Struct aws_sdk_transcribestreaming::operation::start_medical_stream_transcription::builders::StartMedicalStreamTranscriptionInputBuilder

impl StartMedicalStreamTranscriptionInputBuilder

pub fn language_code(self, input: LanguageCode) -> Self

Specify the language code that represents the language spoken in your audio.

Amazon Transcribe Medical only supports US English (en-US).

This field is required.

pub fn set_language_code(self, input: Option<LanguageCode>) -> Self

Specify the language code that represents the language spoken in your audio.

Amazon Transcribe Medical only supports US English (en-US).

pub fn get_language_code(&self) -> &Option<LanguageCode>

Specify the language code that represents the language spoken in your audio.

Amazon Transcribe Medical only supports US English (en-US).

pub fn media_sample_rate_hertz(self, input: i32) -> Self

The sample rate of the input audio (in hertz). Amazon Transcribe Medical supports a range from 16,000 Hz to 48,000 Hz. Note that the sample rate you specify must match that of your audio.

This field is required.

pub fn set_media_sample_rate_hertz(self, input: Option<i32>) -> Self

The sample rate of the input audio (in hertz). Amazon Transcribe Medical supports a range from 16,000 Hz to 48,000 Hz. Note that the sample rate you specify must match that of your audio.

pub fn get_media_sample_rate_hertz(&self) -> &Option<i32>

The sample rate of the input audio (in hertz). Amazon Transcribe Medical supports a range from 16,000 Hz to 48,000 Hz. Note that the sample rate you specify must match that of your audio.

pub fn media_encoding(self, input: MediaEncoding) -> Self

Specify the encoding used for the input audio. Supported formats are:

FLAC
OPUS-encoded audio in an Ogg container
PCM (only signed 16-bit little-endian audio formats, which does not include WAV)

For more information, see Media formats.

This field is required.

pub fn set_media_encoding(self, input: Option<MediaEncoding>) -> Self

Specify the encoding used for the input audio. Supported formats are:

FLAC
OPUS-encoded audio in an Ogg container
PCM (only signed 16-bit little-endian audio formats, which does not include WAV)

For more information, see Media formats.

pub fn get_media_encoding(&self) -> &Option<MediaEncoding>

Specify the encoding used for the input audio. Supported formats are:

FLAC
OPUS-encoded audio in an Ogg container
PCM (only signed 16-bit little-endian audio formats, which does not include WAV)

For more information, see Media formats.

pub fn vocabulary_name(self, input: impl Into<String>) -> Self

Specify the name of the custom vocabulary that you want to use when processing your transcription. Note that vocabulary names are case sensitive.

pub fn set_vocabulary_name(self, input: Option<String>) -> Self

Specify the name of the custom vocabulary that you want to use when processing your transcription. Note that vocabulary names are case sensitive.

pub fn get_vocabulary_name(&self) -> &Option<String>

Specify the name of the custom vocabulary that you want to use when processing your transcription. Note that vocabulary names are case sensitive.

pub fn specialty(self, input: Specialty) -> Self

Specify the medical specialty contained in your audio.

This field is required.

pub fn set_specialty(self, input: Option<Specialty>) -> Self

Specify the medical specialty contained in your audio.

pub fn get_specialty(&self) -> &Option<Specialty>

Specify the medical specialty contained in your audio.

pub fn type(self, input: Type) -> Self

Specify the type of input audio. For example, choose DICTATION for a provider dictating patient notes and CONVERSATION for a dialogue between a patient and a medical professional.

This field is required.

pub fn set_type(self, input: Option<Type>) -> Self

Specify the type of input audio. For example, choose DICTATION for a provider dictating patient notes and CONVERSATION for a dialogue between a patient and a medical professional.

pub fn get_type(&self) -> &Option<Type>

Specify the type of input audio. For example, choose DICTATION for a provider dictating patient notes and CONVERSATION for a dialogue between a patient and a medical professional.

pub fn show_speaker_label(self, input: bool) -> Self

Enables speaker partitioning (diarization) in your transcription output. Speaker partitioning labels the speech from individual speakers in your media file.

For more information, see Partitioning speakers (diarization).

pub fn set_show_speaker_label(self, input: Option<bool>) -> Self

Enables speaker partitioning (diarization) in your transcription output. Speaker partitioning labels the speech from individual speakers in your media file.

For more information, see Partitioning speakers (diarization).

pub fn get_show_speaker_label(&self) -> &Option<bool>

Enables speaker partitioning (diarization) in your transcription output. Speaker partitioning labels the speech from individual speakers in your media file.

For more information, see Partitioning speakers (diarization).

pub fn session_id(self, input: impl Into<String>) -> Self

Specify a name for your transcription session. If you don't include this parameter in your request, Amazon Transcribe Medical generates an ID and returns it in the response.

You can use a session ID to retry a streaming session.

pub fn set_session_id(self, input: Option<String>) -> Self

Specify a name for your transcription session. If you don't include this parameter in your request, Amazon Transcribe Medical generates an ID and returns it in the response.

You can use a session ID to retry a streaming session.

pub fn get_session_id(&self) -> &Option<String>

Specify a name for your transcription session. If you don't include this parameter in your request, Amazon Transcribe Medical generates an ID and returns it in the response.

You can use a session ID to retry a streaming session.

pub fn audio_stream( self, input: EventStreamSender<AudioStream, AudioStreamError>, ) -> Self

An encoded stream of audio blobs. Audio streams are encoded as either HTTP/2 or WebSocket data frames.

For more information, see Transcribing streaming audio.

This field is required.

pub fn set_audio_stream( self, input: Option<EventStreamSender<AudioStream, AudioStreamError>>, ) -> Self

An encoded stream of audio blobs. Audio streams are encoded as either HTTP/2 or WebSocket data frames.

For more information, see Transcribing streaming audio.

pub fn get_audio_stream( &self, ) -> &Option<EventStreamSender<AudioStream, AudioStreamError>>

An encoded stream of audio blobs. Audio streams are encoded as either HTTP/2 or WebSocket data frames.

For more information, see Transcribing streaming audio.

pub fn enable_channel_identification(self, input: bool) -> Self

Enables channel identification in multi-channel audio.

Channel identification transcribes the audio on each channel independently, then appends the output for each channel into one transcript.

If you have multi-channel audio and do not enable channel identification, your audio is transcribed in a continuous manner and your transcript is not separated by channel.

For more information, see Transcribing multi-channel audio.

pub fn set_enable_channel_identification(self, input: Option<bool>) -> Self

Enables channel identification in multi-channel audio.

Channel identification transcribes the audio on each channel independently, then appends the output for each channel into one transcript.

If you have multi-channel audio and do not enable channel identification, your audio is transcribed in a continuous manner and your transcript is not separated by channel.

For more information, see Transcribing multi-channel audio.

pub fn get_enable_channel_identification(&self) -> &Option<bool>

Enables channel identification in multi-channel audio.

Channel identification transcribes the audio on each channel independently, then appends the output for each channel into one transcript.

If you have multi-channel audio and do not enable channel identification, your audio is transcribed in a continuous manner and your transcript is not separated by channel.

For more information, see Transcribing multi-channel audio.

pub fn number_of_channels(self, input: i32) -> Self

Specify the number of channels in your audio stream. Up to two channels are supported.

pub fn set_number_of_channels(self, input: Option<i32>) -> Self

Specify the number of channels in your audio stream. Up to two channels are supported.

pub fn get_number_of_channels(&self) -> &Option<i32>

Specify the number of channels in your audio stream. Up to two channels are supported.

pub fn content_identification_type( self, input: MedicalContentIdentificationType, ) -> Self

Labels all personal health information (PHI) identified in your transcript.

Content identification is performed at the segment level; PHI is flagged upon complete transcription of an audio segment.

For more information, see Identifying personal health information (PHI) in a transcription.

pub fn set_content_identification_type( self, input: Option<MedicalContentIdentificationType>, ) -> Self

Labels all personal health information (PHI) identified in your transcript.

Content identification is performed at the segment level; PHI is flagged upon complete transcription of an audio segment.

For more information, see Identifying personal health information (PHI) in a transcription.

pub fn get_content_identification_type( &self, ) -> &Option<MedicalContentIdentificationType>

Labels all personal health information (PHI) identified in your transcript.

Content identification is performed at the segment level; PHI is flagged upon complete transcription of an audio segment.

For more information, see Identifying personal health information (PHI) in a transcription.

pub fn build(self) -> Result<StartMedicalStreamTranscriptionInput, BuildError>

Consumes the builder and constructs a StartMedicalStreamTranscriptionInput. This method will fail if any of the following fields are not set:

audio_stream

impl StartMedicalStreamTranscriptionInputBuilder

pub async fn send_with( self, client: &Client, ) -> Result<StartMedicalStreamTranscriptionOutput, SdkError<StartMedicalStreamTranscriptionError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations§

impl Debug for StartMedicalStreamTranscriptionInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Default for StartMedicalStreamTranscriptionInputBuilder

fn default() -> StartMedicalStreamTranscriptionInputBuilder

Returns the “default value” for a type. Read more

Auto Trait Implementations§

impl !UnwindSafe for StartMedicalStreamTranscriptionInputBuilder

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.

impl<T> Paint for T
where T: ?Sized,

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Primary].

§Example

println!("{}", value.primary());

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color::Fixed].

§Example

println!("{}", value.fixed(color));

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color::Rgb].

§Example

println!("{}", value.rgb(r, g, b));

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Black].

§Example

println!("{}", value.black());

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Red].

§Example

println!("{}", value.red());

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Green].

§Example

println!("{}", value.green());

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Yellow].

§Example

println!("{}", value.yellow());

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Blue].

§Example

println!("{}", value.blue());

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Magenta].

§Example

println!("{}", value.magenta());

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Cyan].

§Example

println!("{}", value.cyan());

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color::White].

§Example

println!("{}", value.white());

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightBlack].

§Example

println!("{}", value.bright_black());

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightRed].

§Example

println!("{}", value.bright_red());

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightGreen].

§Example

println!("{}", value.bright_green());

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightYellow].

§Example

println!("{}", value.bright_yellow());

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightBlue].

§Example

println!("{}", value.bright_blue());

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightMagenta].

§Example

println!("{}", value.bright_magenta());

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightCyan].

§Example

println!("{}", value.bright_cyan());

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightWhite].

§Example

println!("{}", value.bright_white());

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Primary].

§Example

println!("{}", value.on_primary());

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color::Fixed].

§Example

println!("{}", value.on_fixed(color));

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color::Rgb].

§Example

println!("{}", value.on_rgb(r, g, b));

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Black].

§Example

println!("{}", value.on_black());

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Red].

§Example

println!("{}", value.on_red());

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Green].

§Example

println!("{}", value.on_green());

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Yellow].

§Example

println!("{}", value.on_yellow());

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Blue].

§Example

println!("{}", value.on_blue());

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Magenta].

§Example

println!("{}", value.on_magenta());

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Cyan].

§Example

println!("{}", value.on_cyan());

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color::White].

§Example

println!("{}", value.on_white());

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightBlack].

§Example

println!("{}", value.on_bright_black());

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightRed].

§Example

println!("{}", value.on_bright_red());

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightGreen].

§Example

println!("{}", value.on_bright_green());

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightYellow].

§Example

println!("{}", value.on_bright_yellow());

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightBlue].

§Example

println!("{}", value.on_bright_blue());

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightMagenta].

§Example

println!("{}", value.on_bright_magenta());

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightCyan].

§Example

println!("{}", value.on_bright_cyan());

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightWhite].

§Example

println!("{}", value.on_bright_white());

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling [Attribute] value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Bold].

§Example

println!("{}", value.bold());

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Dim].

§Example

println!("{}", value.dim());

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Italic].

§Example

println!("{}", value.italic());

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Underline].

§Example

println!("{}", value.underline());

fn blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Blink].

§Example

println!("{}", value.blink());

fn rapid_blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::RapidBlink].

§Example

println!("{}", value.rapid_blink());

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Invert].

§Example

println!("{}", value.invert());

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Conceal].

§Example

println!("{}", value.conceal());

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Strike].

§Example

println!("{}", value.strike());

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi [Quirk] value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Mask].

§Example

println!("{}", value.mask());

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Wrap].

§Example

println!("{}", value.wrap());

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Linger].

§Example

println!("{}", value.linger());

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk::Clear].

§Example

println!("{}", value.clear());

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Resetting].

§Example

println!("{}", value.resetting());

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Bright].

§Example

println!("{}", value.bright());

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::OnBright].

§Example

println!("{}", value.on_bright());

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the [Condition] value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new [Painted] with a default [Style]. Read more

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more

impl<T> Same for T

type Output = T

Should always be Self

impl<T, U> TryFrom for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for T
where U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

fn vzip(self) -> V

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more