Struct aws_sdk_dynamodb::operation::update_global_table::builders::UpdateGlobalTableFluentBuilder
source · pub struct UpdateGlobalTableFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to UpdateGlobalTable.
Adds or removes replicas in the specified global table. The global table must already exist to be able to use this operation. Any replica to be added must be empty, have the same name as the global table, have the same key schema, have DynamoDB Streams enabled, and have the same provisioned and maximum write capacity units.
For global tables, this operation only applies to global tables using Version 2019.11.21 (Current version), as it provides greater flexibility, higher efficiency and consumes less write capacity than 2017.11.29 (Legacy). To determine which version you are using, see Determining the version. To update existing global tables from version 2017.11.29 (Legacy) to version 2019.11.21 (Current), see Updating global tables.
For global tables, this operation only applies to global tables using Version 2019.11.21 (Current version). If you are using global tables Version 2019.11.21 you can use UpdateTable instead.
Although you can use UpdateGlobalTable to add replicas and remove replicas in a single request, for simplicity we recommend that you issue separate requests for adding or removing replicas.
If global secondary indexes are specified, then the following conditions must also be met:
-
The global secondary indexes must have the same name.
-
The global secondary indexes must have the same hash key and sort key (if present).
-
The global secondary indexes must have the same provisioned and maximum write capacity units.
Implementations§
source§impl UpdateGlobalTableFluentBuilder
impl UpdateGlobalTableFluentBuilder
sourcepub fn as_input(&self) -> &UpdateGlobalTableInputBuilder
pub fn as_input(&self) -> &UpdateGlobalTableInputBuilder
Access the UpdateGlobalTable as a reference.
sourcepub async fn send(
self,
) -> Result<UpdateGlobalTableOutput, SdkError<UpdateGlobalTableError, HttpResponse>>
pub async fn send( self, ) -> Result<UpdateGlobalTableOutput, SdkError<UpdateGlobalTableError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn customize(
self,
) -> CustomizableOperation<UpdateGlobalTableOutput, UpdateGlobalTableError, Self>
pub fn customize( self, ) -> CustomizableOperation<UpdateGlobalTableOutput, UpdateGlobalTableError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
sourcepub fn global_table_name(self, input: impl Into<String>) -> Self
pub fn global_table_name(self, input: impl Into<String>) -> Self
The global table name.
sourcepub fn set_global_table_name(self, input: Option<String>) -> Self
pub fn set_global_table_name(self, input: Option<String>) -> Self
The global table name.
sourcepub fn get_global_table_name(&self) -> &Option<String>
pub fn get_global_table_name(&self) -> &Option<String>
The global table name.
sourcepub fn replica_updates(self, input: ReplicaUpdate) -> Self
pub fn replica_updates(self, input: ReplicaUpdate) -> Self
Appends an item to ReplicaUpdates.
To override the contents of this collection use set_replica_updates.
A list of Regions that should be added or removed from the global table.
sourcepub fn set_replica_updates(self, input: Option<Vec<ReplicaUpdate>>) -> Self
pub fn set_replica_updates(self, input: Option<Vec<ReplicaUpdate>>) -> Self
A list of Regions that should be added or removed from the global table.
sourcepub fn get_replica_updates(&self) -> &Option<Vec<ReplicaUpdate>>
pub fn get_replica_updates(&self) -> &Option<Vec<ReplicaUpdate>>
A list of Regions that should be added or removed from the global table.
Trait Implementations§
source§impl Clone for UpdateGlobalTableFluentBuilder
impl Clone for UpdateGlobalTableFluentBuilder
source§fn clone(&self) -> UpdateGlobalTableFluentBuilder
fn clone(&self) -> UpdateGlobalTableFluentBuilder
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for UpdateGlobalTableFluentBuilder
impl !RefUnwindSafe for UpdateGlobalTableFluentBuilder
impl Send for UpdateGlobalTableFluentBuilder
impl Sync for UpdateGlobalTableFluentBuilder
impl Unpin for UpdateGlobalTableFluentBuilder
impl !UnwindSafe for UpdateGlobalTableFluentBuilder
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§default unsafe fn clone_to_uninit(&self, dst: *mut T)
default unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit)§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
source§impl<T> IntoEither for T
impl<T> IntoEither for T
source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moresource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read more§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling [Attribute] value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi [Quirk] value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the [Condition] value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);