#name-range</a>.</p><note>  <p>Amazon S3 doesn't support retrieving multiple ranges of data per <code>GET</code> request.</p> </note><br>

    ///   - [`response_cache_control(impl Into<String>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::response_cache_control) / [`set_response_cache_control(Option<String>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::set_response_cache_control):<br>required: **false**<br><p>Sets the <code>Cache-Control</code> header of the response.</p><br>

    ///   - [`response_content_disposition(impl Into<String>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::response_content_disposition) / [`set_response_content_disposition(Option<String>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::set_response_content_disposition):<br>required: **false**<br><p>Sets the <code>Content-Disposition</code> header of the response.</p><br>

    ///   - [`response_content_encoding(impl Into<String>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::response_content_encoding) / [`set_response_content_encoding(Option<String>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::set_response_content_encoding):<br>required: **false**<br><p>Sets the <code>Content-Encoding</code> header of the response.</p><br>

    ///   - [`response_content_language(impl Into<String>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::response_content_language) / [`set_response_content_language(Option<String>)`](crate::operation::get_object::builders::GetObjectFluentBuilder::set_response_content_language):<br>required: **false**<br><p>Sets the <code>Content-Language</code> header of the response.</p><br>

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl super::Client {

    /// Constructs a fluent builder for the [`GetObjectAttributes`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder) operation.

    ///

    /// - The fluent builder is configurable:

    ///   - [`key(impl Into<String>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::key) / [`set_key(Option<String>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::set_key):<br>required: **true**<br><p>The object key.</p><br>

    ///   - [`version_id(impl Into<String>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::version_id) / [`set_version_id(Option<String>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::set_version_id):<br>required: **false**<br><p>The version ID used to reference a specific version of the object.</p><note>  <p>S3 Versioning isn't enabled and supported for directory buckets. For this API operation, only the <code>null</code> value of the version ID is supported by directory buckets. You can only specify <code>null</code> to the <code>versionId</code> query parameter in the request.</p> </note><br>

    ///   - [`max_parts(i32)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::max_parts) / [`set_max_parts(Option<i32>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::set_max_parts):<br>required: **false**<br><p>Sets the maximum number of parts to return.</p><br>

    ///   - [`part_number_marker(impl Into<String>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::part_number_marker) / [`set_part_number_marker(Option<String>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::set_part_number_marker):<br>required: **false**<br><p>Specifies the part after which listing should begin. Only parts with higher part numbers will be listed.</p><br>

    ///   - [`sse_customer_algorithm(impl Into<String>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::sse_customer_algorithm) / [`set_sse_customer_algorithm(Option<String>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::set_sse_customer_algorithm):<br>required: **false**<br><p>Specifies the algorithm to use when encrypting the object (for example, AES256).</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`sse_customer_key(impl Into<String>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::sse_customer_key) / [`set_sse_customer_key(Option<String>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::set_sse_customer_key):<br>required: **false**<br><p>Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the <code>x-amz-server-side-encryption-customer-algorithm</code> header.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`sse_customer_key_md5(impl Into<String>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::sse_customer_key_md5) / [`set_sse_customer_key_md5(Option<String>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::set_sse_customer_key_md5):<br>required: **false**<br><p>Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`request_payer(RequestPayer)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::request_payer) / [`set_request_payer(Option<RequestPayer>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::set_request_payer):<br>required: **false**<br><p>Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html">Downloading Objects in Requester Pays Buckets</a> in the <i>Amazon S3 User Guide</i>.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`expected_bucket_owner(impl Into<String>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::expected_bucket_owner) / [`set_expected_bucket_owner(Option<String>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::set_expected_bucket_owner):<br>required: **false**<br><p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p><br>

    ///   - [`object_attributes(ObjectAttributes)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::object_attributes) / [`set_object_attributes(Option<Vec::<ObjectAttributes>>)`](crate::operation::get_object_attributes::builders::GetObjectAttributesFluentBuilder::set_object_attributes):<br>required: **true**<br><p>Specifies the fields at the root level that you want returned in the response. Fields that you do not specify are not returned.</p><br>

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl super::Client {

    /// Constructs a fluent builder for the [`HeadBucket`](crate::operation::head_bucket::builders::HeadBucketFluentBuilder) operation.

    ///

    /// - The fluent builder is configurable:

    ///   - [`expected_bucket_owner(impl Into<String>)`](crate::operation::head_bucket::builders::HeadBucketFluentBuilder::expected_bucket_owner) / [`set_expected_bucket_owner(Option<String>)`](crate::operation::head_bucket::builders::HeadBucketFluentBuilder::set_expected_bucket_owner):<br>required: **false**<br><p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p><br>

    /// - On success, responds with [`HeadBucketOutput`](crate::operation::head_bucket::HeadBucketOutput) with field(s):

    ///   - [`bucket_location_type(Option<LocationType>)`](crate::operation::head_bucket::HeadBucketOutput::bucket_location_type): <p>The type of location where the bucket is created.</p><note>  <p>This functionality is only supported by directory buckets.</p> </note>

    ///   - [`bucket_region(Option<String>)`](crate::operation::head_bucket::HeadBucketOutput::bucket_region): <p>The Region that the bucket is located.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note>

    ///   - [`access_point_alias(Option<bool>)`](crate::operation::head_bucket::HeadBucketOutput::access_point_alias): <p>Indicates whether the bucket name used in the request is an access point alias.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note>

    /// - On failure, responds with [`SdkError<HeadBucketError>`](crate::operation::head_bucket::HeadBucketError)

    pub fn head_bucket(&self) -> crate::operation::head_bucket::builders::HeadBucketFluentBuilder {

        crate::operation::head_bucket::builders::HeadBucketFluentBuilder::new(self.handle.clone())

    }

}

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl super::Client {

    /// Constructs a fluent builder for the [`HeadObject`](crate::operation::head_object::builders::HeadObjectFluentBuilder) operation.

    ///

    /// - The fluent builder is configurable:

    ///   - [`if_match(impl Into<String>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::if_match) / [`set_if_match(Option<String>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::set_if_match):<br>required: **false**<br><p>Return the object only if its entity tag (ETag) is the same as the one specified; otherwise, return a 412 (precondition failed) error.</p> <p>If both of the <code>If-Match</code> and <code>If-Unmodified-Since</code> headers are present in the request as follows:</p> <ul>  <li>   <p><code>If-Match</code> condition evaluates to <code>true</code>, and;</p></li>  <li>   <p><code>If-Unmodified-Since</code> condition evaluates to <code>false</code>;</p></li> </ul> <p>Then Amazon S3 returns <code>200 OK</code> and the data requested.</p> <p>For more information about conditional requests, see <a href="https://tools.ietf.org/html/rfc7232">RFC 7232</a>.</p><br>

    ///   - [`if_modified_since(DateTime)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::if_modified_since) / [`set_if_modified_since(Option<DateTime>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::set_if_modified_since):<br>required: **false**<br><p>Return the object only if it has been modified since the specified time; otherwise, return a 304 (not modified) error.</p> <p>If both of the <code>If-None-Match</code> and <code>If-Modified-Since</code> headers are present in the request as follows:</p> <ul>  <li>   <p><code>If-None-Match</code> condition evaluates to <code>false</code>, and;</p></li>  <li>   <p><code>If-Modified-Since</code> condition evaluates to <code>true</code>;</p></li> </ul> <p>Then Amazon S3 returns the <code>304 Not Modified</code> response code.</p> <p>For more information about conditional requests, see <a href="https://tools.ietf.org/html/rfc7232">RFC 7232</a>.</p><br>

    ///   - [`if_none_match(impl Into<String>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::if_none_match) / [`set_if_none_match(Option<String>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::set_if_none_match):<br>required: **false**<br><p>Return the object only if its entity tag (ETag) is different from the one specified; otherwise, return a 304 (not modified) error.</p> <p>If both of the <code>If-None-Match</code> and <code>If-Modified-Since</code> headers are present in the request as follows:</p> <ul>  <li>   <p><code>If-None-Match</code> condition evaluates to <code>false</code>, and;</p></li>  <li>   <p><code>If-Modified-Since</code> condition evaluates to <code>true</code>;</p></li> </ul> <p>Then Amazon S3 returns the <code>304 Not Modified</code> response code.</p> <p>For more information about conditional requests, see <a href="https://tools.ietf.org/html/rfc7232">RFC 7232</a>.</p><br>

    ///   - [`if_unmodified_since(DateTime)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::if_unmodified_since) / [`set_if_unmodified_since(Option<DateTime>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::set_if_unmodified_since):<br>required: **false**<br><p>Return the object only if it has not been modified since the specified time; otherwise, return a 412 (precondition failed) error.</p> <p>If both of the <code>If-Match</code> and <code>If-Unmodified-Since</code> headers are present in the request as follows:</p> <ul>  <li>   <p><code>If-Match</code> condition evaluates to <code>true</code>, and;</p></li>  <li>   <p><code>If-Unmodified-Since</code> condition evaluates to <code>false</code>;</p></li> </ul> <p>Then Amazon S3 returns <code>200 OK</code> and the data requested.</p> <p>For more information about conditional requests, see <a href="https://tools.ietf.org/html/rfc7232">RFC 7232</a>.</p><br>

    ///   - [`key(impl Into<String>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::key) / [`set_key(Option<String>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::set_key):<br>required: **true**<br><p>The object key.</p><br>

    ///   - [`range(impl Into<String>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::range) / [`set_range(Option<String>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::set_range):<br>required: **false**<br><p>HeadObject returns only the metadata for an object. If the Range is satisfiable, only the <code>ContentLength</code> is affected in the response. If the Range is not satisfiable, S3 returns a <code>416 - Requested Range Not Satisfiable</code> error.</p><br>

    ///   - [`version_id(impl Into<String>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::version_id) / [`set_version_id(Option<String>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::set_version_id):<br>required: **false**<br><p>Version ID used to reference a specific version of the object.</p><note>  <p>For directory buckets in this API operation, only the <code>null</code> value of the version ID is supported.</p> </note><br>

    ///   - [`sse_customer_algorithm(impl Into<String>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::sse_customer_algorithm) / [`set_sse_customer_algorithm(Option<String>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::set_sse_customer_algorithm):<br>required: **false**<br><p>Specifies the algorithm to use when encrypting the object (for example, AES256).</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`sse_customer_key(impl Into<String>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::sse_customer_key) / [`set_sse_customer_key(Option<String>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::set_sse_customer_key):<br>required: **false**<br><p>Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the <code>x-amz-server-side-encryption-customer-algorithm</code> header.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`sse_customer_key_md5(impl Into<String>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::sse_customer_key_md5) / [`set_sse_customer_key_md5(Option<String>)`](crate::operation::head_object::builders::HeadObjectFluentBuilder::set_sse_customer_key_md5):<br>required: **false**<br><p>Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl super::Client {

    /// Constructs a fluent builder for the [`ListMultipartUploads`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder) operation.

    ///

    /// - The fluent builder is configurable:

    ///   - [`delimiter(impl Into<String>)`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder::delimiter) / [`set_delimiter(Option<String>)`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder::set_delimiter):<br>required: **false**<br><p>Character you use to group keys.</p> <p>All keys that contain the same string between the prefix, if specified, and the first occurrence of the delimiter after the prefix are grouped under a single result element, <code>CommonPrefixes</code>. If you don't specify the prefix parameter, then the substring starts at the beginning of the key. The keys that are grouped under <code>CommonPrefixes</code> result element are not returned elsewhere in the response.</p><note>  <p><b>Directory buckets</b> - For directory buckets, <code>/</code> is the only supported delimiter.</p> </note><br>

    ///   - [`encoding_type(EncodingType)`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder::encoding_type) / [`set_encoding_type(Option<EncodingType>)`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder::set_encoding_type):<br>required: **false**<br><p>Requests Amazon S3 to encode the object keys in the response and specifies the encoding method to use. An object key can contain any Unicode character; however, the XML 1.0 parser cannot parse some characters, such as characters with an ASCII value from 0 to 10. For characters that are not supported in XML 1.0, you can add this parameter to request that Amazon S3 encode the keys in the response.</p><br>

    ///   - [`key_marker(impl Into<String>)`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder::key_marker) / [`set_key_marker(Option<String>)`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder::set_key_marker):<br>required: **false**<br><p>Specifies the multipart upload after which listing should begin.</p><note>  <ul>   <li>    <p><b>General purpose buckets</b> - For general purpose buckets, <code>key-marker</code> is an object key. Together with <code>upload-id-marker</code>, this parameter specifies the multipart upload after which listing should begin.</p>    <p>If <code>upload-id-marker</code> is not specified, only the keys lexicographically greater than the specified <code>key-marker</code> will be included in the list.</p>    <p>If <code>upload-id-marker</code> is specified, any multipart uploads for a key equal to the <code>key-marker</code> might also be included, provided those multipart uploads have upload IDs lexicographically greater than the specified <code>upload-id-marker</code>.</p></li>   <li>    <p><b>Directory buckets</b> - For directory buckets, <code>key-marker</code> is obfuscated and isn't a real object key. The <code>upload-id-marker</code> parameter isn't supported by directory buckets. To list the additional multipart uploads, you only need to set the value of <code>key-marker</code> to the <code>NextKeyMarker</code> value from the previous response.</p>    <p>In the <code>ListMultipartUploads</code> response, the multipart uploads aren't sorted lexicographically based on the object keys.</p></li>  </ul> </note><br>

    ///   - [`max_uploads(i32)`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder::max_uploads) / [`set_max_uploads(Option<i32>)`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder::set_max_uploads):<br>required: **false**<br><p>Sets the maximum number of multipart uploads, from 1 to 1,000, to return in the response body. 1,000 is the maximum number of uploads that can be returned in a response.</p><br>

    ///   - [`prefix(impl Into<String>)`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder::prefix) / [`set_prefix(Option<String>)`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder::set_prefix):<br>required: **false**<br><p>Lists in-progress uploads only for those keys that begin with the specified prefix. You can use prefixes to separate a bucket into different grouping of keys. (You can think of using <code>prefix</code> to make groups in the same way that you'd use a folder in a file system.)</p><note>  <p><b>Directory buckets</b> - For directory buckets, only prefixes that end in a delimiter (<code>/</code>) are supported.</p> </note><br>

    ///   - [`upload_id_marker(impl Into<String>)`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder::upload_id_marker) / [`set_upload_id_marker(Option<String>)`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder::set_upload_id_marker):<br>required: **false**<br><p>Together with key-marker, specifies the multipart upload after which listing should begin. If key-marker is not specified, the upload-id-marker parameter is ignored. Otherwise, any multipart uploads for a key equal to the key-marker might be included in the list only if they have an upload ID lexicographically greater than the specified <code>upload-id-marker</code>.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`expected_bucket_owner(impl Into<String>)`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder::expected_bucket_owner) / [`set_expected_bucket_owner(Option<String>)`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder::set_expected_bucket_owner):<br>required: **false**<br><p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p><br>

    ///   - [`request_payer(RequestPayer)`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder::request_payer) / [`set_request_payer(Option<RequestPayer>)`](crate::operation::list_multipart_uploads::builders::ListMultipartUploadsFluentBuilder::set_request_payer):<br>required: **false**<br><p>Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html">Downloading Objects in Requester Pays Buckets</a> in the <i>Amazon S3 User Guide</i>.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    /// - On success, responds with [`ListMultipartUploadsOutput`](crate::operation::list_multipart_uploads::ListMultipartUploadsOutput) with field(s):

    ///   - [`bucket(Option<String>)`](crate::operation::list_multipart_uploads::ListMultipartUploadsOutput::bucket): <p>The name of the bucket to which the multipart upload was initiated. Does not return the access point ARN or access point alias if used.</p>

    ///   - [`key_marker(Option<String>)`](crate::operation::list_multipart_uploads::ListMultipartUploadsOutput::key_marker): <p>The key at or after which the listing began.</p>

    ///   - [`next_key_marker(Option<String>)`](crate::operation::list_multipart_uploads::ListMultipartUploadsOutput::next_key_marker): <p>When a list is truncated, this element specifies the value that should be used for the key-marker request parameter in a subsequent request.</p>

    ///   - [`prefix(Option<String>)`](crate::operation::list_multipart_uploads::ListMultipartUploadsOutput::prefix): <p>When a prefix is provided in the request, this field contains the specified prefix. The result contains only keys starting with the specified prefix.</p><note>  <p><b>Directory buckets</b> - For directory buckets, only prefixes that end in a delimiter (<code>/</code>) are supported.</p> </note>

    ///   - [`delimiter(Option<String>)`](crate::operation::list_multipart_uploads::ListMultipartUploadsOutput::delimiter): <p>Contains the delimiter you specified in the request. If you don't specify a delimiter in your request, this element is absent from the response.</p><note>  <p><b>Directory buckets</b> - For directory buckets, <code>/</code> is the only supported delimiter.</p> </note>

    ///   - [`next_upload_id_marker(Option<String>)`](crate::operation::list_multipart_uploads::ListMultipartUploadsOutput::next_upload_id_marker): <p>When a list is truncated, this element specifies the value that should be used for the <code>upload-id-marker</code> request parameter in a subsequent request.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note>

    ///   - [`max_uploads(Option<i32>)`](crate::operation::list_multipart_uploads::ListMultipartUploadsOutput::max_uploads): <p>Maximum number of multipart uploads that could have been included in the response.</p>

    ///   - [`is_truncated(Option<bool>)`](crate::operation::list_multipart_uploads::ListMultipartUploadsOutput::is_truncated): <p>Indicates whether the returned list of multipart uploads is truncated. A value of true indicates that the list was truncated. The list can be truncated if the number of multipart uploads exceeds the limit allowed or specified by max uploads.</p>

    ///   - [`uploads(Option<Vec::<MultipartUpload>>)`](crate::operation::list_multipart_uploads::ListMultipartUploadsOutput::uploads): <p>Container for elements related to a particular multipart upload. A response can contain zero or more <code>Upload</code> elements.</p>

    ///   - [`common_prefixes(Option<Vec::<CommonPrefix>>)`](crate::operation::list_multipart_uploads::ListMultipartUploadsOutput::common_prefixes): <p>If you specify a delimiter in the request, then the result returns each distinct key prefix containing the delimiter in a <code>CommonPrefixes</code> element. The distinct key prefixes are returned in the <code>Prefix</code> child element.</p><note>  <p><b>Directory buckets</b> - For directory buckets, only prefixes that end in a delimiter (<code>/</code>) are supported.</p> </note>

    ///   - [`encoding_type(Option<EncodingType>)`](crate::operation::list_multipart_uploads::ListMultipartUploadsOutput::encoding_type): <p>Encoding type used by Amazon S3 to encode object keys in the response.</p> <p>If you specify the <code>encoding-type</code> request parameter, Amazon S3 includes this element in the response, and returns encoded key name values in the following response elements:</p> <p><code>Delimiter</code>, <code>KeyMarker</code>, <code>Prefix</code>, <code>NextKeyMarker</code>, <code>Key</code>.</p>

    ///   - [`request_charged(Option<RequestCharged>)`](crate::operation::list_multipart_uploads::ListMultipartUploadsOutput::request_charged): <p>If present, indicates that the requester was successfully charged for the request.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note>

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl super::Client {

    /// Constructs a fluent builder for the [`ListObjects`](crate::operation::list_objects::builders::ListObjectsFluentBuilder) operation.

    ///

    /// - The fluent builder is configurable:

    ///   - [`delimiter(impl Into<String>)`](crate::operation::list_objects::builders::ListObjectsFluentBuilder::delimiter) / [`set_delimiter(Option<String>)`](crate::operation::list_objects::builders::ListObjectsFluentBuilder::set_delimiter):<br>required: **false**<br><p>A delimiter is a character that you use to group keys.</p><br>

    ///   - [`encoding_type(EncodingType)`](crate::operation::list_objects::builders::ListObjectsFluentBuilder::encoding_type) / [`set_encoding_type(Option<EncodingType>)`](crate::operation::list_objects::builders::ListObjectsFluentBuilder::set_encoding_type):<br>required: **false**<br><p>Requests Amazon S3 to encode the object keys in the response and specifies the encoding method to use. An object key can contain any Unicode character; however, the XML 1.0 parser cannot parse some characters, such as characters with an ASCII value from 0 to 10. For characters that are not supported in XML 1.0, you can add this parameter to request that Amazon S3 encode the keys in the response.</p><br>

    ///   - [`marker(impl Into<String>)`](crate::operation::list_objects::builders::ListObjectsFluentBuilder::marker) / [`set_marker(Option<String>)`](crate::operation::list_objects::builders::ListObjectsFluentBuilder::set_marker):<br>required: **false**<br><p>Marker is where you want Amazon S3 to start listing from. Amazon S3 starts listing after this specified key. Marker can be any key in the bucket.</p><br>

    ///   - [`max_keys(i32)`](crate::operation::list_objects::builders::ListObjectsFluentBuilder::max_keys) / [`set_max_keys(Option<i32>)`](crate::operation::list_objects::builders::ListObjectsFluentBuilder::set_max_keys):<br>required: **false**<br><p>Sets the maximum number of keys returned in the response. By default, the action returns up to 1,000 key names. The response might contain fewer keys but will never contain more.</p><br>

    ///   - [`prefix(impl Into<String>)`](crate::operation::list_objects::builders::ListObjectsFluentBuilder::prefix) / [`set_prefix(Option<String>)`](crate::operation::list_objects::builders::ListObjectsFluentBuilder::set_prefix):<br>required: **false**<br><p>Limits the response to keys that begin with the specified prefix.</p><br>

    ///   - [`request_payer(RequestPayer)`](crate::operation::list_objects::builders::ListObjectsFluentBuilder::request_payer) / [`set_request_payer(Option<RequestPayer>)`](crate::operation::list_objects::builders::ListObjectsFluentBuilder::set_request_payer):<br>required: **false**<br><p>Confirms that the requester knows that she or he will be charged for the list objects request. Bucket owners need not specify this parameter in their requests.</p><br>

    ///   - [`expected_bucket_owner(impl Into<String>)`](crate::operation::list_objects::builders::ListObjectsFluentBuilder::expected_bucket_owner) / [`set_expected_bucket_owner(Option<String>)`](crate::operation::list_objects::builders::ListObjectsFluentBuilder::set_expected_bucket_owner):<br>required: **false**<br><p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p><br>

    ///   - [`optional_object_attributes(OptionalObjectAttributes)`](crate::operation::list_objects::builders::ListObjectsFluentBuilder::optional_object_attributes) / [`set_optional_object_attributes(Option<Vec::<OptionalObjectAttributes>>)`](crate::operation::list_objects::builders::ListObjectsFluentBuilder::set_optional_object_attributes):<br>required: **false**<br><p>Specifies the optional fields that you want returned in the response. Fields that you do not specify are not returned.</p><br>

    /// - On success, responds with [`ListObjectsOutput`](crate::operation::list_objects::ListObjectsOutput) with field(s):

    ///   - [`is_truncated(Option<bool>)`](crate::operation::list_objects::ListObjectsOutput::is_truncated): <p>A flag that indicates whether Amazon S3 returned all of the results that satisfied the search criteria.</p>

    ///   - [`marker(Option<String>)`](crate::operation::list_objects::ListObjectsOutput::marker): <p>Indicates where in the bucket listing begins. Marker is included in the response if it was sent with the request.</p>

    ///   - [`next_marker(Option<String>)`](crate::operation::list_objects::ListObjectsOutput::next_marker): <p>When the response is truncated (the <code>IsTruncated</code> element value in the response is <code>true</code>), you can use the key name in this field as the <code>marker</code> parameter in the subsequent request to get the next set of objects. Amazon S3 lists objects in alphabetical order.</p><note>  <p>This element is returned only if you have the <code>delimiter</code> request parameter specified. If the response does not include the <code>NextMarker</code> element and it is truncated, you can use the value of the last <code>Key</code> element in the response as the <code>marker</code> parameter in the subsequent request to get the next set of object keys.</p> </note>

    ///   - [`contents(Option<Vec::<Object>>)`](crate::operation::list_objects::ListObjectsOutput::contents): <p>Metadata about each object returned.</p>

    ///   - [`name(Option<String>)`](crate::operation::list_objects::ListObjectsOutput::name): <p>The bucket name.</p>

    ///   - [`prefix(Option<String>)`](crate::operation::list_objects::ListObjectsOutput::prefix): <p>Keys that begin with the indicated prefix.</p>

    ///   - [`delimiter(Option<String>)`](crate::operation::list_objects::ListObjectsOutput::delimiter): <p>Causes keys that contain the same string between the prefix and the first occurrence of the delimiter to be rolled up into a single result element in the <code>CommonPrefixes</code> collection. These rolled-up keys are not returned elsewhere in the response. Each rolled-up result counts as only one return against the <code>MaxKeys</code> value.</p>

    ///   - [`max_keys(Option<i32>)`](crate::operation::list_objects::ListObjectsOutput::max_keys): <p>The maximum number of keys returned in the response body.</p>

    ///   - [`common_prefixes(Option<Vec::<CommonPrefix>>)`](crate::operation::list_objects::ListObjectsOutput::common_prefixes): <p>All of the keys (up to 1,000) rolled up in a common prefix count as a single return when calculating the number of returns.</p> <p>A response can contain <code>CommonPrefixes</code> only if you specify a delimiter.</p> <p><code>CommonPrefixes</code> contains all (if there are any) keys between <code>Prefix</code> and the next occurrence of the string specified by the delimiter.</p> <p><code>CommonPrefixes</code> lists keys that act like subdirectories in the directory specified by <code>Prefix</code>.</p> <p>For example, if the prefix is <code>notes/</code> and the delimiter is a slash (<code>/</code>), as in <code>notes/summer/july</code>, the common prefix is <code>notes/summer/</code>. All of the keys that roll up into a common prefix count as a single return when calculating the number of returns.</p>

    ///   - [`request_charged(Option<RequestCharged>)`](crate::operation::list_objects::ListObjectsOutput::request_charged): <p>If present, indicates that the requester was successfully charged for the request.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note>

    /// - On failure, responds with [`SdkError<ListObjectsError>`](crate::operation::list_objects::ListObjectsError)

    pub fn list_objects(&self) -> crate::operation::list_objects::builders::ListObjectsFluentBuilder {

        crate::operation::list_objects::builders::ListObjectsFluentBuilder::new(self.handle.clone())

    }

}

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl super::Client {

    /// Constructs a fluent builder for the [`ListObjectsV2`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder) operation.

    /// This operation supports pagination; See [`into_paginator()`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::into_paginator).

    ///

    /// - The fluent builder is configurable:

    ///   - [`delimiter(impl Into<String>)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::delimiter) / [`set_delimiter(Option<String>)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::set_delimiter):<br>required: **false**<br><p>A delimiter is a character that you use to group keys.</p><note>  <ul>   <li>    <p><b>Directory buckets</b> - For directory buckets, <code>/</code> is the only supported delimiter.</p></li>   <li>    <p><b>Directory buckets </b> - When you query <code>ListObjectsV2</code> with a delimiter during in-progress multipart uploads, the <code>CommonPrefixes</code> response parameter contains the prefixes that are associated with the in-progress multipart uploads. For more information about multipart uploads, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuoverview.html">Multipart Upload Overview</a> in the <i>Amazon S3 User Guide</i>.</p></li>  </ul> </note><br>

    ///   - [`max_keys(i32)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::max_keys) / [`set_max_keys(Option<i32>)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::set_max_keys):<br>required: **false**<br><p>Sets the maximum number of keys returned in the response. By default, the action returns up to 1,000 key names. The response might contain fewer keys but will never contain more.</p><br>

    ///   - [`prefix(impl Into<String>)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::prefix) / [`set_prefix(Option<String>)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::set_prefix):<br>required: **false**<br><p>Limits the response to keys that begin with the specified prefix.</p><note>  <p><b>Directory buckets</b> - For directory buckets, only prefixes that end in a delimiter (<code>/</code>) are supported.</p> </note><br>

    ///   - [`continuation_token(impl Into<String>)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::continuation_token) / [`set_continuation_token(Option<String>)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::set_continuation_token):<br>required: **false**<br><p><code>ContinuationToken</code> indicates to Amazon S3 that the list is being continued on this bucket with a token. <code>ContinuationToken</code> is obfuscated and is not a real key. You can use this <code>ContinuationToken</code> for pagination of the list results.</p><br>

    ///   - [`fetch_owner(bool)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::fetch_owner) / [`set_fetch_owner(Option<bool>)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::set_fetch_owner):<br>required: **false**<br><p>The owner field is not present in <code>ListObjectsV2</code> by default. If you want to return the owner field with each key in the result, then set the <code>FetchOwner</code> field to <code>true</code>.</p><note>  <p><b>Directory buckets</b> - For directory buckets, the bucket owner is returned as the object owner for all objects.</p> </note><br>

    ///   - [`start_after(impl Into<String>)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::start_after) / [`set_start_after(Option<String>)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::set_start_after):<br>required: **false**<br><p>StartAfter is where you want Amazon S3 to start listing from. Amazon S3 starts listing after this specified key. StartAfter can be any key in the bucket.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`request_payer(RequestPayer)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::request_payer) / [`set_request_payer(Option<RequestPayer>)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::set_request_payer):<br>required: **false**<br><p>Confirms that the requester knows that she or he will be charged for the list objects request in V2 style. Bucket owners need not specify this parameter in their requests.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    ///   - [`expected_bucket_owner(impl Into<String>)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::expected_bucket_owner) / [`set_expected_bucket_owner(Option<String>)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::set_expected_bucket_owner):<br>required: **false**<br><p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p><br>

    ///   - [`optional_object_attributes(OptionalObjectAttributes)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::optional_object_attributes) / [`set_optional_object_attributes(Option<Vec::<OptionalObjectAttributes>>)`](crate::operation::list_objects_v2::builders::ListObjectsV2FluentBuilder::set_optional_object_attributes):<br>required: **false**<br><p>Specifies the optional fields that you want returned in the response. Fields that you do not specify are not returned.</p><note>  <p>This functionality is not supported for directory buckets.</p> </note><br>

    /// - On success, responds with [`ListObjectsV2Output`](crate::operation::list_objects_v2::ListObjectsV2Output) with field(s):

    ///   - [`is_truncated(Option<bool>)`](crate::operation::list_objects_v2::ListObjectsV2Output::is_truncated): <p>Set to <code>false</code> if all of the results were returned. Set to <code>true</code> if more keys are available to return. If the number of results exceeds that specified by <code>MaxKeys</code>, all of the results might not be returned.</p>