Struct aws_sdk_ssooidc::operation::create_token_with_iam::CreateTokenWithIamInput

source · 
#[non_exhaustive]
pub struct CreateTokenWithIamInput {
    pub client_id: Option<String>,
    pub grant_type: Option<String>,
    pub code: Option<String>,
    pub refresh_token: Option<String>,
    pub assertion: Option<String>,
    pub scope: Option<Vec<String>>,
    pub redirect_uri: Option<String>,
    pub subject_token: Option<String>,
    pub subject_token_type: Option<String>,
    pub requested_token_type: Option<String>,
    pub code_verifier: Option<String>,
}

Fields (Non-exhaustive)§

This struct is marked as non-exhaustive
Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.
§client_id: Option<String>

The unique identifier string for the client or application. This value is an application ARN that has OAuth grants configured.

§grant_type: Option<String>

Supports the following OAuth grant types: Authorization Code, Refresh Token, JWT Bearer, and Token Exchange. Specify one of the following values, depending on the grant type that you want:

* Authorization Code - authorization_code

* Refresh Token - refresh_token

* JWT Bearer - urn:ietf:params:oauth:grant-type:jwt-bearer

* Token Exchange - urn:ietf:params:oauth:grant-type:token-exchange

§code: Option<String>

Used only when calling this API for the Authorization Code grant type. This short-term code is used to identify this authorization request. The code is obtained through a redirect from IAM Identity Center to a redirect URI persisted in the Authorization Code GrantOptions for the application.

§refresh_token: Option<String>

Used only when calling this API for the Refresh Token grant type. This token is used to refresh short-term tokens, such as the access token, that might expire.

For more information about the features and limitations of the current IAM Identity Center OIDC implementation, see Considerations for Using this Guide in the IAM Identity Center OIDC API Reference.

§assertion: Option<String>

Used only when calling this API for the JWT Bearer grant type. This value specifies the JSON Web Token (JWT) issued by a trusted token issuer. To authorize a trusted token issuer, configure the JWT Bearer GrantOptions for the application.

§scope: Option<Vec<String>>

The list of scopes for which authorization is requested. The access token that is issued is limited to the scopes that are granted. If the value is not specified, IAM Identity Center authorizes all scopes configured for the application, including the following default scopes: openid, aws, sts:identity_context.

§redirect_uri: Option<String>

Used only when calling this API for the Authorization Code grant type. This value specifies the location of the client or application that has registered to receive the authorization code.

§subject_token: Option<String>

Used only when calling this API for the Token Exchange grant type. This value specifies the subject of the exchange. The value of the subject token must be an access token issued by IAM Identity Center to a different client or application. The access token must have authorized scopes that indicate the requested application as a target audience.

§subject_token_type: Option<String>

Used only when calling this API for the Token Exchange grant type. This value specifies the type of token that is passed as the subject of the exchange. The following value is supported:

* Access Token - urn:ietf:params:oauth:token-type:access_token

§requested_token_type: Option<String>

Used only when calling this API for the Token Exchange grant type. This value specifies the type of token that the requester can receive. The following values are supported:

* Access Token - urn:ietf:params:oauth:token-type:access_token

* Refresh Token - urn:ietf:params:oauth:token-type:refresh_token

§code_verifier: Option<String>

Used only when calling this API for the Authorization Code grant type. This value is generated by the client and presented to validate the original code challenge value the client passed at authorization time.

Implementations§

source§

impl CreateTokenWithIamInput

source

pub fn client_id(&self) -> Option<&str>

The unique identifier string for the client or application. This value is an application ARN that has OAuth grants configured.

source

pub fn grant_type(&self) -> Option<&str>

Supports the following OAuth grant types: Authorization Code, Refresh Token, JWT Bearer, and Token Exchange. Specify one of the following values, depending on the grant type that you want:

* Authorization Code - authorization_code

* Refresh Token - refresh_token

* JWT Bearer - urn:ietf:params:oauth:grant-type:jwt-bearer

* Token Exchange - urn:ietf:params:oauth:grant-type:token-exchange

source

pub fn code(&self) -> Option<&str>

Used only when calling this API for the Authorization Code grant type. This short-term code is used to identify this authorization request. The code is obtained through a redirect from IAM Identity Center to a redirect URI persisted in the Authorization Code GrantOptions for the application.

source

pub fn refresh_token(&self) -> Option<&str>

Used only when calling this API for the Refresh Token grant type. This token is used to refresh short-term tokens, such as the access token, that might expire.

For more information about the features and limitations of the current IAM Identity Center OIDC implementation, see Considerations for Using this Guide in the IAM Identity Center OIDC API Reference.

source

pub fn assertion(&self) -> Option<&str>

Used only when calling this API for the JWT Bearer grant type. This value specifies the JSON Web Token (JWT) issued by a trusted token issuer. To authorize a trusted token issuer, configure the JWT Bearer GrantOptions for the application.

source

pub fn scope(&self) -> &[String]

The list of scopes for which authorization is requested. The access token that is issued is limited to the scopes that are granted. If the value is not specified, IAM Identity Center authorizes all scopes configured for the application, including the following default scopes: openid, aws, sts:identity_context.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .scope.is_none().

source

pub fn redirect_uri(&self) -> Option<&str>

Used only when calling this API for the Authorization Code grant type. This value specifies the location of the client or application that has registered to receive the authorization code.

source

pub fn subject_token(&self) -> Option<&str>

Used only when calling this API for the Token Exchange grant type. This value specifies the subject of the exchange. The value of the subject token must be an access token issued by IAM Identity Center to a different client or application. The access token must have authorized scopes that indicate the requested application as a target audience.

source

pub fn subject_token_type(&self) -> Option<&str>

Used only when calling this API for the Token Exchange grant type. This value specifies the type of token that is passed as the subject of the exchange. The following value is supported:

* Access Token - urn:ietf:params:oauth:token-type:access_token

source

pub fn requested_token_type(&self) -> Option<&str>

Used only when calling this API for the Token Exchange grant type. This value specifies the type of token that the requester can receive. The following values are supported:

* Access Token - urn:ietf:params:oauth:token-type:access_token

* Refresh Token - urn:ietf:params:oauth:token-type:refresh_token

source

pub fn code_verifier(&self) -> Option<&str>

Used only when calling this API for the Authorization Code grant type. This value is generated by the client and presented to validate the original code challenge value the client passed at authorization time.

source§

impl CreateTokenWithIamInput

source

pub fn builder() -> CreateTokenWithIamInputBuilder

Creates a new builder-style object to manufacture CreateTokenWithIamInput.

Trait Implementations§

source§

impl Clone for CreateTokenWithIamInput

source§

fn clone(&self) -> CreateTokenWithIamInput

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for CreateTokenWithIamInput

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl PartialEq for CreateTokenWithIamInput

source§

fn eq(&self, other: &CreateTokenWithIamInput) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl StructuralPartialEq for CreateTokenWithIamInput

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
§

impl<T> Paint for T
where T: ?Sized,

§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Primary].

§Example
println!("{}", value.primary());
§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color::Fixed].

§Example
println!("{}", value.fixed(color));
§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color::Rgb].

§Example
println!("{}", value.rgb(r, g, b));
§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Black].

§Example
println!("{}", value.black());
§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Red].

§Example
println!("{}", value.red());
§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Green].

§Example
println!("{}", value.green());
§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Yellow].

§Example
println!("{}", value.yellow());
§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Blue].

§Example
println!("{}", value.blue());
§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Magenta].

§Example
println!("{}", value.magenta());
§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Cyan].

§Example
println!("{}", value.cyan());
§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color::White].

§Example
println!("{}", value.white());
§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightBlack].

§Example
println!("{}", value.bright_black());
§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightRed].

§Example
println!("{}", value.bright_red());
§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightGreen].

§Example
println!("{}", value.bright_green());
§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightYellow].

§Example
println!("{}", value.bright_yellow());
§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightBlue].

§Example
println!("{}", value.bright_blue());
§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightMagenta].

§Example
println!("{}", value.bright_magenta());
§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightCyan].

§Example
println!("{}", value.bright_cyan());
§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightWhite].

§Example
println!("{}", value.bright_white());
§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Primary].

§Example
println!("{}", value.on_primary());
§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color::Fixed].

§Example
println!("{}", value.on_fixed(color));
§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color::Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Black].

§Example
println!("{}", value.on_black());
§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Red].

§Example
println!("{}", value.on_red());
§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Green].

§Example
println!("{}", value.on_green());
§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Yellow].

§Example
println!("{}", value.on_yellow());
§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Blue].

§Example
println!("{}", value.on_blue());
§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Magenta].

§Example
println!("{}", value.on_magenta());
§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Cyan].

§Example
println!("{}", value.on_cyan());
§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color::White].

§Example
println!("{}", value.on_white());
§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightBlack].

§Example
println!("{}", value.on_bright_black());
§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightRed].

§Example
println!("{}", value.on_bright_red());
§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightGreen].

§Example
println!("{}", value.on_bright_green());
§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightBlue].

§Example
println!("{}", value.on_bright_blue());
§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightWhite].

§Example
println!("{}", value.on_bright_white());
§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling [Attribute] value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Bold].

§Example
println!("{}", value.bold());
§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Dim].

§Example
println!("{}", value.dim());
§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Italic].

§Example
println!("{}", value.italic());
§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute::Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute::RapidBlink].

§Example
println!("{}", value.rapid_blink());
§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Invert].

§Example
println!("{}", value.invert());
§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Conceal].

§Example
println!("{}", value.conceal());
§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Strike].

§Example
println!("{}", value.strike());
§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi [Quirk] value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Mask].

§Example
println!("{}", value.mask());
§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Wrap].

§Example
println!("{}", value.wrap());
§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Linger].

§Example
println!("{}", value.linger());
§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk::Clear].

§Example
println!("{}", value.clear());
§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Resetting].

§Example
println!("{}", value.resetting());
§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Bright].

§Example
println!("{}", value.bright());
§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::OnBright].

§Example
println!("{}", value.on_bright());
§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the [Condition] value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new [Painted] with a default [Style]. Read more
§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more