Struct aws_sdk_sts :: operation :: get_session_token :: builders :: GetSessionTokenInputBuilder Copy item path

impl GetSessionTokenInputBuilder

pub fn duration_seconds(self, input: i32) -> Self

The duration, in seconds, that the credentials should remain valid. Acceptable durations for IAM user sessions range from 900 seconds (15 minutes) to 129,600 seconds (36 hours), with 43,200 seconds (12 hours) as the default. Sessions for Amazon Web Services account owners are restricted to a maximum of 3,600 seconds (one hour). If the duration is longer than one hour, the session for Amazon Web Services account owners defaults to one hour.

pub fn set_duration_seconds(self, input: Option<i32>) -> Self

The duration, in seconds, that the credentials should remain valid. Acceptable durations for IAM user sessions range from 900 seconds (15 minutes) to 129,600 seconds (36 hours), with 43,200 seconds (12 hours) as the default. Sessions for Amazon Web Services account owners are restricted to a maximum of 3,600 seconds (one hour). If the duration is longer than one hour, the session for Amazon Web Services account owners defaults to one hour.

pub fn get_duration_seconds(&self) -> &Option<i32>

The duration, in seconds, that the credentials should remain valid. Acceptable durations for IAM user sessions range from 900 seconds (15 minutes) to 129,600 seconds (36 hours), with 43,200 seconds (12 hours) as the default. Sessions for Amazon Web Services account owners are restricted to a maximum of 3,600 seconds (one hour). If the duration is longer than one hour, the session for Amazon Web Services account owners defaults to one hour.

pub fn serial_number(self, input: impl Into<String>) -> Self

The identification number of the MFA device that is associated with the IAM user who is making the GetSessionToken call. Specify this value if the IAM user has a policy that requires MFA authentication. The value is either the serial number for a hardware device (such as GAHT12345678) or an Amazon Resource Name (ARN) for a virtual device (such as arn:aws:iam::123456789012:mfa/user). You can find the device for an IAM user by going to the Amazon Web Services Management Console and viewing the user's security credentials.

The regex used to validate this parameter is a string of characters consisting of upper- and lower-case alphanumeric characters with no spaces. You can also include underscores or any of the following characters: =,.@:/-

pub fn set_serial_number(self, input: Option<String>) -> Self

The identification number of the MFA device that is associated with the IAM user who is making the GetSessionToken call. Specify this value if the IAM user has a policy that requires MFA authentication. The value is either the serial number for a hardware device (such as GAHT12345678) or an Amazon Resource Name (ARN) for a virtual device (such as arn:aws:iam::123456789012:mfa/user). You can find the device for an IAM user by going to the Amazon Web Services Management Console and viewing the user's security credentials.

The regex used to validate this parameter is a string of characters consisting of upper- and lower-case alphanumeric characters with no spaces. You can also include underscores or any of the following characters: =,.@:/-

pub fn get_serial_number(&self) -> &Option<String>

The identification number of the MFA device that is associated with the IAM user who is making the GetSessionToken call. Specify this value if the IAM user has a policy that requires MFA authentication. The value is either the serial number for a hardware device (such as GAHT12345678) or an Amazon Resource Name (ARN) for a virtual device (such as arn:aws:iam::123456789012:mfa/user). You can find the device for an IAM user by going to the Amazon Web Services Management Console and viewing the user's security credentials.

The regex used to validate this parameter is a string of characters consisting of upper- and lower-case alphanumeric characters with no spaces. You can also include underscores or any of the following characters: =,.@:/-

pub fn token_code(self, input: impl Into<String>) -> Self

The value provided by the MFA device, if MFA is required. If any policy requires the IAM user to submit an MFA code, specify this value. If MFA authentication is required, the user must provide a code when requesting a set of temporary security credentials. A user who fails to provide the code receives an "access denied" response when requesting resources that require MFA authentication.

The format for this parameter, as described by its regex pattern, is a sequence of six numeric digits.

pub fn set_token_code(self, input: Option<String>) -> Self

The value provided by the MFA device, if MFA is required. If any policy requires the IAM user to submit an MFA code, specify this value. If MFA authentication is required, the user must provide a code when requesting a set of temporary security credentials. A user who fails to provide the code receives an "access denied" response when requesting resources that require MFA authentication.

The format for this parameter, as described by its regex pattern, is a sequence of six numeric digits.

pub fn get_token_code(&self) -> &Option<String>

The value provided by the MFA device, if MFA is required. If any policy requires the IAM user to submit an MFA code, specify this value. If MFA authentication is required, the user must provide a code when requesting a set of temporary security credentials. A user who fails to provide the code receives an "access denied" response when requesting resources that require MFA authentication.

The format for this parameter, as described by its regex pattern, is a sequence of six numeric digits.

pub fn build(self) -> Result<GetSessionTokenInput, BuildError>

Consumes the builder and constructs a GetSessionTokenInput.

impl GetSessionTokenInputBuilder

pub async fn send_with( self, client: &Client, ) -> Result<GetSessionTokenOutput, SdkError<GetSessionTokenError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations§

impl Clone for GetSessionTokenInputBuilder

fn clone(&self) -> GetSessionTokenInputBuilder

Returns a copy of the value. Read more

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for GetSessionTokenInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Default for GetSessionTokenInputBuilder

fn default() -> GetSessionTokenInputBuilder

Returns the “default value” for a type. Read more

impl PartialEq for GetSessionTokenInputBuilder

fn eq(&self, other: &GetSessionTokenInputBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.

1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for GetSessionTokenInputBuilder

Auto Trait Implementations§

impl UnwindSafe for GetSessionTokenInputBuilder

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CloneToUninit for T
where T: Clone,

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dst. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.

impl<T> Paint for T
where T: ?Sized,

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Primary].

§Example

println!("{}", value.primary());

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color::Fixed].

§Example

println!("{}", value.fixed(color));

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color::Rgb].

§Example

println!("{}", value.rgb(r, g, b));

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Black].

§Example

println!("{}", value.black());

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Red].

§Example

println!("{}", value.red());

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Green].

§Example

println!("{}", value.green());

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Yellow].

§Example

println!("{}", value.yellow());

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Blue].

§Example

println!("{}", value.blue());

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Magenta].

§Example

println!("{}", value.magenta());

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Cyan].

§Example

println!("{}", value.cyan());

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color::White].

§Example

println!("{}", value.white());

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightBlack].

§Example

println!("{}", value.bright_black());

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightRed].

§Example

println!("{}", value.bright_red());

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightGreen].

§Example

println!("{}", value.bright_green());

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightYellow].

§Example

println!("{}", value.bright_yellow());

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightBlue].

§Example

println!("{}", value.bright_blue());

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightMagenta].

§Example

println!("{}", value.bright_magenta());

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightCyan].

§Example

println!("{}", value.bright_cyan());

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightWhite].

§Example

println!("{}", value.bright_white());

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Primary].

§Example

println!("{}", value.on_primary());

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color::Fixed].

§Example

println!("{}", value.on_fixed(color));

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color::Rgb].

§Example

println!("{}", value.on_rgb(r, g, b));

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Black].

§Example

println!("{}", value.on_black());

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Red].

§Example

println!("{}", value.on_red());

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Green].

§Example

println!("{}", value.on_green());

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Yellow].

§Example

println!("{}", value.on_yellow());

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Blue].

§Example

println!("{}", value.on_blue());

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Magenta].

§Example

println!("{}", value.on_magenta());

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Cyan].

§Example

println!("{}", value.on_cyan());

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color::White].

§Example

println!("{}", value.on_white());

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightBlack].

§Example

println!("{}", value.on_bright_black());

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightRed].

§Example

println!("{}", value.on_bright_red());

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightGreen].

§Example

println!("{}", value.on_bright_green());

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightYellow].

§Example

println!("{}", value.on_bright_yellow());

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightBlue].

§Example

println!("{}", value.on_bright_blue());

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightMagenta].

§Example

println!("{}", value.on_bright_magenta());

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightCyan].

§Example

println!("{}", value.on_bright_cyan());

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightWhite].

§Example

println!("{}", value.on_bright_white());

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling [Attribute] value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Bold].

§Example

println!("{}", value.bold());

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Dim].

§Example

println!("{}", value.dim());

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Italic].

§Example

println!("{}", value.italic());

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Underline].

§Example

println!("{}", value.underline());

fn blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Blink].

§Example

println!("{}", value.blink());

fn rapid_blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::RapidBlink].

§Example

println!("{}", value.rapid_blink());

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Invert].

§Example

println!("{}", value.invert());

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Conceal].

§Example

println!("{}", value.conceal());

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Strike].

§Example

println!("{}", value.strike());

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi [Quirk] value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Mask].

§Example

println!("{}", value.mask());

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Wrap].

§Example

println!("{}", value.wrap());

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Linger].

§Example

println!("{}", value.linger());

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk::Clear].

§Example

println!("{}", value.clear());

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Resetting].

§Example

println!("{}", value.resetting());

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Bright].

§Example

println!("{}", value.bright());

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::OnBright].

§Example

println!("{}", value.on_bright());

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the [Condition] value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new [Painted] with a default [Style]. Read more

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more

impl<T> Same for T

type Output = T

Should always be Self

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, U> TryFrom for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for T
where U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

fn vzip(self) -> V

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more