Struct aws_sdk_dynamodb :: operation :: execute_statement :: builders :: ExecuteStatementFluentBuilder Copy item path

impl ExecuteStatementFluentBuilder

pub fn as_input(&self) -> &ExecuteStatementInputBuilder

Access the ExecuteStatement as a reference.

pub async fn send( self, ) -> Result<ExecuteStatementOutput, SdkError<ExecuteStatementError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn customize( self, ) -> CustomizableOperation<ExecuteStatementOutput, ExecuteStatementError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn statement(self, input: impl Into<String>) -> Self

The PartiQL statement representing the operation to run.

pub fn set_statement(self, input: Option<String>) -> Self

The PartiQL statement representing the operation to run.

pub fn get_statement(&self) -> &Option<String>

The PartiQL statement representing the operation to run.

pub fn parameters(self, input: AttributeValue) -> Self

Appends an item to Parameters.

To override the contents of this collection use set_parameters.

The parameters for the PartiQL statement, if any.

pub fn set_parameters(self, input: Option<Vec<AttributeValue>>) -> Self

The parameters for the PartiQL statement, if any.

pub fn get_parameters(&self) -> &Option<Vec<AttributeValue>>

The parameters for the PartiQL statement, if any.

pub fn consistent_read(self, input: bool) -> Self

The consistency of a read operation. If set to true, then a strongly consistent read is used; otherwise, an eventually consistent read is used.

pub fn set_consistent_read(self, input: Option<bool>) -> Self

The consistency of a read operation. If set to true, then a strongly consistent read is used; otherwise, an eventually consistent read is used.

pub fn get_consistent_read(&self) -> &Option<bool>

The consistency of a read operation. If set to true, then a strongly consistent read is used; otherwise, an eventually consistent read is used.

pub fn next_token(self, input: impl Into<String>) -> Self

Set this value to get remaining results, if NextToken was returned in the statement response.

pub fn set_next_token(self, input: Option<String>) -> Self

Set this value to get remaining results, if NextToken was returned in the statement response.

pub fn get_next_token(&self) -> &Option<String>

Set this value to get remaining results, if NextToken was returned in the statement response.

pub fn return_consumed_capacity(self, input: ReturnConsumedCapacity) -> Self

Determines the level of detail about either provisioned or on-demand throughput consumption that is returned in the response:

INDEXES - The response includes the aggregate ConsumedCapacity for the operation, together with ConsumedCapacity for each table and secondary index that was accessed.

Note that some operations, such as GetItem and BatchGetItem, do not access any indexes at all. In these cases, specifying INDEXES will only return ConsumedCapacity information for table(s).
TOTAL - The response includes only the aggregate ConsumedCapacity for the operation.
NONE - No ConsumedCapacity details are included in the response.

pub fn set_return_consumed_capacity( self, input: Option<ReturnConsumedCapacity>, ) -> Self

Determines the level of detail about either provisioned or on-demand throughput consumption that is returned in the response:

INDEXES - The response includes the aggregate ConsumedCapacity for the operation, together with ConsumedCapacity for each table and secondary index that was accessed.

Note that some operations, such as GetItem and BatchGetItem, do not access any indexes at all. In these cases, specifying INDEXES will only return ConsumedCapacity information for table(s).
TOTAL - The response includes only the aggregate ConsumedCapacity for the operation.
NONE - No ConsumedCapacity details are included in the response.

pub fn get_return_consumed_capacity(&self) -> &Option<ReturnConsumedCapacity>

Determines the level of detail about either provisioned or on-demand throughput consumption that is returned in the response:

INDEXES - The response includes the aggregate ConsumedCapacity for the operation, together with ConsumedCapacity for each table and secondary index that was accessed.

Note that some operations, such as GetItem and BatchGetItem, do not access any indexes at all. In these cases, specifying INDEXES will only return ConsumedCapacity information for table(s).
TOTAL - The response includes only the aggregate ConsumedCapacity for the operation.
NONE - No ConsumedCapacity details are included in the response.

pub fn limit(self, input: i32) -> Self

The maximum number of items to evaluate (not necessarily the number of matching items). If DynamoDB processes the number of items up to the limit while processing the results, it stops the operation and returns the matching values up to that point, along with a key in LastEvaluatedKey to apply in a subsequent operation so you can pick up where you left off. Also, if the processed dataset size exceeds 1 MB before DynamoDB reaches this limit, it stops the operation and returns the matching values up to the limit, and a key in LastEvaluatedKey to apply in a subsequent operation to continue the operation.

pub fn set_limit(self, input: Option<i32>) -> Self

The maximum number of items to evaluate (not necessarily the number of matching items). If DynamoDB processes the number of items up to the limit while processing the results, it stops the operation and returns the matching values up to that point, along with a key in LastEvaluatedKey to apply in a subsequent operation so you can pick up where you left off. Also, if the processed dataset size exceeds 1 MB before DynamoDB reaches this limit, it stops the operation and returns the matching values up to the limit, and a key in LastEvaluatedKey to apply in a subsequent operation to continue the operation.

pub fn get_limit(&self) -> &Option<i32>

The maximum number of items to evaluate (not necessarily the number of matching items). If DynamoDB processes the number of items up to the limit while processing the results, it stops the operation and returns the matching values up to that point, along with a key in LastEvaluatedKey to apply in a subsequent operation so you can pick up where you left off. Also, if the processed dataset size exceeds 1 MB before DynamoDB reaches this limit, it stops the operation and returns the matching values up to the limit, and a key in LastEvaluatedKey to apply in a subsequent operation to continue the operation.

pub fn return_values_on_condition_check_failure( self, input: ReturnValuesOnConditionCheckFailure, ) -> Self

An optional parameter that returns the item attributes for an ExecuteStatement operation that failed a condition check.

There is no additional cost associated with requesting a return value aside from the small network and processing overhead of receiving a larger response. No read capacity units are consumed.

pub fn set_return_values_on_condition_check_failure( self, input: Option<ReturnValuesOnConditionCheckFailure>, ) -> Self

An optional parameter that returns the item attributes for an ExecuteStatement operation that failed a condition check.

There is no additional cost associated with requesting a return value aside from the small network and processing overhead of receiving a larger response. No read capacity units are consumed.

pub fn get_return_values_on_condition_check_failure( &self, ) -> &Option<ReturnValuesOnConditionCheckFailure>

An optional parameter that returns the item attributes for an ExecuteStatement operation that failed a condition check.

There is no additional cost associated with requesting a return value aside from the small network and processing overhead of receiving a larger response. No read capacity units are consumed.

Trait Implementations§

impl Clone for ExecuteStatementFluentBuilder

fn clone(&self) -> ExecuteStatementFluentBuilder

Returns a copy of the value. Read more

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for ExecuteStatementFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

impl !UnwindSafe for ExecuteStatementFluentBuilder

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CloneToUninit for T
where T: Clone,

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dst. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.

impl<T> Paint for T
where T: ?Sized,

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Primary].

§Example

println!("{}", value.primary());

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color::Fixed].

§Example

println!("{}", value.fixed(color));

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color::Rgb].

§Example

println!("{}", value.rgb(r, g, b));

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Black].

§Example

println!("{}", value.black());

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Red].

§Example

println!("{}", value.red());

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Green].

§Example

println!("{}", value.green());

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Yellow].

§Example

println!("{}", value.yellow());

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Blue].

§Example

println!("{}", value.blue());

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Magenta].

§Example

println!("{}", value.magenta());

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Cyan].

§Example

println!("{}", value.cyan());

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color::White].

§Example

println!("{}", value.white());

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightBlack].

§Example

println!("{}", value.bright_black());

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightRed].

§Example

println!("{}", value.bright_red());

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightGreen].

§Example

println!("{}", value.bright_green());

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightYellow].

§Example

println!("{}", value.bright_yellow());

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightBlue].

§Example

println!("{}", value.bright_blue());

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightMagenta].

§Example

println!("{}", value.bright_magenta());

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightCyan].

§Example

println!("{}", value.bright_cyan());

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightWhite].

§Example

println!("{}", value.bright_white());

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Primary].

§Example

println!("{}", value.on_primary());

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color::Fixed].

§Example

println!("{}", value.on_fixed(color));

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color::Rgb].

§Example

println!("{}", value.on_rgb(r, g, b));

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Black].

§Example

println!("{}", value.on_black());

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Red].

§Example

println!("{}", value.on_red());

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Green].

§Example

println!("{}", value.on_green());

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Yellow].

§Example

println!("{}", value.on_yellow());

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Blue].

§Example

println!("{}", value.on_blue());

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Magenta].

§Example

println!("{}", value.on_magenta());

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Cyan].

§Example

println!("{}", value.on_cyan());

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color::White].

§Example

println!("{}", value.on_white());

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightBlack].

§Example

println!("{}", value.on_bright_black());

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightRed].

§Example

println!("{}", value.on_bright_red());

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightGreen].

§Example

println!("{}", value.on_bright_green());

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightYellow].

§Example

println!("{}", value.on_bright_yellow());

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightBlue].

§Example

println!("{}", value.on_bright_blue());

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightMagenta].

§Example

println!("{}", value.on_bright_magenta());

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightCyan].

§Example

println!("{}", value.on_bright_cyan());

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightWhite].

§Example

println!("{}", value.on_bright_white());

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling [Attribute] value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Bold].

§Example

println!("{}", value.bold());

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Dim].

§Example

println!("{}", value.dim());

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Italic].

§Example

println!("{}", value.italic());

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Underline].

§Example

println!("{}", value.underline());

fn blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Blink].

§Example

println!("{}", value.blink());

fn rapid_blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::RapidBlink].

§Example

println!("{}", value.rapid_blink());

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Invert].

§Example

println!("{}", value.invert());

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Conceal].

§Example

println!("{}", value.conceal());

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Strike].

§Example

println!("{}", value.strike());

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi [Quirk] value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Mask].

§Example

println!("{}", value.mask());

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Wrap].

§Example

println!("{}", value.wrap());

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Linger].

§Example

println!("{}", value.linger());

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk::Clear].

§Example

println!("{}", value.clear());

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Resetting].

§Example

println!("{}", value.resetting());

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Bright].

§Example

println!("{}", value.bright());

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::OnBright].

§Example

println!("{}", value.on_bright());

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the [Condition] value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new [Painted] with a default [Style]. Read more

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more

impl<T> Same for T

type Output = T

Should always be Self

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, U> TryFrom for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for T
where U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

fn vzip(self) -> V

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more